Effects of spatially structured vegetation patterns on hillslope erosion in a semiarid Mediterranean environment: a simulation study

A general trend of decreasing soil loss rates with increasing vegetation cover fraction is widely accepted. Field observations and experimental work, however, show that the form of the cover‐erosion function can vary considerably, in particular for low cover conditions that prevail on arid and semiarid hillslopes. In this paper the structured spatial distribution of the vegetation cover and associated soil attributes is proposed as one of the possible causes of variation in cover–erosion relationships, in particular in dryland environments where patchy vegetation covers are common. A simulation approach was used to test the hypothesis that hillslope discharge and soil loss could be affected by variation in the spatial correlation structure of coupled vegetation cover and soil patterns alone. The Limburg Soil Erosion Model (LISEM) was parameterized and verified for a small catchment with discontinuous vegetation cover at Rambla Honda, SE Spain. Using the same parameter sets LISEM was subsequently used to simulate water and sediment fluxes on 1 ha hypothetical hillslopes with simulated spatial distributions of vegetation and soil parameters. Storms of constant rainfall intensity in the range of 30–70 mm h^?1 and 10–30 min duration were applied. To quantify the effect of the spatial correlation structure of the vegetation and soil patterns, predicted discharge and soil loss rates from hillslopes with spatially structured distributions of vegetation and soil parameters were compared with those from hillslopes with spatially uniform distributions. The results showed that the spatial organization of bare and vegetated surfaces alone can have a substantial impact on predicted storm discharge and erosion. In general, water and sediment yields from hillslopes with spatially structured distributions of vegetation and soil parameters were greater than from identical hillslopes with spatially uniform distributions. Within a storm the effect of spatially structured vegetation and soil patterns was observed to be highly dynamic, and to depend on rainfall intensity and slope gradient. Copyright © 2005 John Wiley & Sons, Ltd.     

The role of the seismic trigger in the Calitri landslide (Italy): historical reconstruction and dynamic analysis

The study covered by this paper was focused on the historical case of the Calitri landslide, which was repeatedly reactivated by earthquakes, as reported since 1694. The town of Calitri (Southern Italy) is located on a ridge whose southern slope, from its top to the Ofanto river valley floor, has been historically affected by major landsliding. The last record of recurrence of the Calitri landslide leads back to the 1980 Irpinia earthquake, which caused significant damage to the town and had pervasive and visible ground effects. Based on a detailed historical reconstruction of landsliding and seismicity at Calitri, the study analysed the current static and dynamic stability of the landsliding slope by means of a finite-difference numerical analysis, taking into account the various factors of landslide initiation and kinematics. The results of the numerical analysis: (i) were consistent with the roto-translational mechanism observed upon the latest reactivation of the landslide; (ii) demonstrated that excess pore pressure redistribution caused a lag between the seismic trigger and the initiation of landsliding; and (iii) showed the impact of seismic input frequency on propagation and depth of slope instability.     

Western Alpine back-thrusting as subsidence mechanism in the Tertiary Piedmont Basin (Western Po Plain, NW Italy)

Basin formation dynamics of the Tertiary Piedmont Basin (TPB) are here investigated by means of cross-section numerical modelling. Previous works hypothesised that basin subsidence occurred due first to extension (Oligocene) and then to subsequent loading due to back-thrusting (Miocene). However, structural evidence shows that the TPB was mainly under contraction from Oligocene until post Pliocene time while extension played a minor role. Furthermore, thermal indicators strongly call for a cold (flexure-induced) mechanism but are strictly inconsistent with a hot (thermally induced) mechanism. Our new modelling shows that the TPB stratigraphic features can be reproduced by flexure of a visco-elastic plate loaded by back-thrusts active in the Western Alps in Oligo-Miocene times. Far-field compression contributed to the TPB subsidence and controlled the basin infill geometry by enhancing basin tilting, forebulge uplift and erosion of the southern margin of the basin. These results suggest that the TPB subsidence is the result of a combination of mechanisms including thrust loading and far-field compressional stresses.     

A 2D finite volume model for bebris flow and its application to events occurred in the Eastern Pyrenees

FLATModel is a 2D finite volume code that contains several original approaches to improve debris-flow simulation. Firstly, FLATModel incorporates a ＂stop-and-go＂ technique in each cell to allow continuous collapses and remobilizations of the debris-flow mass. Secondly, flow velocity and consequently yield stress is directly associated with the type of rheology to improve boundary accuracy. Thirdly, a simple approach for entrainment is also included in the model to analyse the effect of basal erosion of debris flows. FLATMODEL was tested at several events that occurred in the Eastern Pyrenees and simulation results indicated that the model can represent rather well the different characteristics observed in the field.     

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.     

Copper demand,supply, and associated energy use to 2050

To a set of well-regarded international scenarios (UNEP’s GEO-4), we have added consideration of the demand, supply, and energy implications related to copper production and use over the period 2010–2050. To our knowledge, these are the first comprehensive metal supply and demand scenarios to be developed. We find that copper demand increases by between 275 and 350% by 2050, depending on the scenario. The scenario with the highest prospective demand is not Market First (a “business as usual” vision), but Equitability First, a scenario of transition to a world of more equitable values and institutions. These copper demands exceed projected copper mineral resources by mid-century and thereafter. Energy demand for copper production also demonstrates strong increases, rising to as much as 2.4% of projected 2050 overall global energy demand. We investigate possible policy responses to these results, concluding that improving the efficiency of the copper cycle and encouraging the development of copper-free energy distribution on the demand side, and improving copper recycling rates on the supply side are the most promising of the possible options. Improving energy efficiency in primary copper production would lead to a reduction in the energy demand by 0.5% of projected 2050 overall global energy demand. In addition, encouraging the shift towards renewable technologies is important to minimize the impacts associated with copper production.     

面向矿床三维动态建模的地质勘探数据库增量更新方法

针对深部找矿过程中地质勘探数据增加和动态三维地质建模需要,提出了一种基于版本管理的矿床地质勘探数据库增量更新方法。在分析矿床地质勘探工程数据与三维地质模型映射关系的基础上,建立时序版本和建模版本作为矿床勘探数据增量更新版本标识。针对矿床地质勘探数据库增量更新的版本管理,提出了一种扩展的有向无环图版本管理模型,设计了基于关系数据库的版本管理方法并探讨了其实现过程。以安徽铜陵凤凰山矿床地质勘探数据为例,基于SQL Server数据库系统建立了实例矿床地质勘探版本数据库,以C#编程实现了实例矿床勘探数据库的版本管理,包括版本的建立、查询与显示等功能,通过勘探工程增量更新版本数据建立了三维矿体的动态修正模型,证实了方法的可行性与有效性。     

ESTIMATING RATES OF DENUDATION USING COSMOGENIC ISOTOPE ABUNDANCES IN SEDIMENT

We propose, as a testable hypothesis, a basin-scale approach for interpreting the abundance of in situ produced cosmogenic isotopes, an approach which considers explicitly both the isotope and sediment flux through a drainage basin. Unlike most existing models, which are appropriate for evaluating in situproduced cosmogenic isotope abundance at discrete points on Earth's surface, our model is designed for interpreting isotope abundance in sediment. Because sediment is a mixture of materials, in favourable cases derived from throughout a drainage basin, we suggest that measured isotope abundances may reflect spatially averaged rates of erosion. We investigate the assumptions and behaviour of our model and conclude that it could provide geomorphologists with a relatively simple means by which to constrain the rate of landscape evolution if a basin is in isotopic steady state and if sampled sediments are well mixed.