Smeared crack approach: back to the original track

This paper briefly reviews the formulations used over the last 40 years for the solution of problems involving tensile cracking, with both the discrete and the smeared crack approaches. The paper focuses on the smeared approach, identifying as its main drawbacks the observed mesh‐size and mesh‐bias spurious dependence when the method is applied ‘straightly’. A simple isotropic local damage constitutive model is considered, and the (exponential) softening modulus is regularized according to the material fracture energy and the element size. The continuum and discrete mechanical problems corresponding to both the weak discontinuity (smeared cracks) and the strong discontinuity (discrete cracks) approaches are analysed and the question of propagation of the strain localization band (crack) is identified as the main difficulty to be overcome in the numerical procedure. A tracking technique is used to ensure stability of the solution, attaining the necessary convergence properties of the corresponding discrete finite element formulation. Numerical examples show that the formulation derived is stable and remarkably robust. As a consequence, the results obtained do not suffer from spurious mesh‐size or mesh‐bias dependence, comparing very favourably with those obtained with other fracture and continuum mechanics approaches. Copyright © 2006 John Wiley & Sons, Ltd.     

昆仑山8.1级地震前中国大陆的构造应变背景

利用“网络工程”1998～2001年累积的1181个测站的GPS重复观测资料，采用双三次样条函数模型建立中国大陆水平运动模型速度场，用大地坐标在椭球面上计算各类应变场，详细分析了2001年昆仑山8．1级地震前中国大陆水平构造应变场空间分布特征。各类构造应变场的最高值都出现在喜马拉雅构造带与昆仑山地块内(地震断裂带南侧)，鲜水河—安宁河断裂带次之。分析表明，昆仑山8．1级地震正好发生在张性面膨胀应变率的高值区，第一、第二和最大剪应变率高值区边缘的突变区和最大、最小主应变率的高值区。     

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd     

地震前后垂直形变场动态演化的量化指标

提出一种表达垂直形变场动态演化过程的量化指标——区域应变率、应变集中度。在此基础上，对南北地震带各水准监测区近30年的垂直形变资料进行了实际计算．并结合具体震例进行了对比研究。结果表明：量化指标在一定程度上能够反映地震前后形变场的动态演化过程和地壳运动状态，对地震的中长期预报有一定的积极意义。     

江汉盆地钻孔测井资料确定地应力最大水平主压应力方向

利用钻孔测井资料并运用地层倾角测量信息分析法，给出了江汉盆地地应力最大水平主压应力方向为ＮＥ６０～６５°     

行星磁场与卫星引力及其相对运动的统计关系

从知道某些天体具有磁场起，人们就对其磁场的起源提出种种解释，例如有电池说，转子说，化石说，发电机说等等。但由于这些学说都分别与某些观测事实相抵触而未被公认，因此星球磁场的起源一直是未能解决的命题。余先河先生提出，星球的磁场起源可能与所受的引力有关，行星的磁场强度正比于其所受卫星的引力；正比于卫星与行星的引力连线转动的相对角速度。本文对这两方面的命题分别进行了相关分析，得到其相关系数分别为：ｒ＝０．８４８１和ｒ＝０．８４２５，它们都在ａ＝０．０１的信度水平上相关。结果表明余新河关于行星磁场起源的设想是有基础的。本文还对其统计结果和可能机制进行了讨论。     

洛坝铅锌矿床的构造演化分析

洛坝铅锌矿床位于黄诸关韧脆性变形带所波及的范围内,断裂、褶皱、劈理、节理等形态构造类型均很发育,经对小型构造的统计及应力场分析证明,矿区变形主要是在海西—印支期长期存在的南北向古应力场持续作用下形成的。     

台湾海峡西岸重力场变化梯度场图像分析

讨论了应用曲面拟合技术和利用离散的重力观测点的重力变化对特定研究区的重力场变化进行数值模拟以获取该区重力变化空间梯度场图像的具体方法;并应用该方法获得了2004年3月福建安溪3.6级地震前的重力变化空间梯度场图像,发现空间梯度场图像能清晰地反映出地震前重力场群体性变化的差异性;利用此方法对2005年6月~2006年3月间台湾海峡西岸重力场变化进行数值模拟,获得其空间梯度场图像。     

我国个人所得税制度完善的法律思考

个人所得税是与每个人联系都很紧密的税种,它的完善与否,直接体现了我国法制建设的完善程度及居民素质的高低。但现行税制由于内外原因,存在各种缺陷。因此有必要在理论中找到对策,并在实践中寻求答案逐步完善个人所得税制度。     

板翅式换热器综合性能优化的设计方法

应用给定换热器结构材料而使换热量最大的两侧换热表面的最佳匹配准则和使可用能损失率最小的最佳运行参数准则。利用两个准则间的关系 ,采用迭代的方式完成换热器的优化设计 ,使换热器的设计达到材料省、换热效果好及运行费用低的目的 ,且能在设计阶段实现。