静力弹塑性分析(Pushover Analysis)的基本原理和计算实例

阐述了美国两本手册FEMA273／274和ATC-40中关于静力弹塑性分析的基本原理和方法，给出了利用ETABS程序进行适合我国地震烈度分析的计算步骤，并用一框剪结构示例予以说明，表明Pushover方法是目前对结构进行在罕遇地震作用下弹塑性分析的有效方法。     

液化土层对地表加速度反应谱的影响

采用一种改进的有效应力方法研究土层液化对地表加速度反应谱的影响，分析中考虑了砂层的厚度、埋深和输入地震波的幅值和波型等因素。分析结果表明，土层液化使地表加速度反应谱的特征周期至少延长0．1秒以上，使原Ⅱ类场地变为Ⅲ类场地，高烈度时易变成Ⅳ类场地，反应谱中周期0．8秒-1．0秒是液化砂层加震或减震的一个分界点，液化对反应谱短周期分量具有一定的减震作用，而对长周期分量有非常显著的放大作用。     

VICARIOUS RADIOMETRIC CALIBRATION OF SATELLITE FY-ID SENSORS AT VISIBLE AND NEAR INFRARED CHANNELS

For the problem of in-flight test site radiometric calibration for the FY-1D Meteorological Satellite onboard sensor's visible and near infrared channels,this paper described the calibration method,satellite-ground synchronous observation data acquired at China Dunhuang Calibration Test Site,parameter derivation and radiative transfer computation during the calibration,and the calibration result analysis.At FY-1D seven channels (with central wavelength at Channels 1:630 nm,2:865 nm;6:1610 nm;7:455 nm,8:505 nm;9:555 nm;10:932 nm),calibration coefficients obtained during the ground site calibration were compared with that respectively of prelaunch calibration.It is demonstrated that results of FY-1D onboard two sensors' (A and B) at channels 1,2,6 and 10 were close to pre-calibration,and the absolute difference of Gobi desert reflectance computed using test site and pre-launch calibration coefficients was no more than 2%. At other channels,large pre-launch calibration errors resulted in a poor consistency between the test site and pre-launch calibration.The errors can be corrected by the test site calibration results. Based on a rough estimation,the overall error of the calibration was about 6%. The paper also presented the in-flight vicarious calibration at the visible and near infrared channels of FY-1C sensor A which was launched in 1999 and has been put into operational mode since 2002.The results exhibit that FY-1C sensor's response has 23% attenuation at Channels 7 and 8,while only minor degradation at the other channels was found. During the mission,calibrations were also conducted at NOAA-17's Channels 1 and 2 (1:430-830 nm,2:500-1072 nm).A very good consistency has been achieved between the test site and pre-launched calibration results.     

黑龙江省及其邻区非构造性地震振动研究

应用周期-频度谱方法对黑龙江省数字地震台网资料进行处理，给出了矿震、电缆应力释放、震源车作业、火山地震等振动的周期-频度谱和链波指数，并对构造地震和爆破的链波指数进行了讨论。针对港震公司的数字地震记录格式编写了专门的处理程序，为数字地震台站开展周期-频度谱分析提供了有力的工具。     

Probability-consistent spectrum and code spectrum

IntroductionInChina,thecombinationofseismicdesigncodewithzoningmapofseismicintensityorgroundmotionparametersisusuallyadoptedtodeterminetheseismicfortificationcriterionforthegeneralindustryandcivilbuildings.Thepresentproceduresareasfollows.Accordingtothepro-jectlocation,thedesignbasicaccelerationofgroundmotionandthedesigncharacteristicperiodofresponsespectrumareobtainedfromthezoningmapofseismicgroundmotionparameters(GeneralAdministrationofQualitySupervision,InspectionandQuarantineofthePeople…     

