基于荧光原理的叶绿素a传感器校准方法研究

利用传感器对水体叶绿素a 浓度进行原位测量是获取实时、连续、长时间序列数据的重要手段。本文在对RBR 传感器和ECO（Environmental Characterization Optics）传感器进行原理分析和线性度、稳定性、重复性等基本性能测试的基础上，利用单一藻种培养液和2020年南海北部海域现场数据校准传感器，并对新的传感器校准系数进行验证。结果表明：两台传感器使用新系数比原出厂系数的叶绿素a 浓度测量准确度有明显提高。RBR 传感器现场数据校准系数的计算结果与叶绿素a 标准值误差最小，平均绝对误差从1.93 μg/L 减小到0.35 μg/L，平均相对误差从55.1%减小到10.9%；ECO 传感器藻液系数明显优于出厂系数和现场数据校准系数的计算结果，平均绝对误差从1.76 μg/L 减小到0.59 μg/L，平均相对误差从50.3%减小到15.1%。传感器测量准确度的提高，可为海洋环境监测、海洋生态灾害预警等工作获取真实可靠数据提供支撑。     

南沙群岛珊瑚礁地貌图像信息管理系统

运用面向对象的软件开发技术,结合珊瑚礁地貌学、计算机图像学和计算机信息管理技术,在Windows平台上研制开发出南沙群岛珊瑚礁地貌图像信息管理系统。该系统集文件管理、数据库管理和图形、图像管理于一体,具有信息检索输出、信息编辑和信息维护等功能,以图形用户介面交互,达到"所见即所得"的效果。     

Monitoring the Kuroshio Extension with Dynamically Constrained Synthesis of the Acoustic Tomography, Satellite Altimeter and in situ Data

A finite-difference quasigeostrophic (QG) model of an open ocean region has been employed to produce a dynamically constrained synthesis of acoustic tomography and satellite altimetry data with in situ observations. The assimilation algorithm is based upon the 4D variational data interpolation scheme controlled by the model's initial and boundary conditions. The data sets analyzed include direct and differential travel times measured at the array of five acoustic transceivers deployed by JAMSTEC in the region of the Kuroshio Extension in 1997, Topex/Poseidon altimetry, CTD soundings, and ADCP velocity profiles. The region monitored is located within the area 27.5°–36.5°N, 143°–155°. The results of assimilation show that mesoscale variability can be effectively reconstructed by five transceivers measuring direct and reciprocal travel times supported by relatively sparse in situ measurements. The misfits between model and data lie within the observational error bars for all the data types used in assimilation. We have compared the results of assimilation with the statistical inversion of travel time data and analyzed energy balances of the optimized model solution. Energy exchange between the depth-averaged and shear components of the observed currents reveals a weak decay of the barotropic mode at the rate of 0.2 ± 0.7⋅10⁻⁵ cm²/s³ due to topographic interaction. Mean currents in the region are unstable with an estimate of the available potential energy flux from the mean current to the eddies of 4.7 ± 2.3⋅10⁻⁵ cm²/s³. Kinetic energy transition has the same sign and is estimated as 2.8 ± 2.5⋅10⁻⁵ cm²/s³. Potential enstrophy is transferred to the mesoscale at a rate of 5.5 ± 2.7⋅10⁻¹⁸ s⁻³. These figures provide observational evidence of the properties of free geostrophic turbulence which were predicted by theory and observed in numerical experiments. This revised version was published online in July 2006 with corrections to the Cover Date.     

Hammerstein型非线性积分方程解的存在性

该文采用化为积分方程组的方法 ,利用锥上不动点指数计算 ,在不要求非线性项 f (x,u)非负的情况下 ,证明 Hammerstein型非线性积分方程 φ(x) =∫Gκ(x,y) f (y,φ(y) ) dy非平凡解和多解存在性的一些新的结果。此结果可用来证明非线性常微分方程两点边值问题解的存在性。     

诊断台风异常路径的三层权重控制点方案

本方案采用850、700、500hPa三个层次的环境平均流场作控制点法。综合考虑这些层次上的引导气流在不同时、空域中的相对重要性。试验结果表明,其效果比单一取某层作引导为佳。且对用来预测台风的未来24小时路径是否异常具有一定的参考价值。     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

悬浮沙激光散斑图像处理的研究

本文以统计模式识别为基础，阐述了图像处理在悬浮沙粒粒径流量中的实际应用，提出了用图像层析来确定放大系数的方法，提出了测量的准确度。     

中国海区区域地质编图中重磁图的编制方法

本文简要介绍了局控项目《中国海区１∶５０万区域地质编图（大连幅）》重力异常图、磁力异常图的编制过程，给出了一种以计算机为手段、实现编图自动化的新方法，并分析了该方法与以往编图方法的不同和优点，以国际分幅在中国海区开展区域地质编图尚属首次，在既无海区地质调查规范，又无海区地质调查编图规范的情况下，这一工作无异具有开创性。从理论上系统总结出一套切实可行的编图方法，对于编制中国海区区域地质调查编图规范以     

走航测深数据的自动采集

本文介绍应用IBM微机实现走航实时水深及定位数据的自动采集系统。给出了联机系统方框图及采集、传送数据的程序流程图。并对IBM-PC/XT微机与测深仪之间的接口、数码转换和数据处理作了简要的叙述。