2003-2017年北京市地表热力景观时空分异特征及演变规律

利用2003-2017年MODIS地表温度数据,分别从数量、形状和结构角度揭示北京市不同季相和昼夜间地表热力景观时空分异特征,并进一步通过热力等级变化图谱及质心迁移轨迹揭示城市热力景观空间演变规律,探究热力景观等级转换生态过程。结论如下：① 城市地表热力景观季节和昼夜空间特征差异显著;② 中温区在城市热环境中占主导地位。白天中温区是最不稳定的热力景观等级;夜间次低温区和次高温区不稳定性增加;③ 地表热力景观等级变化以稳定型占主,反复变化型和前期变化型次之。地表热力景观等级通常呈现逐级递增或递减规律,山区呈现逐级降温趋势,北部城郊—山地交错地带表现出次低温和中温的反复转向,南部地区有一定的升温趋势;④ 2003-2017年高温区面积增大且质心向城市中心集中,低温区质心向城市外围扩散。生态涵养发展区对北京市地表热力景观质心迁移贡献率最高。热力景观时空分异特征及演变规律可为有效缓解城市热岛效应提供管理决策支持。     

地月系L_2点中继星激光测距成功率的估算

为了模拟位于地月系L2点的中继星"鹊桥"与月球的位置关系,进而估算中继星激光测距的成功率,按照轨道周期约为14天的要求对中继星所在的晕轨道进行计算,建立了一个综合考虑望远镜抖动、大气抖动和预报轨道横向偏离的模型。从数值上给出了一条轨道周期为14. 78天,X方向(地月连线方向)振幅为12 493 km,Y方向为34 596 km,Z方向(垂直于地月轨道平面方向)为11 916 km的周期轨道。由于晕轨道的最小振幅远大于月球遮挡的临界振幅4 000 km,因此月球对中继星不存在遮挡问题。基于建立的测距成功率模型,根据昆明站(国际编号:7820)的激光测距系统对运行在该轨道上的中继星进行测距成功率分析,结果表明:测距成功率随着中继星横向轨道标准差的增大呈快速降低的趋势。对于中继星到测站的平均距离而言,当中继星没有横向偏离时,探测器产生的光电子数为0. 151,成功率为14. 07%;横向偏离2 km时,光电子数降为0. 035,成功率降为3. 46%。对比最近距离与最远距离的情况,无横向偏离的情况下,探测器产生的光电子数从0. 174降为0. 139,成功率从16. 01%降为13. 02%。该计算结果可为云南天文台1. 2 m望远镜实现中继星激光测距提供参考。     

Detecting arbitrarily shaped clusters in origin-destination flows using ant colony optimization

An origin-destination (OD) flow can be defined as the movement of objects between two locations. These movements must be determined for a range of purposes, and strong interactions can be visually represented via clustering of OD flows. Identification of such clusters may be useful in urban planning, traffic planning and logistics management research. However, few methods can identify arbitrarily shaped flow clusters. Here, we present a spatial scan statistical approach based on ant colony optimization (ACO) for detecting arbitrarily shaped clusters of OD flows (AntScan_flow). In this study, an OD flow cluster is defined as a regional pair with significant log likelihood ratio (LLR), and the ACO is employed to detect the clusters with maximum LLRs in the search space. Simulation experiments based on AntScan_flow and SaTScan_flow show that AntScan_flow yields better performance based on accuracy but requires a large computational demand. Finally, a case study of the morning commuting flows of Beijing residents was conducted. The AntScan_flow results show that the regions associated with moderate- and long-distance commuting OD flow clusters are highly consistent with subway lines and highways in the city. Additionally, the regions of short-distance commuting OD flow clusters are more likely to exhibit ‘residential-area to work-area’ patterns.     

Improving the prediction of extreme FPSO hawser tension,using another highly correlated hawser tension with a longer time record

The floating production storage and offloading unit (FPSO) is an offshore vessel that produces and stores crude oil prior to tanker transport. Robust prediction of extreme hawser tensions during the FPSO offloading operation is an important safety concern. Excessive hawser tension may occur during certain sea conditions, posing an operational risk. In this paper, the finite element method (FEM) software ANSYS AQWA has been employed to analyze vessel response due to hydrodynamic wave loads, acting on a specific FPSO vessel under actual sea conditions.In some practical situations, it would be useful to improve the accuracy of some statistical predictions based on a certain stochastic random process, given another synchronous highly correlated stochastic process that has been measured for a longer time, than the process of interest. In this paper, the issue of improving extreme value prediction has been addressed. In other words, an efficient transfer of information is necessary between two synchronous, highly correlated stochastic processes. Two such highly correlated FPSO hawser tension processes were simulated in order to test the efficiency of the proposed technique.     