An attenuation model for distant earthquakes

Large magnitude earthquakes generated at source–site distances exceeding 100km are typified by low‐frequency (long‐period) seismic waves. Such induced ground shaking can be disproportionately destructive due to its high displacement, and possibly high velocity, shaking characteristics. Distant earthquakes represent a potentially significant safety hazard in certain low and moderate seismic regions where seismic activity is governed by major distant sources as opposed to nearby (regional) background sources. Examples are parts of the Indian sub‐continent, Eastern China and Indo‐China. The majority of ground motion attenuation relationships currently available for applications in active seismic regions may not be suitable for handling long‐distance attenuation, since the significance of distant earthquakes is mainly confined to certain low to moderate seismicity regions. Thus, the effects of distant earthquakes are often not accurately represented by conventional empirical models which were typically developed from curve‐fitting earthquake strong‐motion data from active seismic regions. Numerous well‐known existing attenuation relationships are evaluated in this paper, to highlight their limitations in long‐distance applications. In contrast, basic seismological parameters such as the Quality factor (Q‐factor) could provide a far more accurate representation for the distant attenuation behaviour of a region, but such information is seldom used by engineers in any direct manner. The aim of this paper is to develop a set of relationships that provide a convenient link between the seismological Q‐factor (amongst other factors) and response spectrum attenuation. The use of Q as an input parameter to the proposed model enables valuable local seismological information to be incorporated directly into response spectrum predictions. The application of this new modelling approach is demonstrated by examples based on the Chi‐Chi earthquake (Taiwan and South China), Gujarat earthquake (Northwest India), Nisqually earthquake (region surrounding Seattle) and Sumatran‐fault earthquake (recorded in Singapore). Field recordings have been obtained from these events for comparison with the proposed model. The accuracy of the stochastic simulations and the regression analysis have been confirmed by comparisons between the model calculations and the actual field observations. It is emphasized that obtaining representative estimates for Q for input into the model is equally important.Thus, this paper forms part of the long‐term objective of the authors to develop more effective communications across the engineering and seismological disciplines. Copyright © 2003 John Wiley & Sons, Ltd.     

A comparative study on the illite crystallinity and the clay mineral reflectance spectral index for subdividing the very low-grade metamorphic belt along the Lizhou-Hekou geological section in the Youjiang sedimentary basin, Guangxi, China

To examine the application potential of hyperspectral remote sensing techniques in classifying very low-grade metamorphic belts, the composition of clay minerals and the cyrstallinity of illite from mudstones were measured using XRD and VIS-SWIR (400-2500 nm) reflectance spectroscopy. Based on the illite cyrstallinity, Kubler Index (KI), the Early Triassic LuoLou Group and the Middle Triassic lower Baifeng Formation were classified as the lower Epizone with KI△2θ° ranging from 0.22 to 0.25, the upper Baifeng Formation as upper anchizone with KI△2θ°ranging from 0.26 to 0.33, and the Hekou Formation as lower anchizone with KI△2θ° ranging from 0.38 to 0.40. According to a KI△2θ° value of 0.43, it is possible that there may exist a local diagenetic zone in the upper strata. The illite cyrstallinity Kubler index and the metamorphic grade increase from the bottom to the top of the stratigraphic sequence. The metamorphic grade boundaries nearly match the stratigraphic boundaries, indicating a burial metamorphism nature for the stratigraphic sequence. From the bottom to the top of the sequence, the spectral absorption band center of clay minerals from fresh rocks is around 2200 nm. The absorption band centers change towards shorter wavelengths: the Luolou Group being at 2220 nm, the Baifeng Formation at 2217-2213 nm, the lower member of the Hekou Formation at 2214-2206 nm, and the upper member of the Hekou Formation at 2205-2197 nm. The spectral absorption band center of illite shows the same change pattern. These results indicate that very low-grade metamorphic belts can be subdivided using spectral indices of clay minerals, which are measured by using field portable spectroradiometers. However, it may not work well with satellite and airborne sensors.     

