基于MAPGIS的军事标图系统的设计

军事领域是一个非常特殊的行业，信息的安全性和空间数据的多样性是应用开发的重要问题。在全球信息化日趋高速发展和逐步成熟的今天，军队信息化建设也必须与GIS技术紧密结合，跟上时代前进的步伐。较系统地研究了GIS技术在军事标图绘制中的应用和集成问题，并提供了相应的理论方法和实现系统。在此基础上介绍了以MAPGIS为开发平台的军事标绘系统的实用功能和特点。首先分析了军事信息系统对地理信息数据的要求，并且评述了相关领域的研究现状。然后较为系统地介绍了军事标图系统的总体设计，根据军事标绘对象的数据特征，设计符合要求的应用系统提出了面向对象和无缝交互工具等的设计思想。对军标对象数据模型和操作模型进行了详细地阐述和说明，并将这些模型在系统中进行了实现。最后介绍了军事标图系统的主要模块和功能，探讨了今后GIS研究和发展的方向。     

强水动力湖泊夏季分层期氮的生物地球化学循环初步研究:以贵州红枫湖南湖为例

湖泊在夏季由于藻类生长而消耗大量硝酸盐,水体硝酸盐含量一般要低于春季。而红枫湖南湖水体硝酸盐含量却高于春季(比平均含量高0.83mg/L),说明尚有其他重要的硝酸盐来源。据估算,南湖水体硝酸盐含量升高0.83mg/L约需要1.66×105kg硝酸盐,另外有约10.1×105kg硝酸盐随下泻水输出南湖,再加上夏季藻类生长(生产的chla量约为640kg)所消耗的硝酸盐3.52×105kg,共消耗硝酸盐15.28×105kg。扣除河流输入的4.42×105kg硝酸盐,南湖尚存在约10.86×105kg硝酸盐的亏空。利用氮稳定同位素示踪技术,结合硝酸盐及叶绿素a(chla)含量、溶解氧(DO)等的变化,认为这部分硝酸盐来自湖泊中下部(斜温层)有机质的大量矿化(硝化),是水动力驱动高DO的上部水体下沉从而引起下部有机质(硝化)的结果。南湖这种强水动力湖泊整个夏季分层期氮的生物地球化学循环是斜温层有机质矿化(硝化)释放硝酸盐和变温层藻类生长同化硝酸盐为有机质同时发生的特殊类型。     

Modelling of meteorological conditions at an urban scale for the PUMA winter campaign

For the winter 2000 campaign of the Pollution of Urban Midlands Atmosphere project, observation and numerical modelling of meteorological conditions over the West Midlands conurbation, UK, was undertaken. Modelling was performed using the regional atmospheric meteorological system (RAMS). This paper presents a comparison of modelled and observed wind and temperature for 25 and 26 January 2000. The RAMS model uses two nested grids with a mesh size of 2 km for the inner grid which is embedded in the outer grid with a mesh size of 8 km. Statistical evaluation of the model results against the observational data of wind speed, direction and temperature at 10 m was conducted. In general, the modelling results are in a reasonable agreement with observation. The statistical evaluation suggests that model performance is poorer for the inner grid than the outer grid as the model uncertainties (mainly mean bias) transfer from the outer to inner one. The low indices of agreement of temperature and wind are mainly associated with the systematic root-mean-square-difference values. For temperature, the systematic bias may also be affected by representation of cloud amount by the model. For wind, the model tends to have a poor performance for calm conditions, as under a stable anti-cyclonic situation local wind patterns associated with topography may develop, although the topography of the region is relatively flat. The results for the inner grid reveal some subtle spatial patterns at a scale smaller than 10 km near hills and valleys with differences in elevation of a few hundred metres.     