Analysis of the extreme wave elevation due to second-order diffraction around a vertical cylinder

Statistical analysis of nonlinear random waves is important in coastal and ocean engineering. One approach for modeling nonlinear waves is second-order random wave theory, which involves sum- and difference-frequency interactions between wave components. The probability distribution of the non-Gaussian surface elevation can be solved using a technique developed by Kac and Siegert [21]. The wave field can be significantly modified by wave diffraction due to a structure, and the nonlinear diffracted wave elevation can be of interest in certain applications, such as the airgap prediction for an offshore structure. This paper investigates the wave statistics due to second-order diffraction, motivated by the scarcity of prior research. The crossing rate approach is used to evaluate the extreme wave elevation over a specified duration. The application is a bottom-supported cylindrical structure, for which semi-analytical solutions for the second-order transfer functions are available. A new efficient statistical method is developed to allow the distribution of the diffracted wave elevation to be obtained exactly, accounting for the statistical dependency between the linear, sum-frequency and difference-frequency components. Moreover, refinements are proposed to improve the efficiency for computing the free surface integral. The case study yields insights into the problem. In particular, the second-order nonlinearity is found to significantly amplify the extreme wave elevation, especially in the upstream region; conversely, the extreme elevation at an oblique location downstream is attenuated due to sheltering effects. The statistical dependency between the linear and sum-frequency components is also shown to be important for the extreme wave statistics.     

A stochastic method for the prediction of icebreaker bow extreme stresses

It is well established that the ship-ice interaction process is quite complex and associated ice loads on the icebreaker hull is a stochastic process. Obviously, novel accurate statistical methods and models should be developed and applied to estimate extreme bow stresses.This paper studies icebreaker bow stresses based on measured distribution of ice thickness in the Arctic Ocean on the way to and from the North Pole. Since the vessel route was carefully selected searching for easier ice conditions, the Arctic Ocean crossing was not a straight linear but a meandering path. Thus, the specific ship route data was biased with respect to general ice statistics in the region, but true with respect to the route specific ice data encountered by a ship navigating in that region. Therefore the route specific ice thickness data is directly needed for ship design and navigation analysis. It is assumed that captains are competent and knowledgeable, and therefore will select a route that provides the most favourable ice conditions.This paper contributes to study of the newest Chinese self-designed polar icebreaker, serving the purpose of enhancing icebreaker operational reliability. Finite Element Method software package ANSYS/LS-DYNA has been employed to simulate bow stress pattern for a particular icebreaker operating in the Arctic Ocean. Extreme bow stresses were estimated using Naess-Gaidai method. The latter is a first application of Naess-Gaidai method to a distribution with lower bound. Thus this paper aims at introducing an efficient method of estimating route-specific icebreaker extreme bow stresses.     

高质量增长背景下海洋经济发展的时空协调模式研究——基于环渤海地区地级市的实证

海洋经济协调发展是科学评价区域海洋经济发展质量的重要依据。遵循城市与海洋经济协同的发展理念,构建环渤海城市海洋经济发展时空协调度评价体系,运用复杂系统时空协调度评价模型,计算并分析2008~2016年环渤海城市海洋经济发展时空协调度,通过SaTScan软件分析其时空聚类区。研究结果显示：①海洋经济各系统发展水平中,社会系统呈大幅度分散上升趋势,经济系统、生态系统与综合系统呈小幅度集中与分散交替上升趋势;协调等级时序变化稳定型城市主要是大连、潍坊、青岛、烟台、威海。②协调度时空聚类区既有空间分异又有重叠交集,社会系统、综合系统、经济系统聚类区依次相互覆盖,生态系统与其它三系统既有重叠区也有独立区。③聚类区内部,社会系统最为稳定,综合系统、经济系统次之,生态系统最为薄弱。     

海上风电升压站平台高程确定标准的合理性研究

为保证海上风电升压电站建设的经济合理与安全可靠,合理确定海上风电升压电站平台高程十分必要。文中从波浪与潮位的遭遇组合、最大波高取值与现行相关标准的比较、最大波峰高度计算的合理性等方面,全面分析了确定海上风电升压站平台高程各组成项取值标准的合理性,研究认为现行标准明显偏高。建议海上升压站平台底部高程按"100年一遇极端高水位+重现期50年波列累积频率1%的最大波峰高度+安全超高"确定。结合工程实例计算分析,按本文建议可使海上升压站平台高程明显降低,从而节省工程造价,还可减轻升压站工程对周边风机的遮蔽影响,以达到多发电量的效果。     

黄东海海区总悬浮物散射特性研究

我国黄东海水体散射特性非常复杂,这是造成该海域水色区划特点显著的原因之一。文中利用2003年4月黄东海试验数据(HD200304)对总悬浮物(TSM,Total Suspended Matter)的后向散射概率~bbs和单位散射系数bs*进行研究。基于对现场数据的统计分析,我们开发了总悬浮物后向散射概率模型,通过相对偏差分析表明,有近90%的样品反演相对偏差控制在±30%之内。对总悬浮物单位散射系数研究时,选择555 nm为参考波段,开发了不同波段间总悬浮物单位散射系数关系模型,通过相对偏差分析表明,有近94%的样品反演相对偏差在±10%之内,反演效果非常好。     

动态矿区DEM生成方法及其在土地复垦中的应用研究

首先根据我国矿区土地复垦工作中存在的不足,通过研究提出"动态土地复垦"的概念,并确定了动态土地复垦方案制定的数据基础——动态矿区数字高程模型。动态矿区数字高程模型应该包含煤矿生产对地表的累积影响结果数据和地表的原始地形信息,开采沉陷预计结果可以提供前者,地面测量可以提供后者,经过数据处理可以按时间间隔生成描述塌陷区的一系列数字高程模型(DEM)(准动态),然后运用DEM的空间分析技术提取塌陷区在不同时间段的土地破坏类型、范围和位置数据,并根据这些数据进行动态土地复垦方案决策数据的提取,经实例验证该方法可行。