Stability and capsizing analysis of nonlinear ship rolling in wind and stochastic beam seas

Considering the actual seaway condition, stability and capsizing of nonlinear ship rolling system in stochastic beam seas is of significant importance for voyage safety. Safe zone are defined in the phase space plan of the unperturbed Hamilton system to qualitatively distinguish ship motions as capsize and noncapsize. Capsize events are defined by solutions passing out of the safe zone. The probability of such an occurrence is studied by virtue of the random Melnikov function and the concept of phase space flux. In this paper, besides conventional wave excitation, the effect of wind load is also taken into account. The introduction of wind load will lead to asymmetry, in other words, it transforms the symmetric heteroclinic orbits into asymmetric homoclinic orbits. For asymmetric dynamical system, the orbital analytic solutions and its power spectrum are not readily available, and the technique of discrete time Fourier transformation (DTFT) is used. In the end, as verification of theoretical critical significant wave height, capsizing probability contour diagram is generated by means of numerical simulation. The contour diagram shows that these analytical methods provide reliable and predictive results about the likelihood of a vessel capsizing in a given seaway condition.     

A novel method to estimate mineral compositions of mudrocks: A case study for the Canadian unconventional petroleum systems

The mineral composition of mudrocks is an essential attribute in controlling the reservoir quality of unconventional petroleum systems. The present study introduces a semi-quantitative method to estimate mineral phases of mudrocks in various Canadian unconventional hydrocarbon systems using total elemental analysis (inductively coupled plasma-mass spectrometry (ICP-MS)) and Rock-Eval data (total organic carbon (TOC) and mineral carbon (MinC)).This method involves statistical analysis based on a sound knowledge of hydrocarbon source rock inorganic geochemistry. The workflow can be divided into four steps: (i) converting major elements (Si, Al, Fe, K, Na, Ca, Mg, Ti, and P) to their oxides, (ii) inferring modes of occurrence of elements using statistical analysis of geochemical data (major elements, TOC, and MinC), (iii) identifying the mineral types (oxide, aluminosilicates, carbonates, sulfide, and phosphate) according to elemental occurrences and calculating mineral phase concentrations, and (iv) verifying the results by comparing to XRD data on selected samples. The results, especially for brittle minerals such as quartz, carbonates (e.g. calcite, dolomite, and ankerite), and pyrite, show that the estimated mineral compositions correspond closely and consistently with measured mineralogy obtained from XRD. This method takes advantage of bulk geochemical data already available for hydrocarbon potential and chemostratigraphic studies, without devoting additional samples and cost for XRD analysis.     

Community‐Derived Standards for LA‐ICP‐MS U‐(Th‐)Pb Geochronology – Uncertainty Propagation,Age Interpretation and Data Reporting

The LA‐ICP‐MS U‐(Th‐)Pb geochronology international community has defined new standards for the determination of U‐(Th‐)Pb ages. A new workflow defines the appropriate propagation of uncertainties for these data, identifying random and systematic components. Only data with uncertainties relating to random error should be used in weighted mean calculations of population ages; uncertainty components for systematic errors are propagated after this stage, preventing their erroneous reduction. Following this improved uncertainty propagation protocol, data can be compared at different uncertainty levels to better resolve age differences. New reference values for commonly used zircon, monazite and titanite reference materials are defined (based on ID‐TIMS) after removing corrections for common lead and the effects of excess ²³⁰Th. These values more accurately reflect the material sampled during the determination of calibration factors by LA‐ICP‐MS analysis. Recommendations are made to graphically represent data only with uncertainty ellipses at 2s and to submit or cite validation data with sample data when submitting data for publication. New data‐reporting standards are defined to help improve the peer‐review process. With these improvements, LA‐ICP‐MS U‐(Th‐)Pb data can be considered more robust, accurate, better documented and quantified, directly contributing to their improved scientific interpretation.     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.     

柴达木盆地东部上石炭统克鲁克组碎屑岩储层特征及控制因素

柴达木盆地上石炭统克鲁克组是该区重要的古生界勘探层位,组内发育多套良好的碎屑岩层。为探究其岩石物性特征及控制因素,本次以野外露头调查为基础,利用普通薄片、铸体薄片鉴定及扫描电镜等手段,结合物性测试和压汞资料,对克鲁克组碎屑岩纵向分布规律,储层岩性、物性、孔喉特征及孔隙类型进行分析。认为克鲁克地层中克2段发育的三角洲前缘亚相和克3段的具障壁海岸潮坪相的大套含砾粗砂岩、粗砂岩砂体原生、次生孔洞发育,孔喉大、分布集中、分选好,为有利的碎屑岩储层。早成岩期压实作用、重结晶及胶结作用对克鲁克组砂岩的原生孔隙破坏严重,晚成岩期储层改造形成的溶孔、裂缝—溶孔是油气成藏的主要储存空间。该研究为预测柴东石炭系克鲁克组油气有利区域提供依据,为今后该地区的油气勘探提供理论支撑。     

