Dynamik der Schilfröhrichte am Bodensee unter dem Einfluss von Wasserstandsvariationen

On the basis of different sets of aerial photos the dynamics of the reed bed areas of Lake Constance were investigated in relation to the dynamics of the water levels. The objectives of the study were to quantify the changes of reed areas due to different flood events in the last decades and their recovery in the time periods between these events. The results should given information of the relevance of water level variations on reed bed dynamics and the regeneration times of reed beds after extreme disturbance events.Following the extreme flood at Lake Constance in 1999 the reed belts of Lake Constance lost approximately 30 ha (24%) of the lakeside reed beds. The loss is comparable to the situation in the late 1960s, when approximately 40 ha died back due to the extreme flood in 1965 and the high spring water levels in the subsequent years. In the time period between the extreme floods of 1965 and 1999, the reed areas expanded to nearly 85% of the area before 1965. The expansion rates increased with increasing distance to the flood event of 1965. Especially in periods with series of years of low spring water level the expansion rates were high.The damage degrees of the reed areas in the years 2000 and 2002 showed a clear relation to the elevation (i.e. average water level) of the stands. The damage degree increased with decreasing elevation. Furthermore the regeneration process of severely damaged stands was related to the elevation level of the stands. Whereas stands at high elevation regenerate fast, those at low elevation died off completely in the years after the extreme flood. This supports the hypothesis that the water level flutuations play a major role in the reed dynamics of Lake Constance.As a consequence of the climate change an increase in the frequency of high spring water levels is expected. Thus, it seems unlikely that reed stands will ever expand again to the same area as before 1965.     

Method of high-density seismic imaging ex-ploration and application samples

Introduction Now, shallow seismic reflection wave technique has been used extensively in geological ex-plorations of bridge, dam, high building and so on. Since shallow seismic reflection wave tech-nique is often implemented in industrial zone or city with dense population, the background dis-turbance including industrial noise, life noise, etc is very serious. Furthermore, the disturbance of seismic source is also serious due to short array length and offset of the method. In general, shal-lo…     

Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.     

BECAPEX科学试验城市建筑群落边界层大气环境特征及其影响

20 0 1～ 2 0 0 3年在北京实施了大气边界层动力、热力、化学综合观测试验 (BECAPEX ,BeijingCityAtmosphericPollutionObservationFieldExperiment) ,获取了北京城市大气动力和大气化学三维结构图像。综合观测试验分析研究发现 ,城市区域呈非均匀次生尺度热岛分布 ,并伴随着城市次生尺度环流 ,影响了局地空气污染物分布特征。MODIS卫星遥感 地面观测资料经过变分分析 ,可发现北京城市空气污染与周边区域影响源有密切关系 ,并影响城市群落环境气候特征 ,导致该区域日照、雾日、低云量和能见度呈显著年代际变化趋势。     

Assessing land use/cover changes: a nationwide multidate spatial database for Mexico

A nationwide multidate GIS database was generated in order to carry out the quantification and spatial characterization of land use/cover changes (LUCC) in Mexico. Existing cartography on land use/cover at a 1:250,000 scale was revised to select compatible inputs regarding the scale, the classification scheme and the mapping method. Digital maps from three different dates (the late 1970s, 1993 and 2000) were revised, evaluated, corrected and integrated into a GIS database. In order to improve the reliability of the database, an attempt was made to assess the accuracy of the digitalisation procedure and to detect and correct unlikely changes due to thematic errors in the maps. Digital maps were overlaid in order to generate LUCC maps, transition matrices and to calculate rates of conversion. Based upon this database, rates of deforestation between 1976 and 2000 were evaluated as 0.25 and 0.76% per year for temperate and tropical forests, respectively.     

Accuracy analysis, dem generation and validation using russian tk-350 stereo-images

TK-350 stereo-scenes of the Zonguldak testfield in the north-west of Turkey have been analysed. The imagery had a base-to-height ratio of 0·52 and covered an area of 200 km × 300 km, with each pixel representing 10 m on the ground. Control points digitised from 1:25 000 scale topographic maps were used in the test. A bundle orientation was executed using the University of Hanover program BLUH and PCI Geomatica OrthoEngine AE software packages. Tests revealed that TK-350 stereo-images can yield 3D geopositioning to an accuracy of about 10 m in planimetry and 17 m in height. A 40 m resolution digital elevation model (DEM) was generated by the PCI system and compared against a reference DEM, which was derived from digitised contour lines provided by 1:25 000 scale topographic maps. This comparison showed that accuracy depends mainly on the surface structure and the slope of the local terrain. Root mean square errors in height were found to be about 27 and 39 m outside and inside forested areas, respectively. The matched DEM demonstrated a systematic shift against the reference DEM visible as an asymmetric shift in the frequency distribution. This is perhaps caused by the presence of vegetation and buildings.     

Analytical methods Of assessing the image quality associated with digital and photographic imaging systems

The introduction of digital cameras for aerial survey photography and use of scanners with processed aerial film present a number of technical questions concerning the way photography is to be acquired in the future. Among the questions to be addressed are the comparative metric properties of images acquired by each system and the associated image quality characteristics. The new digital camera systems will require very careful appraisal, using well-established methods of assessing metric quality already available to survey organisations. The questions concerning image quality are more difficult to answer, as they require very specialised instrumentation if measurements are to be made directly in practice. Over the course of the past several decades a more analytical approach to assessing image quality has emerged, and one that may be used by individuals. The method is particularly effective where information on the micro-image characteristics of products is made available by the manufacturers concerned. An outline is given of some considerations that need to be taken into account when using an analytical approach, with references given for further reading.     

基于RS和GIS的松花江流域(吉林省段)水资源网络化管理技术研究

松花江流域(吉林省段)水资源网络化管理系统既是一个基于3S技术和网络技术集成的空间决策支持系统，也是一个综合性管理信息系统。它的三维环境可视化功能可显示河流地形和走向，公共信息交互式操作能方便用户查询各种空间信息和数据，网络化管理职能为水资源管理部门对水环境污染、水资源合理利用的预测和决策提供了参考。本文对这项网络化管理信息系统的技术方案和运行步骤进行了探讨。     

开发MapObjects为城市绿地管理服务

从控件技术出发，介绍了对象链接与嵌入技术—Activex控件技术，并将GIS控件MapObjects应用到长春市城市绿地管理领域中。开发出的长春市城区绿地地理信息系统具有地图管理和信息查询及修改功能，实现了地图的放大、缩小、平移以及由空间查属性和由属性查空间的双向查询功能，并以多媒体形式展示长春市绿化情况，为长春市实现科学管理绿地提供了技术支撑工具。     

采用DPIV技术研究浅水平板岛屿尾流

人们对于尾流的研究大都针对绕流体在展向非常长的情形,但是在天然环境和水利工程中出现的多为水深相对很浅的流动。由于槽底和自由水面的限制,浅水域中的尾流有着与深水尾流不同的流动规律。采用数字粒子图像测速(DPIV)技术,在长30m、宽3.5m、高1m的水槽中比较系统地量测了浅水中绕平板岛屿的尾流区流场。分析了大尺度旋涡的运动规律,得到了尾流流动形式随尾流稳定性参数的变化规律。目前如此大尺度浅水岛屿尾流的定量实验研究并不多见。