GIS支持下的煤层气目标区模糊综合评价模型

地理信息系统(GIS)以空间数据库技术为核心,将空间要素与统计数据有机地结合在一起,具有直观灵活、分析功能强大、制表制图方便等优点。根据中国煤层气(CBM)目标区的特点,建立了4种原则下用于不同情形的煤层气目标区评价模型:第1种模型为全面考虑各个因素原则,第2种模型为只考虑重点因素原则,第3种模型为着重考虑重点因素原则,第4种模型为既全面考虑又兼顾重点因素原则。根据这4种模型,在常用GIS软件MapGIS基础上进行了二次开发并实现模型,以华北聚气区煤层气为例进行综合评价,目标区评价结果与实际情况基本相符。     

基于已知钻孔的场地类别模糊等值线的建立

对照现行《建筑抗震设计规范》（GB50011-2001）场地类别划分方法,应用模糊数学原理,推导了场地类别的模糊二次评价方法,得出了场地类别的模糊向量和模糊特征周期,实现了场地类别划分的连续化;在此基础上,基于收集到的杭州市254个建筑场地波速钻孔实测资料,通过建立场地类别地质模型,实现了场地类别、特征周期的模糊等值线,与实测资料对比,结果表明：由该模糊等值线得出的建筑场地抗震类别与现行《建筑抗震设计规范》给出的场地类别是统一的,模糊特征周期与规范给出的特征周期基本上是吻合的,该模糊等值线对建筑抗震设计具有指导意义。     

苏里格气田盒8气藏气水层测井识别研究

鄂尔多斯盆地苏里格气田盒8气藏为弹性驱动的河流相低效气藏,储层非均质性强,在开发中普遍见水。根据试采情况将气藏储层分为气层、水层、气水层三类,开展气、水层的测井识别研究。以区内26口井50个射孔层段各层的试油结果作为依据,选出了700个样本点作为判识建模的标本,以声波时差和中子孔隙度等8个原始测井值作为判识变量组合,采用模糊判别分析,建立了各层的判识模型。回判结果表明,模型对气层精度达到97％,水层为89％,气水层为94％。利用未参加建模的出水井射孔段对模型进行验证,判识结果基本符合实际情况,模型具有较高精度。     

Intrinsic sample methods for mineral exploration and resource assessment

We report on an objective methodology, referred to as intrinsic sample methodology, for the delineation of exploration target areas or resource areas for assessment. Important features of the methodology include (1) identification of recognition criteria for critical genetic factors, (2) synthesis of new variables from enhanced geodata, (3) estimation of logit probability models, and (4) cutting of estimated logit probabilities to delineate exploration targets or resource areas. The methodology is demonstrated on the Walker Lake quadrangle of Nevada and California.     

Kriging with imprecise (fuzzy) variograms. I: Theory

Imprecise variogram parameters are modeled with fuzzy set theory. The fit of a variogram model to experimental variograms is often subjective. The accuracy of the fit is modeled with imprecise variogram parameters. Measurement data often are insufficient to create good experimental variograms. In this case, prior knowledge and experience can contribute to determination of the variogram model parameters. A methodology for kriging with imprecise variogram parameters is developed. Both kriged values and estimation variances are calculated as fuzzy numbers and characterized by their membership functions. Besides estimation variance, the membership functions are used to create another uncertainty measure. This measure depends on both homogeneity and configuration of the data.     

