基于GIS/MIS/OA的短周期工业原料林经营模式研究

提出了短周期工业原料林经营模式的概念,探讨了短周期工业原料林经营模式的体系结构、子系统功能和主要林业数表类型,说明其与GIS/MIS/OA系统集成的必然趋势,并以岳阳纸业股份公司的纸浆原料林为例进行了实例分析。     

惯性／双星组合导航系统的滤波与仿真

介绍了惯性导航系统和双星导航系统各自的运行方式和优缺点；详细推导了组合导航系统的误差方程和量测方程；介绍了Kalman滤波的整个过程并最后进行了仿真计算。仿真结果显示，惯性导航系统和双星导航系统的组合弥补了各自的不足，具有较好的精度和可靠性。     

基于GIS的商业网点选址研究与实现

利用平面／网络优化模型，综合权衡市区选址的基本费用及商业网点日常经营的成本，引入交通便利因子作为限制条件，并运用直接搜索的Dixon方法，加强了不确定性选址问题的约束条件，降低不确定性问题计算的复杂度，减少在选址问题实现中主观因素对选址结果的影响。最后以某区新建商业网点选址为例，详细分析了直接搜索算法应用的具体过程。     

参量阵浅地层剖面测量技术 在近岸海洋工程的应用效果

介绍了海底浅地层声学探测技术的发展情况, 简述了新型参量阵声纳探测的原理和特点, 通过SES-96参量阵测深或浅地层剖面系统在山东半岛海区的应用实例, 对此新型参量阵声纳技术的应用效果进行了分析评价。     

山西沁水盆地煤层气成藏的微观动力能条件研究

煤层气成藏的微观动力能条件主要包括煤储层的孔隙—裂隙系统、煤储层的生气作用和储气作用两个方面。以山西沁水盆地为例,深入剖析了煤储层的孔隙—裂隙系统及其发育历程、煤储层的生气作用与能量聚散,阐明了煤层气成藏的微观动力能对成藏效应的控制作用。结果表明:构造作用对储层渗透率具有明显的控制作用,成烃增压致使能量聚集,成为盖层突破作用的主要驱动力,而能量放散则主要是通过煤储层孔隙—裂隙系统的产生、发展。根据上述研究成果,沁水盆地煤层气成藏的地质区划结果为:盆地南部的有利区带为阳城和晋城的北部地区,包括潘庄、樊庄、郑庄等地区;盆地中部的有利区带为安泽—沁源地区,位于盆地西斜坡的中南部;盆地北部的可能有利区带为寿阳东南部地区,位于榆次东北部和阳泉西南部之间。     

HD-4002型综合测井仪

HD 4002型综合测井仪是核工业北京地质研究院于1998年开始研制的, 其目标是为铀矿地质系统提供适合砂岩型铀矿勘查的轻便型数字测井仪, 满足测井生产的需要。该仪器于2001 年3月通过部级鉴定, 2002至2003年投入海拉尔盆地铀矿勘查测井试生产。本文介绍了仪器的用途、功能及特点、性能指标, 简要说明了各部分的工作原理。     

全国资源与生态环境遥感监测数据管理与应用服务系统设计

为推动资源与生态环境遥感监测数据的应用与服务,为国家、相关行业管理决策和社会公众提供有价值的信息,需要在资源与生态环境遥感监测成果数据基础上,开发数据管理与应用服务系统。本文从国家资源与生态环境建设的实际需求出发,结合国土资源部实施的环北京地区资源与生态环境遥感监测成果,探讨资源与生态环境遥感监测数据管理与应用服务的技术解决方案,搭建资源与生态环境遥感监测数据管理与应用服务技术平台,并实现网络环境下对资源与生态环境监测形成的各种类型数据的集成化管理。     

Land-use classification using ASTER data and self-organized neutral networks

Operationally AVHRR and TM/TM+ data were used and a supervised maximum likelihood classification (MLH) was applied to depict land use changes in Beijing, providing basic maps for planning and development. With rapid growth of the city these are helpful to deal with higher resolution data, whereas new classification algorithms produce land use maps more accurate. In the paper, new sensor ASTER data and the Kohonen self-organized neural network feature map (KSOM) were tested.The TSOM classified 7% more accurately than the maximum likelihood algorithm in general, and 50% more accurately for the classes ‘residential area’ and ‘roads’. The results suggest that ASTER data and the Kohonen self-organized neural network classification can be used as an alternative data and method in a land use update operational system.     

Particle size dependent response of aerosol counters

During an international workshop at the Institute for Experimental Physics of the University of Vienna, Austria, which was coordinated within the Committee on Nucleation and Atmospheric Aerosols (IAMAS-IUGG), 10 instruments for aerosol number concentration measurement were studied, covering a wide range of methods based on various different measuring principles. In order to investigate the detection limits of the instruments considered with respect to particle size, simultaneous number concentration measurements were performed for monodispersed aerosols with particle sizes ranging from 1.5 to 50 nm diameter and various compositions.The instruments considered show quite different response characteristics, apparently related to the different vapors used in the various counters to enlarge the particles to an optically detectable size. A strong dependence of the 50% cutoff diameter on the particle composition in correlation with the type of vapor used in the specific instrument was found. An enhanced detection efficiency for ultrafine hygroscopic sodium chloride aerosols was observed with water operated systems, an analogous trend was found for n-butanol operated systems with nonhygroscopic silver and tungsten oxide particles.     

Parameter identification of inelastic structures under dynamic loads

The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd.