基于Web的地下管网溯源分析算法研究

利用.NetCore的并行运算机制,实现基于Web的高性能地下管网的溯源分析功能.实践证明当某点管网数据监测出现异常时,能够快速分析所有可能流经该点源头管网信息,并在地图上动态展示分析结果,达到快速定位查询管网源头的区域管理目的.     

基于Python的“地理处理”并行方案

在传统方式下,ArcGIS地理处理工具的执行过程不能充分利用高性能多核计算机的全部运算能力处理日益增加的地理数据,导致数据处理效率低下。本文在分析地理处理工具特点的基础上,充分利用Python语言的并行编程特点,构建具有通用性的地理处理任务并行运行解决方案。结合ArcGIS软件自身的特质,有效解决了并行运行所带来的数据竞争、数据共享与进程通讯等问题,达到了一定硬件环境条件下ArcGIS工具执行效率最大化的目的。通过典型地理处理任务中不同运行方式效率的对比测试与分析,证明了并行运行的有效性。     

针铁矿对湖泊草、藻来源可溶有机质的非均质吸附

为探究富营养化湖泊中自生源可溶有机质(DOM)在泥水界面的吸附行为,以马来眼子菜(Potamogeton malaianus)和铜绿微囊藻(Microcystis aeruginosa)释放的DOM为代表,考察针铁矿对草、藻源DOM中不同组分的吸附特征.三维荧光平行因子分析表明类富里酸组分C1和类胡敏酸组分C4的含量很低,而类蛋白物质(类酪氨酸组分C2和类色氨酸组分C3)分别占草、藻源DOM荧光组成的70%和93%. 2种DOM均可被针铁矿吸附,吸附过程符合伪一级动力学.通过等温线拟合发现针铁矿吸附藻源DOM的非线性更强,饱和吸附量(23.77 mg/g)高于草源DOM(19.10 mg/g).特别地,类蛋白组分呈现非线性吸附,而类腐殖物质的吸附近似线性,且针铁矿对于DOM各荧光组分的吸附量顺序为:C3>C2> C4> C1,此非均质吸附特征与DOM组分的初始含量、分子大小、芳香性及有效吸附位点有关.红外光谱证实氨基、羧基和羟基是吸附过程中的重要官能团.因此,草、藻源DOM显著改变了针铁矿表面的有机物质组成,影响湖泊沉积物的生物地球化学行为.     

松辽盆地白垩系的密集段及海水进侵的新证

在总结松辽盆地白恶系层地层特征的基础上，阐述了密集段的地质学和地球物理学标志，经分析，大多数重要反射与密集段相关而并非是层序边界，根据扫描电镜分析结果，在密集段中首次发现了钙质超微化石，为区内白垩纪海水进侵的提供了新的证据，由稳定同位素分析，密集段形成了缺氧，相对可容纳空间最大及水体最深时期。     

并行网络电法在煤层覆岩破坏监测中的应用

并行网络电法勘探现场观测数据表明,随着开采煤层上覆岩体破坏程度的加剧,其电阻率值呈上升趋势:当煤层上覆岩层视电阻率值相对于背景电阻率值增大1~2倍时为裂隙发育带;当增大3倍以上时为离层冒落带。对于全空间电阻率观测,其视电阻率值的变化主要是以突出异常为主。应用结果表明,利用并行网络电法进行煤层顶板视电阻率动态监测,可以直观反映“三带”的发育形态以及开采产生矿山压力的显现规律,为矿井安全提供有效的探测手段。     

利用MPI实现多幅点云ICP并行配准

迭代最近点算法(ICP)是一种用于点云精确配准的经典算法.针对多幅点云进行ICP配准存在耗时多、效率低的问题,本文利用消息传递接口MPI对多幅点云进行分批并行配准.首先并行求解相邻两幅点云的相邻变换矩阵,然后计算每幅点云在当前批次的局部变换矩阵,最后获得每幅点云的全局变换矩阵.本文以DELL PowerEdge R73...     

