导航卫星自主定轨的算法研究及模拟结果

讨论了利用卫星-卫星间的距离观测值建立导航卫星系统自主定轨的数学方法，并用GPS星座模拟星间观测值，采用滤波算法计算卫星的状态参数。模拟结果表明，在空间测距精度一定的情况下，自主定轨精度能高于GPS广播星历，因而能较精确地维持卫星系统的坐标框架。     

Stability and accuracy analysis of the central difference method for real‐time substructure testing

The central difference method (CDM) that is explicit for pseudo‐dynamic testing is also believed to be explicit for real‐time substructure testing (RST). However, to obtain the correct velocity dependent restoring force of the physical substructure being tested, the target velocity is required to be calculated as well as the displacement. The standard CDM provides only explicit target displacement but not explicit target velocity. This paper investigates the required modification of the standard central difference method when applied to RST and analyzes the stability and accuracy of the modified CDM for RST. Copyright © 2005 John Wiley & Sons, Ltd.     

Incorporating Spatial Dependence in Predictive Vegetation Models: Residual Interpolation Methods*

Predictive vegetation modeling can be used statistically to relate the distribution of vegetation across a landscape as a function of important environmental variables. Often these models are developed without considering the spatial pattern that is inherent in biogeographical data, resulting from either biotic processes or missing or misspecified environmental variables. Including spatial dependence explicitly in a predictive model can be an efficient way to improve model accuracy with the available data. In this study, model residuals were interpolated and added to model predictions, and the resulting prediction accuracies were assessed. Adding kriged residuals improved model accuracy more often than adding simulated residuals, although some alliances showed no improvement or worse accuracy when residuals were added. In general, the prediction accuracies that were not increased by adding kriged residuals were either rare in the sample or had high nonspatial model accuracy. Regression interpolation methods can be an important addition to current tools used in predictive vegetation models as they allow observations that are predicted well by environmental variables to be left alone, while adjusting over‐ and underpredicted observations based on local factors.     

Correcting the Smoothing Effect of Ordinary Kriging Estimates

The smoothing effect of ordinary kriging is a well-known dangerous effect associated with this estimation technique. Consequently kriging estimates do not reproduce both histogram and semivariogram model of sample data. A four-step procedure for correcting the smoothing effect of ordinary kriging estimates is shown to be efficient for the reproduction of histogram and semivariogram without loss of local accuracy. Furthermore, this procedure provides a unique map sharing both local and global accuracies. Ordinary kriging with a proper correction for smoothing effect can be revitalized as a reliable estimation method that allows a better use of the available information.     

Snow model sensitivity analysis to understand spatial and temporal snow dynamics in a high‐elevation catchment

In this paper, we addressed a sensitivity analysis of the snow module of the GEOtop2.0 model at point and catchment scale in a small high‐elevation catchment in the Eastern Italian Alps (catchment size: 61 km²). Simulated snow depth and snow water equivalent at the point scale were compared with measured data at four locations from 2009 to 2013. At the catchment scale, simulated snow‐covered area (SCA) was compared with binary snow cover maps derived from moderate‐resolution imaging spectroradiometer (MODIS) and Landsat satellite imagery. Sensitivity analyses were used to assess the effect of different model parameterizations on model performance at both scales and the effect of different thresholds of simulated snow depth on the agreement with MODIS data. Our results at point scale indicated that modifying only the “snow correction factor” resulted in substantial improvements of the snow model and effectively compensated inaccurate winter precipitation by enhancing snow accumulation. SCA inaccuracies at catchment scale during accumulation and melt period were affected little by different snow depth thresholds when using calibrated winter precipitation from point scale. However, inaccuracies were strongly controlled by topographic characteristics and model parameterizations driving snow albedo (“snow ageing coefficient” and “extinction of snow albedo”) during accumulation and melt period. Although highest accuracies (overall accuracy = 1 in 86% of the catchment area) were observed during winter, lower accuracies (overall accuracy < 0.7) occurred during the early accumulation and melt period (in 29% and 23%, respectively), mostly present in areas with grassland and forest, slopes of 20–40°, areas exposed NW or areas with a topographic roughness index of ?0.25 to 0 m. These findings may give recommendations for defining more effective model parameterization strategies and guide future work, in which simulated and MODIS SCA may be combined to generate improved products for SCA monitoring in Alpine catchments.     

基于决策树分类的大屯矿区地物信息提取及矿区污染分析

本文在对国内外遥感图像分类方法充分研究分析的基础上,选择决策树分类法对大屯矿区的Landsat 8遥感图像进行分类研究。选取样本提取并分析研究区典型地类光谱特征曲线,依据光谱曲线特征和归一化植被指数建立了土地利用分类决策树模型,通过反复试验和修正,筛选出适宜大屯矿区地物分类的决策树最优阈值,对研究区进行分类和精度评价,最后通过分类结果对研究区的水体污染状况进行简要分析。     

单片卫星影像在航测测图中的利用

在边境测图过程中,经常遇到较大面积云层问题,使航测测图无法顺利进行。能充分利用的影像资源是第一次全国地理国情普查的影像,有国产高分2号、SPOT-6、资源3号等单片卫星影像,无立体像对影像。通过对国情普查的影像分析选取,选取一试验区域进行试验,用国产高分2号卫星影像与SPOT-6卫星影像组成立体像对测制地物地貌,用Worldview卫星立体像对影像测制同一区域的地物地貌,将两种影像源组成立体模型测制的地物地貌进行比较及精度统计,说明单片卫星影像在航测测图中达到的精度。     

灰色组合模型在滑坡变形监测中的应用分析

在GM(1,1)模型的基础上,主要研究了改进残差修正模型、灰色BP神经网络模型、灰色线性回归模型在变形数据的预计精度,并且结合实例分析了不同灰色组合模型在滑坡变形预计的精度以及优缺点。     

国产机载LiDAR系统安置角误差检校方案研究

机载激光扫描仪(Light Detection And Ranging,LiDAR)系统是由多个子系统集成,其中,安置角误差是集成误差中最大的误差源,安置角误差检校的方法多种多样,高效率、高精度的检校方式还需要试验的支撑。本文对平差模型法和几何模型法进行了试验分析,试验结果很好地证明了不同方法的优越性,为机载LiDAR系统的安置角检校提供了参考。     

基于线要素动态化简的匹配算法比较与评价

矢量线要素数据来源多样,细节层次不一,限制了已有匹配算法正确率的提高,同时也给算法评价带来困难。化简可以减少线要素细节层次,提取其主要形态,据此提出一种基于线要素动态化简的匹配算法评价新方法。对不同匹配算法采用相同数据,在相同化简算法支撑下进行匹配,从而实现对不同匹配算法的评价。首先,阐述动态化简方法提取线要素主要形态的过程;其次,利用动态化简分别辅助4种已有匹配算法,获取每个匹配算法的最优匹配正确率;最后,将4种匹配算法的原始匹配结果与加入动态化简后的匹配结果进行对比,分析化简对匹配结果的影响,并把该影响运用到匹配算法的比较和评价中来。其中,1通过匹配正确率变化、误匹配等分析了匹配算法的数据适用性;2通过化简比例系数K变化时新增匹配数量的统计,评价了匹配算法对线要素局部细节的敏感程度并提出该指标的量化方法;3结合匹配算法采用的匹配相似度指标对其作出评价。