Quartz deformation mechanisms during Barrovian metamorphism: Implications from crystallographic orientation of different generations of quartz in pelites

The behaviour of quartz during metamorphism is studied based on two case studies from the Barrovian terrains of Sulitjelma in arctic Scandinavia and Loch Tay in the Central Highlands Dalradian of Scotland. Both terrains preserve evidence for metamorphism in pelites involving nucleation and growth of garnet at different times in the deformation history. Data are presented on the size, shape and crystallographic orientation of quartz preserved as inclusions in garnet and as grains in the surrounding matrix. While quartz-grains remain small and dispersed between mica grains, deformation appears to be dominated by grain-boundary sliding accommodated by dissolution–precipitation. At amphibolite facies, textural coarsening occurs by dissolution of small quartz grains and growth of larger quartz grains, coupled with segregation of quartz from mica. As a result, quartz deforms by dislocation creep, developing crystallographic preferred orientations (CPO) consistent with both coaxial and non-coaxial strain. Quartz CPOs with <0001> axes lying parallel to foliation and stretching direction are commonly developed, and best explained by mechanical rotation of inequant (detrital?) quartz grains. There is no evidence for selective entrapment of quartz inclusions in garnet on the basis of quartz crystallographic orientation.     

探地雷达数据可视化方法

采用文件映射降低大数据量探地雷达(GPR)数据显示对计算机内存的需求,同时使GPR数据可以当作一维数组进行数据处理,方便对数据的随机、实时访问;应用直接写位图、视区分割的成图方案,实现对GPR数据的实时显示;通过位图调色板实现GPR数据调色板,灵活应用该技术可使本来需要对原始数据进行大量运算的算法通过调整调色板实现,提高了GPR数据处理的速度。     

中国深空测控网建立方案的研究

概述了深空测控网的基本技术要求,总结了我国卫星测控网和国内现有射电观测设施的技术、组成和分布,分析和论述了将我国现有的测控设施建设成深空测控网的具体方案。     

青藏公路路基变形分析

为研究青藏公路多年冻土人为上限在退化过程中对路基变形产生的影响过程和程度, 在唐古拉山以南选择了3处具有代表性的路面进行了为期2 a的路面变形观测. 资料表明, 在多年冻土人为上限退化过程中随着公路路基结构、冻土类型的不同, 路基变形从冻胀和融沉过程、冻胀量和融沉量、发生的时间都有很大的不同. 在高含冰量多年冻土区采用半挖半填结构产生的路基变形最为剧烈, 在含冰量相对少且采用较高路堤结构的地段路基变形过程相对平缓. 同时结合探地雷达的勘察结果对路基下的融化区、多年冻土区的内部结构进行了分析. 结果显示,多年冻土人为上限的下移、地下冰的融化会在多年冻土人为上限以上的地质体中导致较强烈的层间错动和扰动.     

成像雷达干涉测量数据相关性与干旱-半干旱地区地表类型特征的关系

利用欧洲资源卫星1号和2号获取的重轨干涉测量雷达数据，首先进行干涉测量数据相关性估测，并结合干涉测量数据的振幅信息，开展新疆喀什试验区地表土地类型的识别与分类，区分和识别出裸土、盐碱地、灌丛、裸岩/戈壁、沼泽和水体 6类土地类型。最后通过对不同土地类型的后向散射特性和相关性的分析，探讨了干涉测量数据相关性与干旱-半干旱地区地表特征的关系。     

探地雷达检测道路厚度结构的应用现状及进展

对探地雷达检测道路厚度结构的应用现状进行介绍,分析雷达检测道路厚度结构的物理前提.将探地雷达的道路厚度检测技术与常规的钻孔取芯方法进行对比,并根据笔者在工作中应用的实际情况,说明探地雷达在公路厚度结构检测方面有广阔应用前景.     

探地雷达检测中如何计算速度

雷达波的传播速度随介质而变,这给准确定位探测目标带来了一些困难,因为目标深度取决于速度与讯号反射时间的乘积.但另一方面,利用速度变化与介质的关系,反过来可以推断介质的物质架构.作者结合实用例举了7种求速度的方法,以供使用探地雷达的同行们选用.     

TRMM PR雷达与阜阳雷达降水资料的对比研究

选取了1998年与1999年HUBEX观测资料，将TRMM卫星上的星载降雨雷达PR与阜阳的713数字化天气雷达资料在以下3个方面做了比较：(1)强度场的分布；(2)平均反射率廓线；(3)灵敏度。分析、比较结果可知阜阳雷达在探测灵敏度和水平方向的分辨率要高于PR，但由于波束宽度、衰减和资料转化过程计算误差的原因，其远距离处的观测值与真实值有一定偏差。PR波长短，对衰减敏感，尤其是在垂直方向上经过强衰减后，订正值仍偏小。但由于探测方式的不同PR在水平方向上不存在衰减的问题，且其资料分布均匀，因此提出一种用PR资料来订正地基雷达资料的方法用以提高地基雷达探测的精确度。     

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.