弹性波的三维有限元模拟

本文讨论了弹性波瞬态传播问题的三维有限元计算方法及当前存在的实际困难.针对要求计算机内存大和计算时间长的问题,采取了改进措施.由于采用了集中质量矩阵和修正的中心差分时间积分显格式相结合的方法,可以使计算机内存和计算时间大为减少;由于采用结点定位法,最适合用于目前发展的并行计算机系统,可使计算速度大大增快;还采用了有效激发震源法,有效激发区是随时间步进的增加而逐步增大,这不仅能节省计算时间,而且使波场的传播过程一目了然,本文计算了由两种介质组成的三维楔形问题,得到若干典型剖面的瞬时波场图及随时间变化的合成地震图.     

A way to synchronize models with seismic faults for earthquake forecasting: Insights from a simple stochastic model

Numerical models are starting to be used for determining the future behaviour of seismic faults and fault networks. Their final goal would be to forecast future large earthquakes. In order to use them for this task, it is necessary to synchronize each model with the current status of the actual fault or fault network it simulates (just as, for example, meteorologists synchronize their models with the atmosphere by incorporating current atmospheric data in them). However, lithospheric dynamics is largely unobservable: important parameters cannot (or can rarely) be measured in Nature. Earthquakes, though, provide indirect but measurable clues of the stress and strain status in the lithosphere, which should be helpful for the synchronization of the models.The rupture area is one of the measurable parameters of earthquakes. Here we explore how it can be used to at least synchronize fault models between themselves and forecast synthetic earthquakes. Our purpose here is to forecast synthetic earthquakes in a simple but stochastic (random) fault model. By imposing the rupture area of the synthetic earthquakes of this model on other models, the latter become partially synchronized with the first one. We use these partially synchronized models to successfully forecast most of the largest earthquakes generated by the first model. This forecasting strategy outperforms others that only take into account the earthquake series. Our results suggest that probably a good way to synchronize more detailed models with real faults is to force them to reproduce the sequence of previous earthquake ruptures on the faults. This hypothesis could be tested in the future with more detailed models and actual seismic data.     

Flocculation improves uptake of Sr and Cs from radioactive effluents

This paper presents the results of investigation on uptake of radioactive species ⁹⁰Sr and ¹³⁷Cs present in the liquid effluents from nuclear processing plants. Chemical precipitation process is adopted to remove radioactivity from the effluents with low and intermediate level of activity. In this process, radioactive ⁹⁰Sr and ¹³⁷Cs are co-precipitated along with copper ferrocyanide, ferric hydroxide and either calcium phosphate or barium sulphate. These precipitates being fine in size require flocculation for enhanced settling rate in clarifier/thickener. The flocculation by some selected high molecular weight polyacrylamide based polymers has improved the uptake of radioactive metal ions. The adsorption of these radioactive species has been found to increase in the presence of these flocculants thereby improving the decontamination factor (DF). While flocculating the precipitates, there may be some complex formation with Sr²⁺/Cs⁺, flocculant and the substrate. This has enhanced the uptake of the radioactive metal ions from the liquid component. The plant trials have indicated the improvement of DF value due to flocculation by cationic flocculant.     

World-wide synthetic tide parameters for gravity and vertical and horizontal displacements

The response of the Earth’s crust to the direct effect of lunisolar gravitational forcing is known as the body tide. The body tide is superimposed by surface-loading forces due to the pressure of the periodically varying ocean tide acting on the Earth, called ocean tide loading (OTL). Both body tide and OTL can be decomposed into components of the same frequency known as tidal parameters. However, OTL is more complicated than body tides because of the dynamic effects of the ocean. Estimating OTL requires a model of the ocean tides and knowledge of the elastic properties of the solid Earth. Thus, synthetic tide parameters (amplitude factors and phase leads) have been developed here on a world-wide grid for gravity and positional displacements. The body tide contributions were added to the oceanic contribution to provide the Earth tide response. The accuracy and reliability of the synthetic tidal parameters have been estimated by comparing observed gravity and vertical-displacement tide parameters with those interpolated from our synthetic model, which shows good agreement. Tests also indicate that the synthetic tide parameters provide realistic gravimetric and displacements for practical use in tidal prediction.     

