Scaling of response spectrum and duration for aftershocks

Aftershocks have the potential to cause collapse of a structure that has been already damaged by the preceding main shock. Seismic safety of a structure should therefore be ascertained through a damage analysis using the anticipated main shock and few larger-aftershock motions. Simulation of aftershock motions needs characterization of the seismic hazard due to aftershocks, and therefore it will be useful to develop a conditional scaling model that can predict the response spectrum of an anticipated aftershock motion consistent with the design spectrum of the main shock motion anticipated at the same station. In this study an attempt is made to develop a conditional scaling model for the pseudo spectral velocity spectrum via linear regression analysis on the aftershock and main shock recordings for the 1999 Chi–Chi earthquake. It is shown that it may be possible to obtain a simpler and approximate version of the conditional model from an unconditional model. Damage-causing potential of a ground motion also depends on its strong motion duration (SMD) and therefore a conditional scaling model is developed for SMD of the aftershock motion in several narrow frequency-bands. The model is developed for the larger-aftershock motions and it is shown that a reasonable replacement of such a model may be obtainable directly from an unconditional model. Finally, a simple weighted averaging scheme is proposed to obtain the composite SMD from the SMDs for different frequency bands by using the pseudo spectral acceleration spectrum of the motion.     

Crustal Growth by Magmatic Accretion Constrained by Metamorphic P-T Paths and Thermal Models of the Kohistan Arc, NW Himalayas

Magmatic accretion is potentially an important mechanism inthe growth of the continental crust and the formation of granulites.In this study, the thermal evolution of a magmatic arc in responseto magmatic accretion is modeled using numerical solutions ofthe one-dimensional heat conduction equation. The initial andboundary conditions used in the model are constrained by geologicalobservations made in the Kohistan area, NW Himalayas. Takingconsideration of the preferred intrusion locations for basalticmagmas, we consider two plausible modes of magmatic accretion:the first involves the repeated intrusion of basalt at mid-crustaldepths (‘intraplate model’), and the second evaluatesthe simultaneous intrusion of basalt and picrite at mid-crustaldepths and the base of the crust respectively (‘double-platemodel’). The results of the double-plate model accountfor both the inferred metamorphic P–T paths of the Kohistanmafic granulites and the continental geotherm determined frompeak P–T conditions observed for granulite terranes. Thedouble-plate model may be applicable as a key growth processfor the production of thick mafic lower crust in magmatic arcs. KEY WORDS: thermal model; magmatic underplating; P–T path; granulite; lower crust     

用CAPPI和PPI资料测定区域降水量精度比较

应用上海中心气象台７１４数字化天气雷达的体积扫描资料所得的不同高度上的ＣＡＰＰＩ资料和低仰角时ＰＰＩ资料。估算区域降水量并得到降水量分布形势。然后采用平均校准法进行了校准，最后又与用雨量计网测量的区域降水量及其分布形势作了比较，得到一些有意义的结果。     

基于地质记录用时域组合模型预测气候变化趋势的初步研究

用时域分析组合模型建立了１００万年来６０°Ｎ６月份太阳辐射量时间序列、宝鸡黄土粒度时间序列、渭南夏季风指数时间序列的动态模型．研究结果表明,时域分析组合模型较好地提取了时间序列的信息,得到的几个显著周期Ｔ＝１３３,１００,８９,４１,２３,１９ｋａ,与地球轨道三要素的变化周期接近．用组合模型拟合实测数据,精度是高的;用其预测未来气候替代性指标时间序列的变化情况,发现未来气候有向干冷方向发展的趋势．时域分析组合模型为研究气候变化趋势提供了一种定量分析、预测的方法．     

基于EM算法和单幅雷达图像阴影的控制点坡度校正

对在我国现有的条件下进行控制点坡度校正的必要性进行了阐述,并分析了EM算法。根据EM算法以及基于区域增长的余弦散射模型建立了控制点坡度校正模型,并用河北省张北地区的雷达影像进行了实验,取得了较高的精度初值。     

GPS网平差观测量选取的理论分析

由多台GPS接收机在不同时段进行静态观测而组成的观测网形,当采用高精度的科研软件与常用商用软件解算基线时,其基线向量的方差阵不同,前者的方差阵结构是完全的、严密的。同时,在进行GPS网平差时,选取GPS基线的方式及数量的不同,构造的网形也就不同,采用不同的数学模型其得到的平差结果和精度指标也不相同。文章先从理论上进行分析,后用示例进行比较论证。     

基于B/S的土地利用总体规划信息系统研究

探讨建立基于B/S(浏览器/服务器)模式的土地利用总体规划信息系统。对系统的功能和系统实现的几个关键技术进行了详细说明,包括数据库连接技术、MSchart控件的使用、SQL语句查询的算法设计。此系统是一种基于Internet技术的信息系统[3],用户可以通过浏览器来浏览和查询网络上的土地信息。     

基于二维直接线性变换的数字相机畸变模型的建立

提出并论证了基于二维直接线性变换的畸变的校正方法。本方法特别适用于各类固态摄像机(CCD、CID、PSD)的畸变模型的建立,以补偿各类像点系统误差。     

用L-曲线法确定半参数模型中的平滑因子

提出了一种新的方法——L-曲线法确定平滑因子。通过确定合适的平滑因子，更好地控制了残差部分V^TPV与光滑度部分S^TRS之间的平衡，得到了更准确的参数估值。通过算例，将基于L-曲线法确定平滑因子的半参数模型解算方法和其他方法进行了比较。结果表明，用L-曲线法确定平滑因子后，提高了半参数模型计算结果的精度，可以更好地将观测值中的系统误差分离出来。     

基于三层C/S模式的测量在线数据处理服务

讨论了测量数据处理软件的在线实现问题;并基于三层C/S模式,探讨了从客户端、中间层到后端数据处理模块的实现方法;最后以三角网平差作为实例,详细说明了用.Java语言实现一个网上测量在线数据处理服务系统的全过程.