基于高分辨率风场的海洋近惯性能通量计算——时空特征及其影响因素

基于高分辨率CFSR(climate forecast system reanalysis)风场资料、气候态海洋混合层厚度资料和卫星高度计海面高度异常资料,本文估计了大气风场向全球海洋混合层的近惯性能通量和近惯性能量输入功率,并探究了混合层厚度、风场时间分辨率、经验衰减系数和中尺度涡旋涡度对近惯性能通量和能量输入功率的影响。浮标实测风场和流速表明,本文所用的风场和阻尼平板模型可用于估计风场向全球海洋的近惯性能通量。本文计算得到的大气向全球海洋输入近惯性能量的功率为0.56TW(1TW=10~(12)W),其中北半球贡献0.22TW,南半球贡献0.34TW。在时间上,风场的近惯性能通量呈现各个半球冬季最强、夏季最弱的特征,这和西风带风场的季节变化有关。在空间上,近惯性能通量的高值海域为南、北半球西风带海洋,尤其是南大洋。混合层厚度和风场空间不均匀性使得西风带近惯性能通量呈现纬向变化,即海盆西部强于海盆东部。风场时间分辨率对近惯性能通量的估计至关重要,低时间分辨率风场对近惯性能通量的低估达到13%—30%。阻尼平板模型中的经验衰减系数对近惯性能通量估计的影响不超过5%。中尺度涡旋涡度仅改变近惯性能通量的空间分布,而对全球近惯性能量输入功率的影响可以忽略。     

基于经验模态分解和小波分解估算海气通量涡相关计算中的截断时间尺度

基于时长38天的海表风场实测数据,应用经验模态分解(EmpiricalModeDecomposition,EMD)和小波分解(Wavelet Decomposition, WD)这两种数据处理方法首先对涡相关法中的截断时间尺度(CutoffTimescale,CTS)进行估算,结果显示:基于EMD与WD方法估算出的CTS一般都在40秒左右(EMD的结果略小),远远小于传统涡相关法中CTS的取值(固定为10分钟),且EMD和WD的使用使得每一段数据都能够根据自身的湍流特点而获得合适的CTS; EMD方法和WD方法有效的去除了计算结果中的非湍部分,且对通量传输方向的刻画也更加合理,极大提高了通量的计算精度,所得通量与传统方法计算的通量偏差平均值高达45%;研究还对EMD和WD的优缺点进行了对比分析,结果表明EMD相比于WD有更高的自主性,而WD对信号的分离程度则更高。     

Numerical modeling investigation on turbulent oscillatory flow over a plane rough bed composed by randomly arrayed particles

A three-dimensional numerical model is established to simulate the turbulent oscillatory boundary layer over a fixed and rough bed composed by randomly arrayed solid spheres based on the lattice Boltzmann method and the large eddy simulation model.The equivalent roughness height,the location of the theoretical bed and the time variation of the friction velocity are investigated using the log-fit method.The time series of turbulent intensity and Reynolds stress are also investigated.The equivalent roughness height of cases with Reynolds numbers of 1×10~4–6×10~4 is approximately 2.81 d(grain size).The time variation of the friction velocity in an oscillatory cycle exhibits sinusoidal-like behavior.The friction factor depends on the relative roughness in the rough turbulent regime,and the pattern of solid particles arrayed as the rough bed in the numerical simulations has no obvious effect on the friction factor.     

Reconstruction of eddies by assimilating satellite altimeter data into Princeton Ocean Model

An optimal interpolation assimilation model for satellite altimetry data is developed based on Princeton Ocean Model (POM), which is applied in a quasi-global domain, by the method of isotropic correlation between sea level anomaly (SLA) and sea temperature anomaly. The perfor- mance of this assimilation model is validated by the modeled results of SLA and the current patterns. Comparisons between modeling and satellite data show that both the magnitudes and distribution patterns of the simulated SLA are improved by assimilation. The most signiˉcant improvement is that meso-scale systems, e.g., eddies, are well reconstructed. The evolution of an eddy located in the northwest Paciˉc Ocean is traced by using the assimilation model. Model results show that during three months the eddy migrated southwestward for about 6 degrees before merging into the Kuroshio. The three dimensional structure of this eddy on 12 August 2001 is further analyzed. The strength of this warm, cyclonic eddy decreases with the increase of depth. The eddy shows di?erent horizontal patterns at di?erent layers, and the SLA and temperature ˉelds agree with each other well. This study suggests that this kind of data assimilation is economic and reliable for eddy reconstruction, and can be used as a promising technique in further studies of ocean eddies as well as other ˉne circulation structures.     

Impacts of New Implementing Strategies for Surface and Model Physics Perturbations in TREPS on Forecasts of Landfalling Tropical Cyclones

To improve the ensemble prediction system of the tropical regional atmosphere model for the South China Sea(TREPS) in predicting landfalling tropical cyclones(TCs), the impacts of three new implementing strategies for surface and model physics perturbations in TREPS were evaluated for 19 TCs making landfall in China during 2014–16. For sea surface temperature(SST) perturbations, spatially uncorrelated random perturbations were replaced with spatially correlated ones. The multiplier f, which is u...     