全风化花岗岩地层中高固相离析浆液灌浆机理研究

全风化花岗岩地层稳定性差、遇水易发生崩解,工程上使用常规材料防渗加固注浆时效果较差。针对这一情况,依托湖南省郴州市莽山水库防渗加固灌浆项目,通过自主设计的全风化花岗岩地层注浆室内模拟试验装置,进行模拟注浆试验,实现了浆液在整个注浆过程中的扩散情况模拟,对不同注浆压力、不同位置点所取试样开展单轴抗压、抗剪强度及渗透率测试试验,对不同注浆压力下完整结石体取样观察,研究以全风化花岗岩颗粒为配方主体材料的高固相离析浆液在全风化花岗岩地层的防渗加固效果及浆液扩散模式。结果表明:该浆液在全风化花岗岩地层扩散过程中经历了渗透扩散、挤密压缩、劈裂扩展三个阶段,是一种复合注浆形式;以全风化花岗岩颗粒为主体的高固相离析浆液在全风化花岗岩地层注浆中效果显著,随着注浆压力提升,单轴抗压强度显著提升为原土体的3.25～13.67倍,抗剪强度在不同法向压力情况下提升为原土体的1.63～2.69倍,渗透系数从10?4 cm/s下降至10?5 cm/s甚至10?6 cm/s。     

微束分析测试技术十年(2011~2020)进展与展望

现代地球科学研究的重大突破在很大程度上取决于观测和分析技术的创新。新世纪以来,我国地球科学领域引进了一批高性能新型微束分析仪器设备,建立了一批高规格的实验室。本文回顾了近十年来微束分析技术与方法的主要进展及其在地球科学研究中的应用实例,包括电子探针、扫描电镜、透射电镜、大型离子探针、纳米离子探针、飞行时间二次离子质谱、激光剥蚀等离子体质谱、激光诱导原子探针、原子探针技术、显微红外光谱、同步辐射等,这些分析技术的进步和广泛应用极大地提高了我们对地球和行星演化历史及许多地质过程的理解。今后,应加快微束分析的新技术、新方法和新标准的开发,特别是高水平人才队伍建设,提高创新能力并在国际学术舞台上发挥重要作用。     

Rapid U‐Pb Geochronology by Laser Ablation Multi‐Collector ICP‐MS

Detrital zircon (DZ) U‐Pb laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) has revolutionised the way geologists approach many Earth science questions. Although recent research has focused on rapid sample throughput, acquisition rates are limited to 100–300 analyses h^?1. We present a method to acquire zircon U‐Pb dates at rates of 120, 300, 600 and 1200 analyses h^?1 (30, 12, 6 and 3 s per analysis) by multi‐collector LA‐ICP‐MS. We demonstrate the efficacy of this method by analysing twelve zircon reference materials with dates from ~ 3465 to ~ 28 Ma. Mean offset from high‐precision dates increases with faster rates from 0.9% to 1.1%; mean random 1s uncertainty increases from 0.6% to 1.3%. We tested this new method on a sandstone sample previously characterised by large‐n DZ geochronology. Quantitative comparison shows increased correspondence among age distributions comprising > 300 dates. This new method holds promise for DZ geochronology because (a) it requires no major changes to hardware, but rather modifications to software; (b) it yields robust age distributions well‐suited for quantitative analysis and maximum depositional age calculations; (c) there is only a minor sacrifice of accuracy and measurement uncertainty; and (d) there is less burden to researchers in terms of time investment and analytical cost.     

基于三维激光扫描技术的岩质边坡泥化夹层空间分布和几何形态

为了定量研究泥化夹层的空间分布和几何形态,以云南省玉溪市生活垃圾焚烧发电厂高边坡局部开挖剖面为对象,利用徕卡ScanStation C10三维激光扫描仪和瑞典ROMER RA-7520-2六轴关节臂三维测量仪进行扫描,得到了开挖剖面和泥化夹层的原始点云数据;然后采用Cyclone和Geomagic Wrap软件对点云数据进行一系列处理,分析了泥化夹层的三维空间分布、层面产状、间距、层面粗糙度和几何形态。结果表明：大部分泥化夹层横向分布于整个扫描剖面,少数呈局部分布;泥化夹层的平均倾向为196.41°±5.51°,平均倾角为22.27°±2.23°,间距在3.7~49.1 cm之间,平均值为（20.4±12.0）cm;不同层位及同一层位不同横向位置的泥化夹层厚度都不等,最厚约20 mm,最薄小于1 mm;泥化夹层顶面局部典型区域的平面拟合偏差在-22.4~32.5 mm之间,沿夹层倾向的粗糙度系数在5.67~16.77之间,平均值为10.11±3.25;泥化夹层的表面积与体积之比在5.14~5.86 cm^-1之间。运用三维激光扫描技术研究泥化夹层的空间分布和几何形态是可行的。玉溪市生活垃圾焚烧发电厂高边坡的泥化夹层具有宏观整体上相对平直、相互近似平行、非等距分布、间距小、层数多、厚度薄,细观上顶面粗糙底面相对光滑、三维形态复杂的特点。