On the radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas

The radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas of finite depth is investigated. The analytical expressions for the radiated and diffracted potentials are derived as infinite series by use of the method of separation of variables. The unknown coefficients in the series are determined by the eigenfunction expansion matching method. The expressions for wave forces, hydrodynamic coefficients and reflection and transmission coefficients are given and verified by the boundary element method. Using the present analytical solution, the hydrodynamic influences of the angle of incidence, the submergence, the width and the thickness of the structure on the wave forces, hydrodynamic coefficients, and reflection and transmission coefficients are discussed in detail.     

Three-dimensional numerical simulation of obfique wave action on vertical walls

A three-dimensional numerical model based on the potential theory was developed to study the oblique wave action on vertical walls. A source term inside the domain was used to generate incident waves and outgoing waves were dissipated by sponge layers and transmitted by radiation boundaries. The finite difference method was used to solve the governing equations and boundary conditions in the regular transformed domain in σ-coordinate. Satisfactory agreements between the numerical predictions and experimental results of wave force were obtained. It is concluded that the maximum wave force acting on the vertical walls is induced by the obliquely incident waves rather than the normally incident waves.     

双层局部开孔板沉箱对波浪反射的理论研究

提出了一种用于研究由双层开孔板和一个不透水后板的开孔结构对斜向波反射率的理论分析方法。整个流域被分成三个子域，在每个子域内应用特征函数展开法以得到该域内包含未知展开系数的势函数的表达式，在速度势的展开中，考虑了非传播模态波浪的影响。通过匹配开孔板处的边界条件可以求解待定的展开系数，继而求解双层开孔板防波堤结构对斜向波的反射率。数值计算结果与试验结果进行了比较，符合较好。并进一步讨论了几个重要因素对反射系数的影响。     

In-line response of a cylinder in oscillatory flow

The most widely used mathematical model to represent flow-induced in-line forces on structures is based on the Morison¹ equation. The present paper investigates the validity of using an extension of Morison's equation for non-stationary structures, by comparing predictions with results from a simple laboratory experiment. An elastically-mounted circular cylinder is placed in the sinusoidal flow of a U-tube, and responds in-line with the flow. Cylinder forces and responses are recorded over a range of Keulegan Carpenter numbers up to 35. An equation of motion is solved simply by using relative coordinates and by employing equivalent linearisation. The linear results are compared over a wide variation of parameters with solutions using the full nonlinear equation. Thereafter experimental results are compared with linear predictions.     

Wave Defending Effects of V-Type Bottom-Mounted Breakwaters

An analytical method is developed for the study of the wave defending effects of the V-type bottom-mounted breakwater. The breakwater is assumed to be rigid, thin, impermeable and vertically located in water of constant depth. The fluid domain is divided into three sub-regions by an imaginary interface. The velocity potential in each region is expanded by eigenfunctions. By satisfying the corresponding boundary conditions and matching conditions in and between sub-regions, a set of hnear algebraic equations can be obtained to determine the unknown coetfficients for the eigenfunction expansions for each sub-region. The accuracy of the present model is verified by a comparison with existing results for the case of an isolated breakwater. Numerical results, in the form of contour maps of the relative wave amplitude around the breakwater, are presented for a range of wave and breakwater parameters. The results show that the V-type bottommounted breakwater is generally effective in defending against waves. In general, the wave height in the protected area is about 20-50 percent of the incident wave height.     

分离入射波与反射波的解析方法

提出了一种新的分离入射波和反射波的解析方法（AM）。利用两点处的 波高信息，运用Hilbert变换得到波浪信号在复域内的解析表达式，不需要计算合成波高和相位差即可实现信号的分离。根据分离结果，可以精确地估计入射波与反射波的幅值以及反射系数等参数，能够获得入射波与反射波之间的相位信息，并且可方便地用于不规则波的分离。文中通过数值模拟与物理模型实验对AM法进行了检验，所得的结果与实际值非常吻合。     

浮体间距对多浮体系统水动力系数的影响

根据三维线性势流理论，采用格林函数法，对多浮体系统的水动力系数进行了数值分析。数值算例中给出了在固定波频下水动力系数与浮体间相对位置关系曲线。水动力系数的变化幅度随着浮体间距离增大而变小。随着浮体间距的变化，水动力系数极值的出现具有明显的规律，相邻的极大值(或极小值)的间距为半个波长或一个波长。     

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.     

湍流数值模拟中封闭模式应用的局限性

通过对琼州海峡的潮流场特征进行数值模拟，指出了选择不同的特征混合长度表达式对数值模拟结果的影响，表明了基于特征混合长度理论的流封闭模式在近海湍流数值模拟中应用的局限性。