一种改进的高铁无砟轨道检测方法

无砟轨道的静态检测通常是沿着轨道线路对轨枕逐个检测,这样做虽然能够满足工程精度的需要但是工作效率较低。文中通过比较不同的插值方法的优缺点,最终选择通过三次样条插值对静态轨道检测的隔轨数据进行处理,并结合贵广高铁检测工程在采用不同的测量方案下,对高铁线路直线段和曲线段的插值结果进行分析。并且用内插后的轨检数据结果与连续测量后得到的轨检数据进行比较,得出不同条件下最有效、最准确的测量与数据处理的实施方案,工程实践证明,文中提出的检测与数据处理手段具有准确性和高效性。     

基于多参量的模拟退火全局优化傅里叶有限差分算子

傅里叶有限差分法(FFD)能够处理复杂地质构造中的波传播问题,但对陡倾角成像仍有明显的误差.优化参数的方法能够在保持计算效率的前提下进一步提高陡倾角的成像精度.本文在有理近似的基础上,将FFD算子展开式中的常系数由两个拓展为四个,然后采用模拟退火算法对这四个参数进行全局优化.本方法除了考虑速度对比度以外,还考虑了频率和延拓步长等参量的影响.理论误差分析和脉冲响应测试均表明该方法能极大地提高FFD算子的精确传播角度.二维SEG/EAGE盐丘模型实验表明本文方法对陡倾角以及盐下构造的成像精度明显高于未优化的FFD法.将本文的方法与交替方向加插值的方法结合应用于三维脉冲响应测试更进一步证实了本文方法的有效性.     

基于回声探测监测沉水植物盖度的插值方法研究:以杭州西湖沉水植物盖度监测为例

沉水植物作为水生态系统的重要组成成分,在水生态系统物质循环和能量流动中发挥着重要作用,其覆盖度和生物量是评价湖泊等浅水水体系统稳定性的关键参数随着高效和无损伤监测的回声探测仪在沉水植物盖度监测中的应用,其精确度算法也受到了越来越多的关注本研究以成功恢复沉水植物的浅水湖泊杭州西湖为研究对象,利用BioSonics便携型回声探测仪——MX采集沉水植物回声样本同时结合人工样方设置,采集与回声探测对应位点的沉水植物样本,验证回声探测结果的精确性通过建立回归模型分析回声探测得到的沉水植物体积百分比(PVI)与人工样方获得的对应平均鲜重关系,结果表明二者具有较好的相关性分别采用普通克里金法、反距离权重法、径向基函数法3种插值方法对同一季节的不同湖泊和同一湖泊的不同季节未采集区域沉水植物的盖度数据进行插值分析,并对插值结果进行交叉验证,以确定方法的精确度交叉验证结果表明,插值精确度反距离权重法径向基函数法普通克里金法研究结果为回声探测与插值分析方法结合在大尺度浅水水体中沉水植物监测应用提供了技术支撑.     

A method for assessing local variation among scattered measurements

Automatic triangulation of scattered locations permits analysis of local variation in a dependent variable through calculation of a roughness index. This is approached by treating triangles of the triangulation (including the dependent variable) as vectorial structures, and accumulating at each data point the vector sum of the cluster of triangles surrounding it. The roughness index is defined as the complement of the ratio of the area of a triangle cluster to the area of component triangles as projected onto a gradient plane defined by their vector sum. The roughness index provides a measure of consistency of data values relative to surrounding observations and can be interpreted as a local index of reliability of interpolation.     

Quality control and homogeneity of Turkish precipitation data

Outlier trimming and homogeneity checking/correction were performed on the monthly precipitation time series of various lengths from 267 stations in Turkey. Outlier values are usually found during dry summer months, and are concentrated mostly over the southern parts of the country, where the dry period is most pronounced, implying natural extremes rather than wrong measurements. Homogeneity analysis was done using the Standard Normal Homogeneity Test, on an individual monthly basis, which led to many non‐testable series due to lack of reference stations, especially during summer months. Yet, remaining testable months were usually helpful for the assessment of homogenity, revealing a well distributed set of stations that proved to be homogeneous. There were still a number of stations which either could not be tested efficiently, or were classified as inhomogeneous. Lack of metadata is argued to be largely responsible for inefficient homogeneity testing. Copyright © 2008 John Wiley & Sons, Ltd.     

