Calculation method for thickness of discontinuous boundary layer of engineering pavement

The boundary layer is a buffer layer of water and heat exchange between the atmosphere and permafrost.Based on the atmospheric boundary layer and heat transfer theory,we established a method for determining the boundary layer thickness of engineering pavement(asphalt and sand pavement)in permafrost region.The boundary layer can be divided into the Boundary Layer Above Surface(BLAS)and the Boundary Layer Below Surface(BLBS).From in-situ monitoring data,the thickness of BLAS was determined through the laminar thickness,and the thickness of BLBS was determined through ground temperature,the heat conduction function,and the mean attenuation function(α).For asphalt pavement,the BLAS thickness varied between 2.90 and 4.31 mm and that of BLBS varied between 28.00 and 45.38 cm.For sand pavement,the BLAS thickness varied between 2.55 and 3.29 mm and that of BLBS varied between 15.00 and 46.44 cm.The thickness varied with freezing and thawing processes.The boundary layer calculation method described in this paper can provide a relatively stable boundary for temperature field analysis.     

Diagnosis of earth-fill dams by synthesised approach of sounding and surface wave method

The spatial distribution of the strength inside the earth-fill is identified by the sounding tests. In this research, the Swedish weight sounding (SWS) is employed, and the spatial high-density test is performed to identify the spatial correlation structure. Furthermore, the synthesised approach of the SWS and surface wave method, which is one of the geophysical method, is proposed to compensate the shortage of each approach. Consequently, the correlation structure of an earth-fill could be identified accurately, and the high resolution of the spatial distribution could be visualised based on the survey results.     

Experimental Measurements of Solitary Wave Attenuation Over Shallow and Intermediate Submerged Canopy

Attenuations of solitary wave over a patch of submerged canopy are experimentally investigated. The submerged canopy is modeled by a group of circular cylinder array. The decay coefficients of different wave heights in two water depths along the wave flume are measured for six canopy models, including two canopy heights and three styles of arrangements. The relationships among the decay coefficient, and the dimensionless wave height, submergence ratio, relative height and arrangement of the canopy are experimentally studied. 2D PIV technique is employed to measure the representative flow field inside the canopy. A four-deck flow structure is proposed for wave flow field over shallow submerged canopy. The characteristics of shear flow inside the aligned canopy region are discussed.     

区域地球化学评价中变异系数校正参数的意义

通过对我国新疆西天山各地球化学区数据的归纳和研究,计算西天山12种常见成矿元素在各地球化学区的富集系数,提出校正系数公式,并将变异系数进行合理的校正与排序。与实际矿床和矿点结合,验证校正系数的正确性和适用性,预测元素成矿有利顺序和规律,总结出西天山富集系数与变异系数在成矿中的制约关系。该方法实现了不同成矿元素之间成矿条件的对比,拓宽了地球化学参数的适用性,提高了在勘探程度较低的地区地球化学评价方法的准确性,为地球化学评价提供科学依据。     

三峡库岸滑坡变形特征及影响因素分析

三峡库区涉水滑坡主要影响因素是水位和降雨量,也是库区滑坡体失稳的主要影响因素和诱发因素。库区每年重复着水位升降不利于滑坡的稳定,而降雨特别是大强度的降雨也诱发产生滑坡。当水位波动遇到降雨,出现工况叠加,滑坡将加剧。因此,有必要对影响滑坡变形的主导因素进行了解分析。2016年6月三峡库区全面展开了自动化监测,使得数据统计方便可靠。本文采用滑坡变形速率、降雨量、库水位变化、最大水位变化速率、淹没程度,运用灰色关联度分析法对涉水滑坡进行了计算分析。水位下降阶段,文中土质滑坡变形受库水位影响最大。水位上升阶段,该土质滑坡上部变形受降雨影响最大,下部受水位影响最大。文中岩质滑坡总是受库水位影响最大。     

崩塌堆积体启动坡面泥石流判别与防治 ——以北川县开坪乡平石板泥石流为例

强震区地震后大量的崩塌堆积体堆积于高陡斜坡中上部,堆积体远离居民点,一旦诱发为坡面泥石流,形成新的次生地质灾害,将严重威胁下方居民的生命财产安全。本文以北川县开坪乡平石板坡面泥石流为例,平石板沟“5.12”地震崩塌堆积体在2010、2013年强降雨作用下失稳转变为坡面泥石流淤积场镇。在平石板泥石流暴发特征介绍基础上,通过粒径不均匀系数、堆积体启动判别指标、后缘汇水面积等来分析崩塌堆积体启动条件及影响因素,并针对此类灾害发育特征,提出了通过上游稳拦固源方法进行治理的防治思路。以期为研究高陡斜坡堆积体的启动机制及防治提供一定的借鉴意义。     

逻辑回归模型在边坡稳定性分析中的应用

采用逻辑回归模型和确定性系数CF建立概率模型,使用收集到的22个边坡实例,将重度、内聚力、坡角、坡高、内摩擦角和孔隙压力比六个影响因子作为自变量,边坡状态作为因变量,应用SPSS取不同的滑坡概率P与不滑坡概率1-P的比值的自然对数Z进行回归分析。将获得的滑坡概率拟合模型反馈到样本参数上,对比其误差,选取Z=±10时的函数模型对另外8组边坡进行验证,证明预测模型的合理性。     

山西省2017年农田灌溉水有效利用系数测算分析研究

以山西省172个样点灌区为研究区域,按照《全国农田灌溉水有效利用系数测算分析技术指导细则》测算方法及要求,测算样点灌区农田灌溉水有效利用系数,在此基础上,以全省灌区统计资料为权重,测算分析得出山西省2017年大、中、小和纯井灌区农田灌溉水利用系数分别为0.484 6、0.501 0、0.475 8和0.639 8,全省系数为0.538。通过对测算成果分析,认为测算结果真实反映了当年山西省灌区农田灌溉用水效率,相关成果对山西省灌区工程建设、用水管理和规划编制等有一定指导意义。     

Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.     

矿石体重回归分析在新疆乌宗布拉克矿区的应用研究

在资源储量估算的过程中,矿石小体重的准确与否将直接影响到资源储量估算的客观程度。对矿石小体重的准确预测将需要通过大量的统计分析工作,传统的方法是利用矿石小体重的算术平均值进行估算矿床资源储量,并没有考虑到多矿种对矿石小体重的影响程度。本文利用Excel软件"数据分析"的"回归"功能模块,对实验室所测定的矿石小体重值与其对应品位进行二元线性回归分析,快速、准确地构建矿石体重与其品位的数学模型,从而为资源储量估算提供了更客观、更科学的矿石体重模型。