应用航放资料寻找非放射性金属矿产效果探讨

本通过对粤北地区已知的52个非放射性金属矿床（点）的地质、物化探特征的统计资料综合分析，建立了评价非放射性金属矿产成矿远景的航空能谱参数模型，结合重磁测量、重砂测量及金属量测量成果，预测了4片非放射性金属矿产成矿远景区。     

总磷作为饮用水生物稳定性控制指标的研究

根据国内提出的控制饮用水生物稳定性的可同化有机碳(AOC)标准,通过配制水样研究了AOC及细菌再生长潜力(BRP)同水中磷含量的关系;同时针对净水工艺试验出水水样,考察了水中的磷同其生物稳定性的关系。结果表明,对于配水水样,在一定的磷浓度范围内,磷是水中细菌生长的限制因子;在净水试验工艺出水水样中添加50μg/L的PO₄3--P后,AOC增加了55%,BRP增加了123%,表明水中磷是其生物稳定性的限制因子。由于常规的净水工艺对水中的磷可以有效去除,把水中总磷(TP)控制在5μg/L内来提高饮用水生物稳定性具有一定的可能性和现实性。     

油气化探综合异常模糊划分动态聚类分级评价

通过选取描述油气化探综合异常的各种特征参量，借助模糊数学工具，利用最优聚类中心所具有的代表特征，建立分级指标，对油气化探综合进行分级评价。鄂尔多斯盆地油气化探综合异常的评价实例结果表明，利用油气化探综合异常各种特征参量进行动态聚类分级评价是可行的。     

地震参数计算与数据传输程序设计

设计了一种地震参数计算与数据传输程序，能够通过交互方式自动完成mb、mB、MS7、MS、ML五个震级及其他相关地震参数的计算，自动生成大震速报文件，直接连接PCU速报。不仅适用于数字地震仪同时也可以用于模拟仪器(如DD—1，DK—1)解决了SSB大震速报软件数据不易改动、容易出错、速度慢等问题。同时也完善了SSDP软件参数计算功能，提高了数字测震台的效能和速报水平，充分发挥了数字地震仪的优越性。     

Compression of the North Hemisphere derived from space geodesy

Introduction With the development of global tectonics and overall detections for global tectonics with multi-geophysical methods, ones can roundly study on the geological tectonics of sampling and magnetic stripe image, so as to summarize and interpret the geometrical and kinematical charac-teristics for the distribution of the ocean and the land, and spreading state of the global tectonics in a global scale. From a comprehensive view, the South and North hemispheres are clearly unsym-metrical…     

The inversion of anelastic coefficient,source parameters and site respond using genetic algorithm

It gradually becomes a common work using large seismic wave data to obtain source parameters, such as seismic moment, break radius, stress drop, with completingof digital seismic network in China (Hough, et al, 1999; Bindi, et al, 2001). These parameters are useful on earthquake prediction and seismic hazard analysis.Although the computation methods of source parameters are simple in principle and the many research works have been done, it is not easy to obtain the parameters accurately. There are two factors affecting the stability of computation results. The first one is the effect of spread path and site respond on signal. According to the research results, there are different geometrical spreading coefficients on different epicenter distance. The better method is to introduce trilinear geometrical spreading model (Atkinson, Mereu, 1992; Atkinson, Boore, 1995; WONG, et al, 2002). In addition, traditional site respond is estimated by comparing with rock station, such as linear inversion method (Andrews, 1982), but the comparative estimation will introduce some errors when selecting different stations. Some recent research results show that site respond is not flat for rock station (Moya, et al, 2000; ZHANG,. et al, 2001; JIN, et al, 2000; Dutta, et al, 2001). The second factor is to obtain low-frequency level and corner frequency fromdisplacement spectrum. Because the source spectrum model is nonlinear function,these values are obtained by eye. The subjectivity is strong. The small change of corner frequency will affect significantly the result of stress drop.     

Calibration of an oscillating nozzle‐type rainfall simulator

Nozzle‐type rainfall simulators are commonly used in hydrologic and soil erosion research. Simulated rainfall intensity, originating from the nozzle, increases as the distance between the point of measurement and the source is decreased. Hence, rainfall measured using rain gauges would systematically overestimate the rainfall received at the ground level. A simple model was developed to adjust rainfall measured anywhere under the simulator to plot‐wide average rainfall at the ground level. Nozzle height, plot width, gauge diameter and height, and gauge location are required to compute this adjustment factor. Results from 15 runs at different rain intensities and durations, and with different rain gauge layouts, showed that a simple average of measured rain would overestimate the plot‐wide rain by about 20 per cent. Using the adjustment factor to convert measured rainfall for individual gauges before averaging improved the estimate of plot‐wide rainfall considerably. For the 15 runs considered, overall discrepancy between actual and measured rain is reduced to less than 1 per cent with a standard error of 0·97 mm. This model can be easily tested in the ?eld by comparing rainfall depths of different sized gauges. With the adjustment factor they should all give very similar values. Copyright © 2003 John Wiley & Sons, Ltd.     

基于约束点的曲线一致性化简

详细探讨了基于平面上的特征约束点(无论在曲线上还是在曲线外)的曲线化简，并针对各种情况提出了一致性化简的方法。     

地图数字化数据处理的相关平差与精度分析

根据地图数字化坐标转换方法、转换所得地面坐标平差方法 ,得到数字化数据处理的几种方案 ,对不同方案的计算结果进行比较 ,讨论了相关性对平差结果的影响 ,并对数字化数据的精度评定进行了分析     

观测有效性的度量方法

基于Hilbert空间理论 ,通过对观测方程的系数阵实施格拉姆_施密特 (Gram_Schmidt,G_S)正交化过程 ,分析观测的两个特性 ,从一个新的角度论证了参数估计的必要观测问题 ,以及多余观测与必要观测的关系 ;用欧氏范数‖·‖2 和Frobenius‖·‖ F 范数作为基本度量工具对观测提供参数估计的信息量进行度量分析 ,研究观测的有效性和参数估计的可靠性。采用观测空间分析方法研究了测绘学科中必要观测、多余观测等基本概念 ;提出了观测信息量、观测有效性的概念和相应的度量方法 ;从观测的空间结构出发分析参数估计系统的可靠性 ,从一个侧面扩展和丰富了测绘学中的可靠性理论 ;丰富了研究测绘学中一些基本问题的分析方法 ,也为信息学中的数据挖掘问题提供了一种分析思路