无机盐类对天然矿物低温催化混合酯生烃反应的影响

脂肪酸酯是一类重要的生烃母质。选择了十四烷酸甲酯、十六烷酸甲酯和十八烷酸甲酯的混合酯为模型反应物,以方解石、白云石、伊利石、钙蒙脱石和黄铁矿为催化剂,分别考察了氯化钾、氯化镁、氯化钠、硫酸钠以及混合盐对天然矿物低温催化混合酯生烃反应的影响。结果表明,无机盐类对矿物催化下混合酯的生烃反应均有不同程度的影响,硫酸钠具有反催化作用,其它盐类具有正催化作用。且在各无机盐存在下,不同的矿物表现出不同的催化活性。     

甘肃省地震局高性能计算系统

高性能计算是现代科学研究、工程技术开发和大规模数据处理的关键支撑技术,在地震系统发挥着日益重要的作用。甘肃省地震局高性能计算集群系统由60个节点、采用40 GB InfiniBand网络互连组成,峰值计算速度达9.2万亿次/秒。作为地震系统重要的科技服务平台之一,为地震反演、数据分析、数值模拟等领域以及科研创新平台提供高性能计算环境。     

利用SEM照片获取土的孔隙结构参数

以土工实验和计算机图像处理技术为基础, 探讨利用SEM照片获取土的孔隙结构参数的方法, 并以重塑粘性土为例进行实证分析.为获取孔隙结构参数, 首先分3个步骤对土样的SEM照片进行图像处理: 即照片格式转换、颗粒边际线探测和颜色充填; 然后针对黑白二元图像测算孔隙结构参数.从设计制备的重塑粘性土的三轴试验样品中, 选择了12个不同水分状态和密度状态的样品, 经风干和烘干后, 进行SEM测试, 每个样品拍摄了3个尺度的SEM照片, 放大倍数依次为500倍、1000倍、2000倍.之后, 对所获得的SEM照片进行了图像处理分析, 计算了相应的平面孔隙比和平面孔隙率.数据分析表明: SEM照片测算的孔隙参数与通常三相图计算的孔隙参数有关联, 测算数据可以反映土的孔隙结构特征; 样品的不同脱水方式对SEM照片测算的孔隙参数有影响, 与三相图法计算数据相比, 风干土样测算的数据略有偏大, 烘干土样测算的数据偏小; 同一土样不同比例尺的SEM照片测算出的孔隙参数有所不同, 邻近三相图法计算结果上下波动; 利用SEM照片提取土的结构信息是可行的, 对SEM照片进行图像处理分析是获取土的孔隙结构参数的有效办法.      

松辽盆地北部三分量地震勘探方法及效果

松辽盆地北部三分量地震勘探的主要任务是检测天然气的分布范围,预测岩性油气藏。三分量地震勘探的最大难点是采集上压制随机干扰,处理上去除转换波剖面上同相轴的人为的直立错断（由于通常处理软件不佳引起）。着重介绍了三分量地震勘探的采集原理和处理方法。本次试验取得了良好的三分量剖面。     

GEOGRAPHY AND THE LESSONS FROM EL NIÑO∗

Recognized for years as a major environmental disruption, El Niño generated intense public interest in 1982–1983. During its last occurrence, this phenomenon, which develops in the tropical Pacific and usually affects rimlands of the Pacific basin, exceeded its boundaries and its effects were transmitted to continental North America, Europe, Africa and East Asia. Notwithstanding its vast areal extent, the interest of geographers in El Niño events, past and recent, has been comparatively less than that demonstrated by natural scientists and ecologists: little has been accomplished to place these climatic-ecological crises within global perspective. Lessons from El Niño include the acknowledgement of new concepts of climatic transitivity, ocean dynamics and energy exchanges that must find a place within the conceptual wealth of geography if this science intends to keep up with the rapid progress of other geosciences.     