地质雷达及浅层地震在泥质粉砂岩中断裂带上的曲线特征

探讨了如何利用地质雷达及浅层地震有关原理判释泥质粉砂岩中隐伏断裂带的性质和特征。主要的工作方法是通过现场实测，分析地质雷达反映在张性断裂带和压性断裂带上的曲线特征，分析浅层地震相遇时距曲线在断裂带上的曲线特征。后者的主要特征有：（1）在断裂带上初至时间延长；（2）在断裂带上左右支时距曲线上下跳动的幅度均等；（3）在断裂带上跳动的长度不一；（4）在断裂带左右支时距曲线上下跳动或反相；（5）时距曲线呈喇叭口。阐明了地质雷达和浅层地震的原理及其在泥质粉砂岩中勘查断裂构造的效果     

雷达遥感在澜沧江中下游地区锰矿调查评价中的应用

澜沧江吓游地区地处热带-亚热带，植被及第四系覆盖严重，应用雷达遥感技术可以初步揭露植覆盖，利用SAR图像识别主要岩石类型和构造形式，并圈定了主要含锰岩系，进而确定了成锰有利地段。     

A hybrid indirect boundary element—discrete wave number method applied to simulate the seismic response of stratified alluvial valleys

A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys.     

“2002.6.30”滇中低涡暴雨的中尺度分析

利用MICAPS常规资料和GMS卫星云图，3830—C多普勒雷达观测资料，对2002年6月30日发生于滇中地区的暴雨天气过程进行诊断和分析，发现暴雨过程由中低层低涡切变造成，暴雨区与垂直速度及涡度所表现的强烈上升区对应，并伴有高能高湿条件；同时卫星云图上有中尺度低涡云团发展。多普勒雷达回波资料分析表明，暴雨过程中出现了明显的中尺度系统，如中尺度辐合线、中尺度气旋、逆风区等，具有典型的对流型特征。     

路用探地雷达的应用技术研究进展

有效、无损、快捷、简便是公路检测技术发展的方向，当前国内外先进的浅层勘探技术——路用探地雷达检测，以其无损、快捷以及浅层高分辨率的优势被迅速应用于公路检测。本文对近年来路用探地雷达技术的发展及应用情况进行了介绍，详细分析了探地雷达的工作原理、系统组成结构。就探地雷达在公路建设、维护过程中的应用情况进行了系统总结。     

A Case Study of Satellite Synthetic Aperture Radar Signatures of Spatially Evolving Atmospheric Convection over the Western Atlantic Ocean

A case study of a particularly intense cold air outbreak over the northAtlantic Ocean extending from the northeast coast of the UnitedStates to the Gulf Stream is described. A RADARSAT satellite synthetic apertureradar (SAR) image of this outbreak dramatically illustrates the spatialevolution of convection. Nearly coincident images from the National Oceanic and Atmospheric Administration's Advanced Very HighResolution Radiometer are used to compare many interesting features.In addition, National Weather Service rawinsonde data, National Data Buoy Center buoy data, and Woods Hole Oceanographic Institute Coastal Mixing and Optics mooring data arepresented. We use these data to help describe the spatial evolution of the atmospheric boundary-layer processes involved in this outbreak.Rows of cellular convective clouds begin to appear some distance offshore and then slowly increase in horizontal diameter and wavelength in the downwind direction, with a subsequent jump in cloud diameter downwind of the Gulf Stream North Wall (GSNW). The SAR image shows a similar evolution of sea-surface footprints of these boundary-layer features. This change in boundary-layer structure is attributed to corresponding changes in static stability. About 300 km south of the GSNW in the SAR image, an even larger jump in cell diameter appears and the cells becomenon-uniform with bright crescents and filled semi-circles on thedownwind sides of the cells. These are believed to be surface effectsof gust fronts induced by the mesoscale cellular convection and enhanced by the overall northwesterly flow.