Effect of some additives on synthesis of zeolite from coal fly ash

Hydrothermal conversion of fly ash into zeolites was conducted and the effects of the addition of sodium halide and waste solutions produced after zeolitization of fly ash, as well as the adjustment of the Si/Al ratio prior to synthesis process on the formation and cation exchange capacity (CEC) of zeolite product were evaluated. Both the addition of NaCl and NaF ameliorated the crystallinity and CEC of synthesized zeolite, but NaF had a better improvement effect. Na⁺ was considered to enhance the crystallization of zeolite, while F⁻ favored the dissolution of fly ash. The type of zeolite formed depended on the Si/Al ratio of the starting material prior to the nucleation and crystallization of zeolite. The adjustment of the Si/Al ratio of fly ash by addition of Na₂SiO₄ and Al(OH)₃ changed the type and CEC of zeolite. Waste solutions contained large amount of Si and little Al due to the formation of a zeolite named NaP1 in zeolite terminology with the Joint Committee of Powder Diffraction Standard (JCPDS) code of 39-0219. The alkalinity decreased largely. As a result, the CEC value of zeolite products synthesized with waste solution as alkali source decreased. The supplementation of new alkali to adjust the alkalinity of waste solution could enhance the CEC of synthesized product. It was concluded that: (1) addition of sodium halide and adjustment of the Si/Al ratio prior to synthesis can improve the quality of zeolite; (2) waste solutions produced following the zeolitization of fly ash can be reused as an alkali source in the activation of fly ash; zero-emission of waste solution in the synthesis of zeolite from fly ash is possible.     

A reassessment of models for hydrocarbon generation in the Khibiny nepheline syenite complex, Kola Peninsula, Russia

Although hydrocarbon-bearing fluids have been known from the alkaline igneous rocks of the Khibiny intrusion for many years, their origin remains enigmatic. A recently proposed model of post-magmatic hydrocarbon (HC) generation through Fischer-Tropsch (FT) type reactions suggests the hydration of Fe-bearing phases and release of H₂ which reacts with magmatically derived CO₂ to form CH₄ and higher HCs. However, new petrographic, microthermometric, laser Raman, bulk gas and isotope data are presented and discussed in the context of previously published work in order to reassess models of HC generation. The gas phase is dominated by CH₄ with only minor proportions of higher hydrocarbons. No remnants of the proposed primary CO₂-rich fluid are found in the complex. The majority of the fluid inclusions are of secondary nature and trapped in healed microfractures. This indicates a high fluid flux after magma crystallisation. Entrapment conditions for fluid inclusions are 450–550 °C at 2.8–4.5 kbar. These temperatures are too high for hydrocarbon gas generation through the FT reaction. Chemical analyses of rims of Fe-rich phases suggest that they are not the result of alteration but instead represent changes in magma composition during crystallisation. Furthermore, there is no clear relationship between the presence of Fe-rich minerals and the abundance of fluid inclusion planes (FIPs) as reported elsewhere. δ¹³C values for methane range from − 22.4‰ to − 5.4‰, confirming a largely abiogenic origin for the gas. The presence of primary CH₄-dominated fluid inclusions and melt inclusions, which contain a methane-rich gas phase, indicates a magmatic origin of the HCs. An increase in methane content, together with a decrease in δ¹³C isotope values towards the intrusion margin suggests that magmatically derived abiogenic hydrocarbons may have mixed with biogenic hydrocarbons derived from the surrounding country rocks.     

模糊理论在公路边坡稳定性分析中的应用

边坡工程是一个复杂的系统工程。边坡的稳定与否直接关系到其防护工作的程度。因此,如何有效、合理地判断边坡的稳定性对整个工程的经济与社会效益极为重要。影响边坡稳定的因素众多,判断其稳定与否应考虑各因素的综合效果。论文运用模糊理论中的多因素综合评判模型对某高速公路边坡的稳定性进行研究。通过全面考虑影响因素,建立相应的评判因素集及单因素评判矩阵,运用专家评判法和判断矩阵法确定出各因素的权重。最后通过多层次模糊评判得到该边坡的稳定性评判结果。研究证明,该法在边坡稳定性分析评判中是切实可行的。     

矢量数字地图数据质量的综合评估

研究和确定了矢量数字地图数据的质量评估因子和评估标准,介绍了利用模糊综合评估方法进行质量评估的过程和做法,并给出了实例.     

基于模糊识别的水资源承载能力综合评价

应用模糊识别模型解决水资源承载能力综合评价问题,根据水资源承载能力相关因子自身的数据结构特性,通过模糊识别模型得到样本的级别特征值,从而达到对待评价区域的识别、归类,同时可以得到各相关因子在评价过程中的贡献率,实例部分将模型应用于全国30个省市、自治区的水资源承载能力评价,结果表明该方法的实用性和客观性。