下扬子复杂构造区超高压含气层的发现及油气富集关键要素

下扬子地区的构造复杂性使该地区油气勘探存在极大的难度和风险,如何在复杂构造区取得油气勘探突破是近年关注的焦点。2019年皖为页1井在下扬子无为凹陷三叠系周冲村组首次发现2套异常高压含天然气层,最高地层压力系数达1.9,取得下扬子油气调查的重大突破性进展,为下扬子油气勘探困局打开了一扇窗口。基于该超压含气层的新发现,综合研究表明,无为凹陷天然气富存得益于4个关键控制要素的有机组合：①深层稳定基底;②对冲过渡带原地体;③深水裂陷黑色页岩有利相带;④多套膏盐有利封盖等。为无为凹陷提供了稳定构造背景、良好构造保存、有利烃源岩及优质盖层等条件。上述地质要素同样有利于该凹陷二叠系页岩气富集,由此提出了构造复杂区三叠系常规天然气与二叠系页岩气一井双探的新思路。上述关键4个要素在下扬子区域上的配置关系显示,望江凹陷与无为凹陷具有相似的地质条件,是下一步油气勘探的首选有利区。     

南海海底地震仪异常数据的分析和处理

海底地震仪(Ocean Bottom Seismometer, OBS)数据处理至关重要,是获取深部地壳结构的基础与前提.2006年实施OBS2006-2测线时,有2台OBS(OBS03,OBS06)数据出现异常,无法使用.由于海上航次花费巨大,采集到的数据弥足珍贵.本文采用数据格式检查、邻近台站对比分析、重采样等方法,成功地对这2台OBS数据进行了解编处理,得到了这两个台站的综合地震记录剖面;利用上述方法对2011年实施的OBS973-3测线中的异常台站OBS03进行了分析处理,同样得到了OBS03台站的综合地震剖面;通过查看两次海上实验班报发现,OBS2006-2测线之OBS06与OBS973-3测线之OBS03内部Sedis编号相同,为同一台记录仪器,再一次验证上述处理方法正确可行;然后对OBS2006-2测线2个台站进行震相识别与走时拾取后,利用前人纵波速度模型开展了射线追踪与走时模拟.此次对异常OBS数据的重新处理工作,不仅为OBS探测提供了宝贵的数据处理经验,而且将提高OBS2006-2测线地壳结构的可靠性和约束性,具有重要的研究意义.     

天然水体中汞形态分析

简要归纳了天然水体中汞形态分析的分离(萃取、吸附、电化学分离、色谱)及检测技术(分光光度法、原子光谱法、质谱法、电化学分析法),指出了未来针对痕量超痕量汞形态分析新技术主要集中在样品前处理和便携式在线现场分析,着重推荐高效、经济并具有广阔应用前景的液相色谱-氢化物发生原子荧光光谱( LC - HG - AFS)用于痕量超痕量汞形态分析.     

Analysis of the contributions of topographic,soil, and vegetation features on the spatial distributions of surface soil moisture in a steep natural forested headwater catchment

Surface soil moisture has been extensively studied for various land uses and landforms. Although many studies have reported potential factors that control surface soil moisture over space or time, the findings have not always been consistent, indicating a need for identification of the main factors. This study focused on the static controls of topographic, soil, and vegetation features on surface soil moisture in a steep natural forested headwater catchment consisting of three hillslope units of a gully area, side slope, and valley‐head slope. Using a simple correlation analysis to investigate the effects of the static factors on surface soil moisture at depths of 0–20 cm at 470 points in 13 surveys, we addressed the characteristics of surface soil moisture and its main controlling factors. The results indicated that the mean of surface soil moisture was in the decreasing order of gully area > valley‐head slope > side slope. The relationship between the mean and standard deviation of surface soil moisture showed a convex‐upward shape in the headwater catchment, a negative curvilinear shape in the gully area, and positive curvilinear shapes at the side and valley‐head slopes. At the headwater catchment and valley‐head slope, positive contributions of soil porosity and negative contributions of slope gradient and saturated hydraulic conductivity were the main controlling factors of surface soil moisture under wetter conditions, whereas positive contributions of topographic wetness index and negative contributions of vegetation density were the main controlling factors of surface soil moisture under drier conditions. At the side slope underlain by fractured bedrocks, only saturated hydraulic conductivity and vegetation density were observed to be the controlling factors. Surface soil moisture in the gully area was mainly affected by runoff rather than were static features. Thus, using hillslope units is effective for approximately estimating the hydrological behaviours of surface moisture on a larger scale, whereas dependency between the main static factors and moisture conditions is helpful for estimating the spatial distributions of surface moisture on a smaller scale.