硅质碎屑砂岩中胶结物来源的新认识

分析了浅埋藏砂岩的成岩环境,并从岩石学、矿物学、同位素及质量平衡估算方面论证硅质碎屑砂岩中的胶结物主要来源于砂岩浅埋藏期间的地下水,进而分析浅埋藏带内地下水的流动机制及早期胶结作用对晚期成岩作用的影响。     

采矿引起的边坡倾倒滑移变形机理与变形安全性分析研究—以抚顺西露天矿边坡为例

在矿山开发、水电建设过程中倾倒变形问题日渐突出。倾倒变形边坡一般具有反倾边坡结构,变形的过程和机理比较复杂、涉及的变形岩体范围较大、危害严重。论文以抚顺西露天矿边坡为例,通过岩体位移监测资料的跟踪分析、底面摩擦模拟试验,以岩体力学、松散介质力学原理为理论基础,探讨了采矿影响下边坡倾倒滑移体的变形机理,分析认为采矿引起的倾倒滑移变形问题是在特定的地质构造和采矿工程条件下产生的,并提出了岩体变形安全性分析方法。通过工程实例,验证了方法的实用性,并针对实际问题提出了变形整治对策。     

矿井明水注浆技术

明水注浆是在巷道已经发生涌水后进行堵水注浆的一种方法，以开滦东欢坨矿井下明水注浆实践为基础，阐述了明水注浆技术及注浆工艺。大水矿井由于排水电费占生产成本的比例较大，影响企业的经济效益，进行明水注浆有着重要的意义。     

GIS空间过程建模系统初探

阐述了GIS空间过程和空间过程建模的概念，提出了空间过程建模系统的概念框架，分析了其功能需求和主要的支撑技术。     

地理空间元数据和基于网络的数据分发技术

首先介绍了元数据、地理空间元数据的概念，探讨了在互联网时代研究地理空间元数据的迫切性和必要性；其次，论述了构建基于网络的数据分发方案的可行性，并就其中的关键技术实现做了深入的探讨；最后，提出了一个以地理空间元数据标准为依据，以Internet为依托的数据分发站点的整体设计方案以及实现这项技术还应考虑的问题。     

计算机网络的分布式计算环境及分布式处理

本文对网络计算模式、分布式计算环境以及分布式处理机能作了分析和探讨。     

露天矿边坡实用型专家系统PESOPS V1.0的设计与应用

结合边坡工程和岩质边坡普遍存在的问题，建造了一个露天矿边坡实用型专家系统ＰＥＳＯＰＳ Ｖ１．０。介绍了滑坡预报子系统的原理和方法，通过应用实例表明该子系统适用性强，预报可靠、使用方便。     

Assimilating data into open ocean tidal models

The problem of deriving tidal fields from observations by reason of incompleteness and imperfectness of every data set practically available has an infinitely large number of allowable solutions fitting the data within measurement errors and hence can be treated as ill-posed. Therefore, interpolating the data always relies on some a priori assumptions concerning the tides, which provide a rule of sampling or, in other words, a regularization of the ill-posed problem. Data assimilation procedures used in large scale tide modeling are viewed in a common mathematical framework as such regularizations. It is shown that they all (basis functions expansion, parameter estimation, nudging, objective analysis, general inversion, and extended general inversion), including those (objective analysis and general inversion) originally formulated in stochastic terms, may be considered as utilizations of one of the three general methods suggested by the theory of ill-posed problems. The problem of grid refinement critical for inverse methods and nudging is discussed.     

Bedload transport resistance in rough open‐channel flows

During bedload movement by saltation, streamwise momentum is transferred from the ?ow to the saltating grains. When the grains collide with other grains on the bed or in the ?ow, streamwise momentum is reduced, and there is a decrease in streamwise ?ow velocity and an increase in ?ow resistance, herein termed bedload transport resistance f_bt. Based on experiments in two ?umes with ?xed and mobile plane beds and previously published data, an equation is developed that may be used to predict f_bt for both capacity and non‐capacity ?ows. The variables in this equation are identi?ed by dimensional analysis and the coef?cients are determined by non‐linear regression. This equation applies to rough turbulent open‐channel ?ows, where the relative submergence is between 1 and 20 and the entire sediment load moves by saltation. An investigation of the relative magnitudes of f_bt and grain resistance f_c suggests that where dimensionless shear stress θ is less than 1 and saltation is the dominant mode of bedload transport, f_bt/f_c increases with θ but never exceeds 1. Copyright © 2004 John Wiley & Sons, Ltd.     

Hydro-thermal performance of multilayer capillary barriers in arid lands

In this study, a capillary barrier system was designed and tested for an arid land environment. To simulate arid land conditions of high temperature and sub-irrigation systems, the barrier was subjected to thermal and hydraulic gradients in opposite directions; to test the barrier system under these severe conditions, an experimental apparatus was designed and fabricated. The multilayer capillary barrier consisted of three layers made of silica sand, a mixture of sand and bentonite in equal portions, and a mixture of clay (25%) and aggregate (75%). Several one dimensional coupled heat and moisture tests were performed. Temperature variations along the thickness of the barrier were recorded as a function of time, and at the end of each test, the barrier was sliced into small sections, for the determination of volumetric water content as a function of distance from the heat source. The experimental results were discussed in view of the barrier's intended purpose of its ability to store moisture for long time durations. Coupled heat and moisture flow equations were developed and solved numerically via a finite difference method. Diffusivity parameters were calculated by using experimental results, a numerical model, and Powell's conjugate directions method of nonlinear optimization. The model was calibrated and the results were discussed. Good agreement between calculated and experimental results was obtained. This revised version was published online in July 2006 with corrections to the Cover Date.