一种重磁特征线的自动提取方法

本文介绍一种最大梯度追踪和旋转变换方法，可用于重磁数字图像特征线自动提取。该方法分两步进行，首先用最大梯度追踪法产生二态像素图，然后用旋转变换方法将二态像素图的栅格特征线转换成矢量特征线。此方法生成的文件可以与ＧＩＳ接口。     

Merging of Airborne Gravity and Gravity Derived from Satellite Altimetry: Test Cases Along the Coast of Greenland

The National Survey and Cadastre - Denmark (KMS) has for several years produced gravity anomaly maps over the oceans derived from satellite altimetry. During the last four years, KMS has also conducted airborne gravity surveys along the coast of Greenland dedicated to complement the existing onshore gravity coverage and fill in new data in the very-near coastal area, where altimetry data may contain gross errors. The airborne surveys extend from the coastline to approximately 100 km offshore, along 6000 km of coastline. An adequate merging of these different data sources is important for the use of gravity data especially, when computing geoid models in coastal regions.The presence of reliable marine gravity data for independent control offers an opportunity to study procedures for the merging of airborne and satellite data around Greenland. Two different merging techniques, both based on collocation, are investigated in this paper. Collocation offers a way of combining the individual airborne gravity observation with either the residual geoid observations derived from satellite altimetry or with gravity derived from these data using the inverse Stokes method implemented by Fast Fourier Transform (FFT).     

“8.13”黄淮北部暴雨云团的组织结构和触发机制

利用FY-2E卫星资料、多普勒雷达监测及4Dvar反演资料、区域自动站和常规观测资料、NCEP分析资料,对2010年8月13日黄淮北部暴雨云团的组织结构、发展演变及形成机制进行研究。结果表明:暴雨云团形成发展于低涡切变形势下,低涡切变线、西南急流及边界层扩散南下弱冷空气是主要影响系统;高的对流不稳定能量、强的低层垂直风切变和持续发展的水汽条件是主要环境特征。不同区域云团的形成机制有差别,发展北上的西南急流促使MβCS旺盛发展。随着低涡发展,MβCS发展合并形成圆形MαCS,强暖湿气流强迫、弱冷空气扩散及地面辐合线是圆形MαCS形成发展的重要机制。γ或β中尺度气旋及辐合线在对流初生阶段起动力触发作用,辐合加强及辐合区的向后延伸导致对流云团的自身发展和后向发展;成熟阶段对流单体后部的强出流促使对流单体分裂,气旋式环流外围西南和偏南气流合并造成对流单体合并。MαCS成熟和衰亡期雷达上出现的线状对流系统具有明显强降水特征。     

Merging multi-source precipitation products or merging their simulated hydrological flows to improve streamflow simulation

Satellite and reanalysis precipitation products are widely utilized for streamflow simulation, which is one critical hydrological application, especially for ungauged regions. Possible ways to improve streamflow simulation are investigated in this study by merging multi-source precipitation products, or directly merging streamflow simulated with different precipitation products. Two satellite-based precipitation products, Tropical Rainfall Measuring Mission (3B42 Version 7) and Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks-Climate Data Record (PERSIANN-CDR), and one reanalysis precipitation product, National Centers for Environment Prediction-Climate Forecast System Reanalysis (NCEP-CFSR) are selected. Bayesian model averaging (BMA) is used to merge multi-source precipitation estimates and streamflow simulations. The results show that merging multi-source precipitation products made little difference to improve streamflow simulation. Merging multi-source streamflow simulations using the BMA generally achieved better performance on streamflow simulation, indicating that this approach is more efficient than merging multi-source precipitation products.     

基于最优插值和贝叶斯最大熵的海表温度融合方法研究

海表温度(sea surface temperature,SST)是影响全球气候的重要因素,在海洋科学研究中占有关键位置。论文基于MODIS红外、AMSR-2和HY-2A微波辐射计数据,分别利用最优插值和贝叶斯最大熵方法对SST数据进行融合,并用i Quam实测数据和Argo浮标数据对2015年SST融合数据进行检验。MODIS、AMSR-2、HY-2A辐射计SST的年平均空间覆盖率分别为15.0%,21.6%,22.0%,最优插值和贝叶斯最大熵融合SST产品的年平均空间覆盖率提高到98.6%和99.4%,融合产品空间覆盖率明显提高。与i Quam实测数据对比,最优插值和贝叶斯最大熵融合产品年平均偏差分别为0.07℃,0.04℃,均方根误差皆为0.78℃,其中3-7月最优插值融合产品的精度略优于贝叶斯最大熵融合产品,其它月份则相反;与Argo浮标数据对比,两种融合产品的均值偏差分别为0.06℃,0.01℃,均方根误差分别为0.77℃,0.75℃。整体上,贝叶斯最大熵融合产品的精度略优于最优插值融合产品,但计算成本较高。     

A Track Initiation Method for the Underwater Target Tracking Environment

A novel efficient track initiation method is proposed for the harsh underwater target tracking environment (heavy clutter and large measurement errors): track splitting, evaluating, pruning and merging method (TSEPM). Track initiation demands that the method should determine the existence and initial state of a target quickly and correctly. Heavy clutter and large measurement errors certainly pose additional difficulties and challenges, which deteriorate and complicate the track initiation in the harsh underwater target tracking environment. There are three primary shortcomings for the current track initiation methods to initialize a target: (a) they cannot eliminate the turbulences of clutter effectively; (b) there may be a high false alarm probability and low detection probability of a track; (c) they cannot estimate the initial state for a new confirmed track correctly. Based on the multiple hypotheses tracking principle and modified logic-based track initiation method, in order to increase the detection probability of a track, track splitting creates a large number of tracks which include the true track originated from the target. And in order to decrease the false alarm probability, based on the evaluation mechanism, track pruning and track merging are proposed to reduce the false tracks. TSEPM method can deal with the track initiation problems derived from heavy clutter and large measurement errors, determine the target’s existence and estimate its initial state with the least squares method. What''s more, our method is fully automatic and does not require any kind manual input for initializing and tuning any parameter. Simulation results indicate that our new method improves significantly the performance of the track initiation in the harsh underwater target tracking environment.     

局部多项式插值方法在多源海底沉积厚度数据融合中的应用

提出了在多源空间数据融合过程中出现不一致的问题;介绍了局部多项式插值方法的基本原理;通过该方法在海底沉积厚度模型构建中的成功应用,为基础数据的搜集和融合提供了新的思路.     

基于改进的区域增长算法的高分辨率影像分割

提出了一种基于区域增长的影像分割改进算法;该算法可以在区域增长的基础上进行区域合并和平滑最终改善影像分割的效果。通过实验结果显示:该算法对于高分辨率遥感影像分割效果较好。     

多源遥感影像数据融合方法在地学中的应用

应用遥感影像数据融合理论，研究了光学遥感、热红外遥感、微波遥感卫星在地质学中的应用，论述了不同类型的遥感数据及其他地学数据在不同层次上的同一传感器多波段数据融合、不同SAR图像数据融合、HIS变换、遥感影像与地球物理、地质和航磁等数据的融合。结果表明，数据融合技术在突出地质特征信息方面具有能突出线性构造、断裂构造、地形地貌的优势。     

基于索引图的大比例尺图幅自动接边方法研究

针对图幅接边中存在的问题和难点,提出了一套基于索引图多幅大比例尺地图自动接边的方法,采用了组件式编程方法,实现了简单化和自动化图幅接边的功能.