Development and testing of numerical methods for two-way nested air pollution modelling

A new 3-D model REGINA (REGIonal high resolutioN Air pollution model) is under development at the National Environmental Research Institute (NERI). The model is based on pieces from several models developed over the last decades at NERI. The aim of the work is to develop a nested model which can operate with very high resolution in both space and time. To fulfill this aim the choice and implementation of accurate numerical methods is crucial. The model will be applied for studying air pollution phenomena (both monitoring, forecasting and scenarios) over Denmark. The present paper is focussed on the modification, implementation and testing of a numerical method for treating the horizontal advection in the model as well as the implementation of two-way nesting techniques. The horizontal transport in the model is solved using an accurate space derivative algorithm. This method is traditionally implemented with periodic boundary conditions, however, this is not an option for nested modelling. A new method for calculating non-periodic boundary conditions has been developed in order to overcome this problem. Extensive testing of the numerical solution of the advection and the coupling of the solution of advection and chemistry in the model using Molenkamp–Crowley rotation tests have been carried out. The results show that the model with the current implementation of numerical methods is suitable for calculating air pollution levels with high resolution.     

用ANSYS模拟结构-地基动力相互作用振动台试验的建模方法

本文以结构－地基动力相互作用振动台模型试验为基础，结合通用有限元软件ANSYS，对结构－地基动力相互作用体系进行有限元计算建模的一些问题作了研究，主要包括柔性土容器的模拟、土体动力本构模型的选用、土体与结构交界面上的状态非线性模型、网格划分、重力的考虑、结构中钢筋的处理以及对称性的应用等。文中给出了利用上述建模方法对结构－地基动力相互作用体系进行计算的一些加速度时程结果，并与试验结果相对照，吻合较好。通过计算分析，验证了简化处理方法的合理性和计算模型的可行性。     

基于GTP的地下工程与围岩一体化真三维空间构模

针对地下工程开挖体的基本特征及其真三维建模要求，在广义三棱柱(GTP)模型的基础上进行扩展，提出采用E—GTP模型来构建地下工程开挖体的真三维模型。通过与其围岩地质体的G—GTP模型的耦合，实现了基于GTP的工程开挖体与围岩地质体的一体化建模。该模型将地下三维空间实体抽象为点、线、面、体四类对象，通过结点、TIN边、侧边、TIN面、侧面和GTP体元共6个基本几何元素进行统一表达。该文重点讨论了E—GTP的建模原理与方法，并介绍了基于面向对象思想的一体化空间数据结构。     

“面向区域”的GIS控件的设计与使用

本文提出了一个“面向区域”GIS控件的概念———即以特定的地理区域为对象,将基础地理信息连同有关的GIS功能操作融合为一个可重用的程序模块,以Microsoft的COM(即“组件对象模型”)技术为基础,组织为“GIS化”的ActiveX控件。这种GIS控件,将面向对象技术中的“对象”扩展到了整个特定的地理区域空间,其核心思想是不仅封装了GIS的数据模型,必要的功能操作,而且封装了所有的基础地理信息。由于省去了对空间数据的处理,因而这种GIS控件可被广大非GIS专业的信息系统开发者灵活、简便地用于各种管理信息系统、办公自动化系统和决策支持系统的GIS功能扩充,也可用于构建一般的地理信息系统,因而有利于GIS技术应用的普及。文章最后给出了有关陕西省的应用实例     

我国入境旅游的特点和发展趋势分析

入境旅游人数以及旅游(外汇)收入是衡量一个国家旅游实力和开放程度的重要指标。本文在回顾中国入境旅游发展历史的基础上，通过对我国20多年入境旅游方面有关指标的分析总结了我国入境旅游具有增长的持续性、波动性和阶段性，入境旅游发展的脆弱性和集中性等特点。针对入境旅游未来的发展趋势提出加快我国入境旅游发展的建议。     

泌阳凹陷安棚油田核三段储层天然裂缝特征研究

根据岩芯裂缝观察结果,通过与FMI,MAIN成像测井资料进行对比,系统描述天然裂缝在成像测井上的影像特征,对地层裂缝特征参数进行了确定.成果反映出核三段地层中的裂缝主要为垂直裂缝倾角在80°～90°之间.走向在100°～110°左右,宽度一般小于1 mm,裂缝长度主要在30 mm以内.     

原子荧光光谱法测定地球化学样品中的砷、锑和汞的方法改进

在原子荧光光谱法中，通过改进地球化学样品的分解条件，预还原条件及测定条件，使砷、锑和汞能在同一介质中测定，而且实现了砷与汞的双道同时测定。方法的检测出限、准确度及精密度均能达到行业要求。