Impact of 4DVAR assimilation of rainfall data on the simulation of mesoscale precipitation systems in a mei-yu heavy rainfall event

The multi-scale weather systems associated with a mei-yu front and the corresponding heavy precipitation during a particular heavy rainfall event that occurred on 4 5 July 2003 in east China were successfully simulated through rainfall assimilation using the PSU/NCAR non-hydrostatic, mesoscale, numerical model （MM5） and its four-dimensional, variational, data assimilation （4DVAR） system. For this case, the improvement of the process via the 4DVAR rainfall assimilation into the simulation of mesoscale precipitation systems is investigated. With the rainfall assimilation, the convection is triggered at the right location and time, and the evolution and spatial distribution of the mesoscale convective systems （MCSs） are also more correctly simulated. Through the interactions between MCSs and the weather systems at different scales, including the low-level jet and mei-yu front, the simulation of the entire mei-yu weather system is significantly improved, both during the data assimilation window and the subsequent 12-h period. The results suggest that the rainfall assimilation first provides positive impact at the convective scale and the influences are then propagated upscale to the meso- and sub-synoptic scales.
Through a set of sensitive experiments designed to evaluate the impact of different initial variables on the simulation of mei-yu heavy rainfall, it was found that the moisture field and meridional wind had the strongest effect during the convection initialization stage, however, after the convection was fully triggered, all of the variables at the initial condition seemed to have comparable importance.     

Reliability of X-band Dual-polarization Phased Array Radars Through Comparison with an S-band Dual-polarization Doppler Radar

Based on the observations of a squall line on 11 May 2020 and stratiform precipitation on 6 June 2020 from two X-band dual-polarization phased array weather radars(DP-PAWRs) and an S-band dual-polarization Doppler weather radar(CINRAD/SA-D), the data reliability of DP-PAWR and its ability to detect the fine structures of mesoscale weather systems were assessed. After location matching, the observations of DP-PAWR and CINRAD/SA-D were compared in terms of reflectivity(ZH), radial velocity(V), dif...     

Can Eddy Forcing be Responsible for the Spatial Structure of the Northern Hemisphere Annular Mode?

In order to study the origin of the spatial structure of the Northern Hemisphere Annular Mode (NAM),a linear stochastic model is constructed empirically from the output of a GCM run.Optimal stochastic forcing in terms of the maximum variance contribution,which may be potentially related to the maintenance of the NAM,is investigated.Theoretical analysis on the dominant non-modal response to the stochastic forcing shows that this dominance is jointly decided by the properties of forcing and the non-modal grow...     

Seasonal evaluation of rainfall estimation by four cumulus parameterization schemes and their sensitivity analysis

Sustainable water resources management require scientifically sound information on precipitation, as it plays a key role in hydrological responses in a catchment. In recent years, mesoscale weather models in conjunction with hydrological models have gained great attention as they can provide high‐resolution downscaled weather variables. Many cumulus parameterization schemes (CPSs) have been developed and incorporated into three‐dimensional Pennsylvania State University/National Center for Atmospheric Research (PSU/NCAR) mesoscale model 5 (MM5). This study has performed a comprehensive evaluation of four CPSs (the Anthes–Kuo, Grell, Betts–Miller and Kain–Fritsch93 schemes) to identify how their inclusion influences the mesoscale model's precipitation estimation capabilities. The study has also compared these four CPSs in terms of variability in rainfall estimation at various horizontal and vertical levels. For this purpose, the MM5 was nested down to resolution of 81 km for Domain 1 (domain span 21 × 81 km) and 3 km for Domain 4 (domain span 16 × 3 km), respectively, with vertical resolutions at 23, 40 and 53 vertical levels. The study was carried out at the Brue catchment in Southwest England using both the ERA‐40 reanalysis data and the land‐based observation data. The performances of four CPs were evaluated in terms of their ability to simulate the amount of cumulative rainfall in 4 months in 1995 representing the four seasonal months, namely, January (winter), March (spring), July (summer) and October (autumn). It is observed that the Anthes–Kuo scheme has produced inferior precipitation values during spring and autumn seasons while simulations during winter and summer were consistently good. The Betts–Miller scheme has produced some reasonable results, particularly at the small‐scale domain (3 km grid size) during winter and summer. The KF2 scheme was the best scheme for the larger‐scale (81 km grid size) domain during winter season at both 23 and 53 vertical levels. This scheme tended to underestimate rainfall for other seasons including the small‐scale domain (3 km grid size) in the mesoscale. The Grell scheme was the best scheme in simulating rainfall rates, and was found to be superior to other three schemes with consistently better results in all four seasons and in different domain scales. Copyright © 2011 John Wiley & Sons, Ltd.