聚合物驱组合段塞分注实验研究

萨尔图油田南二区东部140号断层以东地区葡11—4油层,以多段多韵律和正韵律沉积为主,平均孔隙度30．0％,平均空气渗透率1980×10^-3μm2。水驱结束时该油层平均含水92％,采出程度39．5％。计划对该区块实施聚合物驱开采。以往经验认为,组合段塞调整注聚技术能够有效改善流度控制作用。然而对组合注入情况下如何进一步提高驱油效果、注入井分注时机、层段注入强度对开发效果有何影响却很少探讨。通过室内驱油实验,在聚驱的组合段塞注入不同时机（水驱空白阶段、含水下降阶段、含水稳定阶段、含水回升阶段）下调整注入强度实施分注以及在含水回升分注基础上进一步调整注入强度,同时对比不分注实验,评价各方案驱油效果。实验表明：不实施分注时聚驱采收率在水驱基础上提高了19．07个百分点,而组合段塞注入时实施分注均能够在不分注基础上进一步提高驱油效果;空白水驱时实施分注采收率提高幅度最大,为26．55个百分点;随着分注时机的滞后采收率提高幅度增加值依次递减,分注时机越早越好。     

遥感影像并行分割的无缝拼接算法

针对影像数据分块并行处理造成的接边问题,该文基于构建缓冲区的方法提出了一种新的拼接算法。该算法只在每一个数据分块的右侧和下侧构建缓冲区,消除拼接线的原则是保证分割边界的准确性和拓扑关系的正确性。数据分块完成后采用并行的策略对第一个块进行分割,然后将每一块的分割结果与相邻的块进行拼接,在缓冲区内按一定规则判断各块分割对象是否保留并对拓扑关系进行检查,拼接完各块后并行输出对象矢量化后的结果。通过实验验证,该算法不仅保证了分割边界的准确性,而且能够处理大影像,提高了工作效率。     

Calculation of the added mass of circular cylinders in shallow water

The added mass of hull section shapes must be known, in order to carry out any studies of ship motions, which may be associated with either seakeeping or manoeuvring. Determination of the added mass in deep water can involve conformal mapping or surface singularity distributions. However, in shallow water the problem of determining the added mass is made more difficult by the proximity of the seabed. In this paper, three approaches to the problem of finding the added mass of semi-circular sections are explored. Although there is no known exact solution to this problem, the relationships given by the three methods are compared and the approximate nature of the solutions is examined. The first method is a series solution, which is taken here to include more terms than are normally given in the existing literature. The other two solutions are considered to be new, and so are given in some mathematical detail.     

基于三维荧光光谱-平行因子技术联用的浮游藻化学分类学技术研究

An in vivo three-dimensional fluorescence method for the determination of algae community structure was developed by parallel factor analysis(PARAFAC) and CHEMTAX. The PARAFAC model was applied to fluorescence excitation-emission matrix(EEM) of 60 algae species belonging to five divisions and 11 fluorescent components were identified according to the residual sum of squares and specificity of the composition profiles of fluorescent. By the 11 fluorescent components, the algae species at different growth stages were classified correctly at the division level using Bayesian discriminant analysis(BDA). Then the reference fluorescent component ratio matrix was constructed for CHEMTAX, and the EEM–PARAFAC–CHEMTAX method was developed to differentiate algae taxonomic groups. The correct discrimination ratios(CDRs) when the fluorometric method was used for single-species samples were 100% at the division level, except for Bacillariophyta with a CDR of 95.6%. The CDRs for the mixtures were above 94.0% for the dominant algae species and above 87.0% for the subdominant algae species. However, the CDRs of the subdominant algae species were too low to be unreliable when the relative abundance estimated was less than 15.0%. The fluorometric method was tested using the samples from the Jiaozhou Bay and the mesocosm experiments in the Xiaomai Island Bay in August 2007. The discrimination results of the dominant algae groups agreed with microscopy cell counts, as well as the subdominant algae groups of which the estimated relative abundance was above 15.0%. This technique would be of great aid when low-cost and rapid analysis is needed for samples in a large batch. The fluorometric technique has the ability to correctly identify dominant species with proper abundance both in vivo and in situ.