Snow loads on wire mesh and cable net rockfall slope protection systems

Snow load on mesh systems is complicated by many factors. This paper presents field instrumentation data on snow load variation with temperature, snowfall and snow depth on a mesh system. It was found that snow load pattern on mesh systems changed with temperature even without variation in snow depth. It reached its maximum value when the temperature rose just above freezing to melt the interface. The field data was used to formulate appropriate snow load models for the various conditions of temperature in the field. The snow load models were used to study the performance of a number of mesh systems in North America and estimate the interface friction that was prevalent for the different surface conditions.     

体绘制技术在地学3D GIS 可视化中的应用研究

体绘制技术是目前科学计算可视化研究的一个重要组成部分，对地质体内部属性分布的可视化有重要意义。该文针对地学研究中几何建模和属性建模同样重要的特点，基于一种矢栅一体化的混合数据模型，对地质体表面采用三角面片描述几何形状，对地质体内部采用基于八叉树的自适应网格剖分技术描述内部属性特征。对网格剖分后的体数据，采用体元投射的体绘制技术进行地质体内部属性可视化，显示出很好的效果，具有实际应用意义。     

An adaptive finite element model for wellbore breakout simulation

A finite element formulation is proposed and implemented for analysing the stability of excavated wells using the DiMaggio-Sandler constitutive elastoplastic model with a typical carbonate reservoir configuration. The quality of the finite element approximation is ensured by applying smooth curved elements adapted to the wellbore geometry, and h − p adaptive finite element meshes in the plastic zone. General purpose procedures are defined to transfer the elastoplastic deformation history to newly created integration points. A breakout damage criterion is proposed based on the second invariant of the deviatoric plastic deformation tensor. This damage criterion is used to apply a mesh movement algorithm to represent material collapse. The automatic successive application of the breakout damage criterion results in elliptical realistically looking geometries obtained in experiments reported in the literature.     

Diagnosing snow accumulation errors in a rain‐snow transitional environment with snow board observations

Diagnosing the source of errors in snow models requires intensive observations, a flexible model framework to test competing hypotheses, and a methodology to systematically test the dominant snow processes. We present a novel process‐based approach to diagnose model errors through an example that focuses on snow accumulation processes (precipitation partitioning, new snow density, and snow compaction). Twelve years of meteorological and snow board measurements were used to identify the main source of model error on each snow accumulation day. Results show that modeled values of new snow density were outside observational uncertainties in 52% of days available for evaluation, while precipitation partitioning and compaction were in error 45% and 16% of the time, respectively. Precipitation partitioning errors mattered more for total winter accumulation during the anomalously warm winter of 2014–2015, when a higher fraction of precipitation fell within the temperature range where partition methods had the largest error. These results demonstrate how isolating individual model processes can identify the primary source(s) of model error, which helps prioritize future research.     

From soil aggregates to riverine flocs: a laboratory experiment assessing the respective effects of soil type and flow shear stress on particles characteristics

Particles eroded from hillslopes and exported to rivers are recognized to be composite particles of high internal complexity. Their architecture and composition are known to influence their transport behaviour within the water column relative to discrete particles. To‐date, hillslope erosion studies consider aggregates to be stable once they are detached from the soil matrix. However, lowland rivers and estuaries studies often suggest that particle structure and dynamics are controlled by flocculation within the water column. In order to improve the understanding of particle dynamics along the continuum from hillslopes to the lowland river environment, soil particle behaviour was tested under controlled laboratory conditions. Seven flume erosion and deposition experiments, designed to simulate a natural erosive event, and five shear cell experiments were performed using three contrasting materials: two of them were poorly developed and as such can not be considered as soils, whilst the third one was a calcareous brown soil. These experiments revealed that soil aggregates were prone to disaggregation within the water column and that flocculation may affect their size distribution during transport. Large differences in effective particle size were found between soil types during the rising limb of the bed shear stress sequence. Indeed, at the maximum applied bed shear stress, the aggregated particles median diameter was found to be three times larger for the well‐developed soil than for the two others. Differences were smaller in the falling limb, suggesting that soil aggregates underwent structural changes. However, characterization of particles strength parameters showed that these changes did not fully turn soil aggregates into flocs, but rather into hybrid soil aggregate–floc particles. Copyright © 2013 John Wiley & Sons, Ltd.     

顾及形态特征和语义信息的双线道路识别方法

双线道路识别与提取是城市路网综合的关键。提出了一种城市双线道路提取的方法。在构建好的道路网眼的基础上,综合考虑双线道路网眼形态特征以及构成网眼路段之间的语义相似度,设计了识别双线道路网眼的综合指标。通过判断网眼综合指标确定最终的双线道路网眼,最后根据识别出的双线道路网眼提取出双线道路。实验表明,该方法能有效提取出城市道路数据中的双线道路。     

城市点云的区域生长三角网构建方法

成熟的倾斜摄影测量及密集匹配技术可获取密集的城市点云,对点云进行三角网构建是真三维建模的关键技术之一。提出了基于区域生长的三角网构建方法,使用双约束条件提高点云的搜索效率,基于点边表数据结构进行网格生长,利用夹角约束和三角形孔洞修补优化网格。实验证明,该方法获取的三角网能够准确地表达楼体、桥状建筑等在内的城市实体,网格优化后的孔洞比例约为1‰并且该方法具有一定的抗噪能力。     

Contained density currents with high volume of release

Contained density currents with high volume of release reflect against the boundaries of the reception environment commonly leading to oscillatory flow. These flows exist in sediment clarifiers, compromising their operations, and deposited signatures of contained turbidity currents are found as part of the infill of sedimentary basins; for operation of the former and interpretation of the latter it is essential to understand the dynamic processes of these flows. Six lock‐exchange experiments with different initial densities were made in a horizontal flume, where the volume of the saline mixture in the lock was equivalent to the volume of the ambient fluid. A further two tests, with a repeated initial density, were made: one with high volume of release and very long duration; and another with low volume of release. Firstly, the movement of the current is discussed, including the oscillations within the experimental tank involving the density current and an upper layer counter‐current. It is shown that the cyclic behaviour is self‐similar with the reduced gravity of the initial density in the lock. Secondly, entrainment and water mixing processes are characterized. The time evolution of mixing is characterized qualitatively by analysing the background potential energy of the density distributions to show that mixing occurs even in the earlier stages of the current, and mainly within the first cycle of the oscillation. Quantified analysis reveals that, in currents with high volume of release, entrainment discharge is one order of magnitude higher, mainly due to the larger interface between the ambient fluid and the current. A model for the evolution of the mixing process is proposed for density currents with high volume of release. Finally, the dynamics of the head of the current is analysed. The entrainment in the head, when compared to the entrainment in the remainder body of the flows, is less important for the configuration with a larger lock.