全站仪似水准法和对向法高程测量的比较研究

通过对似水准法和对向法高程测量原理、误差来源及精度的比较分析,我们发现随着距离和竖直角度的增大,对向法高程测量中误差的变化大于似水准法高程测量中误差的变化;当两观测点间的水平距离小于等于1km时,对向法高程测量精度一般高于似水准法高程测量精度,但是当两观测点间的水平距离大于1km时,似水准法高程测量精度一般高于对向法高程测量精度。     

基于GIS的区域经济统计分析系统的设计与实现

随着经济的发展,区域间经济相互作用和影响的关系越来越密切,忽略空间相互作用的传统区域经济分析手段和方法开始显现出一些明显的不足。而GIS在处理和分析区域地理数据上具有强大的空间分析能力,为此我们引入GIS工具对区域经济进行分析,相较于传统的分析手法有了很大改善。本文以江西省区域经济数据为例,设计了一个基于GIS的区域经济统计分析系统,并利用Arcob-jects二次开发控件结合VB可视化编程语言,实现了大部分区域经济统计分析功能,最后并将结果进行网络发布。研究结果表明将GIS引入到区域经济统计分析中,更能正确、有效的揭示区域经济发展在空间上的联系,为区域经济研究决策提供服务。     

基于小波变换的单频GPS快速精密定位整周模糊度的解算

对于GPS短基线,载波相位双差观测量已基本消除了卫星轨道误差、钟差、大气折射误差等系统偏差的影响,主要包含距离观测量信息及随机测量误差,其中测量误差是高频的测量噪声,小波变换可将GPS载波相位双差观测量中的观测噪声(高频部分)分解出来。本文利用Coiflets小波基函数对GPS快速定位的原始载波相位双差观测量进行5层分解,通过重构第5层低频系数获得去除噪声的"干净"的载波相位双差观测量,然后利用"干净"的双差观测量进行最小二乘参数估计,以减小测量噪声对GPS快速定位病态方程解的扰动。计算结果表明该方法能够显著提高GPS快速定位中模糊度浮点解的精度,仅利用几个观测历元的数据就可以准确地固定模糊度。     

Approaches for comparative evaluation of raster GIS-based landslide susceptibility zonation maps

Evaluation of maps generated from different conceptual models or data processing approaches at spatial level has importance in many geoenvironmental applications. This paper addresses the spatial comparison of different landslide susceptibility zonation (LSZ) raster maps of the same area derived from various procedures.     

基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

From 2D TO 3D Through Modelling Based On A Single Image

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.     

A framework of region-based spatial relations for non-overlapping features and its application in object based image analysis

Object based image analysis (OBIA) is an approach increasingly used in classifying high spatial resolution remote sensing images. Object based image classifiers first segment an image into objects (or image segments), and then classify these objects based on their attributes and spatial relations. Numerous algorithms exist for the first step of the OBIA process, i.e. image segmentation. However, less research has been conducted on the object classification part of OBIA, in particular the spatial relations between objects that are commonly used to construct rules for classifying image objects and refining classification results. In this paper, we establish a context where objects are areal (not points or lines) and non-overlapping (we call this “single-valued” space), and propose a framework of binary spatial relations between segmented objects to aid in object classification. In this framework, scale-dependent “line-like objects” and “point-like objects” are identified from areal objects based on their shapes. Generally, disjoint and meet are the only two possible topological relations between two non-overlapping areal objects. However, a number of quasi- topological relations can be defined when the shapes of the objects involved are considered. Some of these relations are fuzzy and thus quantitatively defined. In addition, we define the concepts of line-like objects (e.g. roads) and point-like objects (e.g. wells), and develop the relations between two line-like objects or two point-like objects. For completeness, cardinal direction relations and distance relations are also introduced in the proposed context. Finally, we implement the framework to extract roads and moving vehicles from an aerial photo. The promising results suggest that our methods can be a valuable tool in defining rules for object based image analysis.     

三峡水库区兴山后坝滑坡成因分析

文章通过对三峡水库区兴山后坝滑坡的地质、结构及变形特征研究以及稳定性分析,阐明了该滑坡成因和影响因素。研究发现,滑坡活动主要受地形地貌、地层岩性、人类工程活动以及降雨等因素的影响。运用剩余推力法对比分析天然及暴雨条件下不同层位的滑坡稳定性系数,得出在暴雨作用下滑坡表层滑带稳定性系数最小,不同滑带的稳定性受降雨的影响也各不相同,呈表层〉浅层〉深层的规律;这主要受滑带土的粘土矿物组分的影响。     

国土资源数据分析及其整合与集成

本文详细分析了国土资源数据特点、综合数据来源、产生方式和使用方法等方面,对数据进行了分类,比较了不同的数据格式。在此基础上,阐述了国土资源数据的集成框架,讨论了数据整合和集成的方法和流程,提出了数据整合与集成的三种框架问题。     

经验模式分解的尺度阈值滤波在变形分析中的应用

本文将信号处理领域的经验模式分解算法应用于变形信息的提取中,通过引入阈值函数,建立了基于经验模式分解的尺度阈值滤波模型,采用优化模型确定了经验模式分解的次数。分别通过模拟试验和实测数据与小波阈值法和多项式拟合法进行了比对,分析表明:在低噪声情况下,三种方法都有一定的滤波效果;在高噪声情况下,经验模式分解的尺度阈值滤波法具有与小波阈值去噪法相等的精度,而且瞬时强噪声识别能力更好,优于多项式拟合法。