Streamflow estimation using optimal regional dependency function

The determination of spatial dependency of regionalized variable (ReV) is important in engineering studies. Regional dependency function that leads to calculation of weighting coefficients is required in order to make regional or point‐wise estimations. After obtaining this dependency function, it is possible to complete missing records in the time series and locate new measurement station. Also determination of regional dependency function is also useful to understand the regional variation of ReV. Point Cumulative Semi‐Variogram (PCSV) is another methodology to understand the regional dependency of ReV related to the magnitude and the location. However, this methodology is not useful to determine the weighting coefficient, which is required to make regional and point‐wise estimations. However, in Point Semi‐Variogram (PSV) proposed here, weighting coefficient depends on both magnitude and location. Although the regional dependency function has a fluctuating structure in PSV approach, this function gradually increases with distance in PCSV. The study area is selected in Mississippi river basin with 38 streamflow stations used for PCSV application before. It is aimed to compare two different geostatistical models for the same data set. PSV method has an ability to determine the value of variable along with optimum number of neighbour stations and influence radius. PSV and slope PSV approaches are compared with the PCSV. It was shown that slope slope point semi‐variogram (SPSV) approaches had relative error below 5%, and PSV and PCSV methods revealed relative errors below 10%. Copyright © 2009 John Wiley & Sons, Ltd.     

斜压罗斯贝变形半径优化的误差相关尺度及其对最优插值效果的改进

利用最优插值方法进行三维温盐场重构时,如何正确估算背景场误差协方差至关重要。针对背景场误差协方差主要取决于误差相关尺度的问题,本文提出了用中国东部海域及其附近海域的最新的高分辨率气候态数据进行斜压罗斯贝变形半径优化其误差相关尺度计算的研究方案和技术途径;对比分析了均一化相关尺度方案和法国ISAS系统尺度方案,讨论了变形半径对最优插值的影响。结果表明:均一化相关尺度方案的均方根误差小于ISAS方案,但温度场过于平滑,难以刻画一些重要的物理现象;相比而言,本文提出的基于变形半径的相关尺度方案在取2倍变形半径时,不仅均方根误差在各水平层较小,且温度场能够更好地刻画四国海盆海域涡旋及黑潮影响的温度场三维结构。由于实际海洋中各层物理过程的尺度存在差异,实际应用时各层的最优尺度设置也应有所不同。     

合肥义城地区土壤重金属污染评价中典型插值方法的对比

空间插值对于土壤中重金属元素的空间分布及污染评价具有重要意义。对合肥义城地区土壤中的Cu、Pb、Zn、Cd、As、Hg等污染重金属元素,以常用且具有代表性的反距离加权法、径向基函数法、普通克里格法,进行了空间插值的对比验证分析和评价。通过对各种元素的空间插值各种误差进行综合比较的结果表明：Cu、Pb、As元素采用普通克里格法进行插值结果最优,而Zn元素采用反距离加权法最优,对于Cd、Hg元素则径向基函数插值法最优。     

基于改进Kriging插值模型的城市地面沉降变形趋势面模拟

从建筑物荷载引发地面沉降的机理模型出发,综合考虑建筑物产生的附加应力以及地基土壤压缩性质对沉降量的影响,构建了改进克里金插值模型。通过实际应用证明,使用改进克里金插值模型进行城市地面沉降空间趋势面模拟和计算,能够准确清晰地反映沉降变形的大小和趋势,从而为地面沉降的空间建模与可视化分析、总结建筑物荷载作用下城市地面沉降的变形规律奠定基础。