阿克苏霜期规律初探

通过分析1971～2000年阿克苏市初、终霜期及无霜期序列，初步探讨了它们的变化趋势、分布频率等气候特征，指出了初霜期推迟、终霜期提前、无霜期增长的变化趋势，而这种变化趋势与气候变暖理论相一致。     

“Three-Component” Digital Prospecting Method：A New Approach for Mineral Resources Quantitative Prediction and Assessment

“Three-component” method consists of three clase-connected aspects: geological anomaly,diversity of mineralization and mineral deposit spectrum. All these three concepts are not new separately, but it is a new approach to combine these three aspects in one single concept for quantitative mineral resources prediction and assessment and it is also the first time to conduct a more detailed study in each aspect. Investigation and clarification of geological anomalies, diversity of mineralization and spectrum of mineral deposits are realized by digitization and quantification of ore forming controlling factors, oreexisting symbols or marks, characteristics of mineralization and regulation of ore-genesis and laws of distribution. These procedures lead to construction of a “digital model“ for mineral resources prediction andassessment.     

应用高光谱遥感数据估算土壤表层水分的研究

土壤水分是土壤的重要组成部分，它在陆地表层和大气之间的物质和能量交换方面扮演着重要角色，寻求快速而准确的方法估算土壤水分具有重要意义。通常，从可见光一近红外对土壤表层水分的估计多是建立在土壤水分与反射率的关系之上的。而在土壤水分含量不高时，土壤水分的增加使土壤光谱反射率在整个波长范围内降低，尤其在760nm，970nm，1190nm，1450nm，1940nm和2950nm等水分吸收波段，而在土壤水分含量较高时，土壤水分的增加会使土壤光谱反射率在某些光谱波段升高。而土壤水分的估计往往是基于土壤水分与土壤水分吸收波段的吸收强度之间的线性关系上，虽然这些经验的方法对于估算某些土壤的表层水分含量是有效的，但这些关系应用于其它条件(如不同种类土壤、土壤湿度变化范围很大的情况)时却面临很多困难，这与土壤的光谱反射率是由土壤的组成成分(土壤水分、有机质、氧化铁和粘土矿物等)的含量和它们在土壤中的分布密切相关。微分技术处理“连续”的光谱是遥感中常用的数学方法，微分技术能部分消除低频光谱成分的影响。现在微分光谱已广泛地应用于研究植被的生物物理参数、矿物和有机质等。然而利用微分光谱对土壤水分反演的研究却鲜见报道。本文通过对实验室中多种不同类型的土壤进行光谱与土壤表层水分含量进行观测，探讨了通过土壤反射率与微分光谱对土壤表层水分的反演方法。4种类型的土壤光谱数据(反射率(R)，反射率倒数的对数(log(1／R))，反射率的一阶微分光谱(dR／dλ)，反射率倒数的对数的一阶微分光谱(d(log(1／R))／dλ))与土壤表层水分之间的关系在本文中得到分析，R与log(1／R)对于不同土壤类型与土壤表层水分都很敏感，说明通过R与log(1／R)反演土壤表层水分受土壤类型的影响很大，而dR／dλ，d(log(1／R))／dλ)对土壤类型却不敏感，对土壤表层水分较为敏感，说明dR／dλ和d(log(1／R))／dλ)对于反演不同类型土壤具有很大的潜力，微分光谱与土壤水分在某些波段具有显著的相关性。通过随机对9种土壤(各具有4个土壤水分)的数据建立反演土壤水分的模型，并其他9种土壤(各具有4个土壤水分)的数据进行验证模型，结果表明，dR／dλ和d(log(1／R))／dλ)能够显著提高R与log(1／R)对于不同土壤类型土壤表层水分的反演精度，由于吸收过程是非线性的，在四种类型的土壤光谱数据中，总体来说，d(log(1／R))／dλ)具有最好的能力预测不同类型土壤的表层水分含量。