Researches on the Internal Molecular Weight Uniformity of Chitosan Biomaterials

Uniform molecular weight(Mw)chitosan(CS)is highly demanded in medical biomaterial industry.This present article described heterogeneous degradation of CS in aqueous HCl/ethanol solution,in which progress uniform Mw CS was successfully prepared.The Mw distribution of CS was measured by gel permeation chromatography(GPC)analysis.Moreover,the structure and properties of degraded CS were characterized by Fourier transform infrared spectroscopy(FT-IR),nuclear magnetic resonance spectroscopy(^1H NMR),X-ray diffraction(XRD)and thermogravimetric(TG)analysis.In addition,the biocompatibility of degraded CS was also assessed by hemolysis rate(HR)measurement.The Mw of CS dramatically decreased from 246 KDa to 76 k Da at the initial 30 min,and stabilized at 18 kDa after 24 h.GPC analysis results showed that the degraded CS molecular become homogenization.FT-IR and 1 H NMR analysis confirmed the basic structure of CS molecular backbone was not destroyed during this progress.Besides,the water solubility of CS was not significantly influenced by this reaction.Moreover,the XRD analysis revealed that crystallinity of degraded CS increased from 70.32% to 99.25%with time.The TG analysis showed improved thermal stability of degraded CS.HR measurement demonstrated the degraded CS possessed excellent biocompatibility.This simple and efficient heterogeneous degradation would open up a new route to produce uniform Mw CS.     

基于倾斜摄影测量技术的三维数字城市建模

使用较为先进的信息化手段,能够为城市的规划、建设、管理、运营以及一些应急措施的应用发挥良好作用。三维数字城市的建模,能够在很大程度上有效提高政府的实际服务和管理水平,从而有效增强城市的管理效率,为有效节约城市资源发挥重要的作用。本文主要从数字城市进行三维建模的现实状况入手,对倾斜摄影技术的内涵和技术特征进行详细分析,从而介绍基于倾斜摄影测量技术的三维数字城市建模项目的具体实施情况。     

谈大数据时代的“云控制”摄影测量

在当今大数据时代,影像数据采集方式的多样化、高效化、便捷化产生的摄影测量影像大数据需要高效、自动与智能的处理。然而,作为传统摄影测量几何定位主要控制数据的外业控制点,其获取的复杂性与低效性仍然是制约摄影测量处理效率的关键因素。针对该问题,本文提出了"云控制"摄影测量的概念,以带有地理空间信息的数据作为几何控制替代外业控制点,通过自动匹配(或配准)获取大量密集的控制信息;并介绍了基于影像、矢量和LiDAR点云的3种"云控制"摄影测量技术;最后对"云控制"摄影测量的应用前景进行了展望并对其问题进行了讨论。     

像控布设方案对无人机航测精度影响的测试

结合实际的飞行试验,采用了5种像控布设方案,对无人机数码相机影像经纠正后直接进行立体建模测图或空三加密之后进行立体测图,然后进行实地精度检核,分析各种像控布设方案对工作效率和测图精度的影响,寻找出最佳的像控布设方案,对无人机航测进行1:000大比例尺高精度测图的可行性和发展方向进行展望。     

从数字化测绘到信息化测绘的测绘学科新进展

测绘学科已完成由传统模拟测绘向数字化测绘的转变过程,现在正在向信息化测绘新阶段转化与跨越。本文综述了测绘学科及其下的五个子学科(大地测量学、摄影测量与遥感学、地图制图与地理信息工程学、工程测量学和海洋测绘学)在向信息化测绘跨越过程中的科学与技术的新进展。     

中华鳖气单胞菌疖疮病的研究

气单胞菌疖疮病是中华鳖的主要病害之一,其发病对象主要是稚鳖。将病鳖进行细菌分离,获得的菌株经人工感染、毒力测试和细菌学鉴定,确定致病菌为嗜水气单胞菌Ａｅｒｏｍｏｎａｓｈｙｄｒｏｐｈｉｌａ与豚鼠气单胞菌Ａ．ｃａｖｉａｅ。此两种致病菌不仅对健康鳖表现出较强的致病力,出现与自然病鳖相同的症状,且对健康小鼠亦有较强的致死力,半致死量ＬＤ５０分别为４．５×１０６个菌／只和１．５８×１０６个菌／只。此外,测定了病原菌对抗生素的敏感性,为科学防治提供依据。     

High resolution UAV image acquisition method and modeling practice for geological outcrop with a large slope

The observation on the outcrop in the field is one of the most direct and efficient methods to obtain the underground formation information, which provides the most direct first-hand geological data for geological science research. However, the traditional outcrop investigation, especially for the outcrop with a large slope and unreachable area, mainly relies on the inspection, measurement of the slope bottom, and photos to record outcrop information, making it difficult to accurately characterize the whole geological body. Consumer unmanned aerial vehicle (UAVs) with the advantages of good mobility, strong adaptability and low cost, can obtain outcrop images from a short distance, multiple perspectives and varying heights. In this paper, the image acquisition method and model construction accuracy without control points available for the geological outcrop with a large slope are discussed. Consumer UAVs is used to capture images through vertical route and then the geological model is set up. The results show that oblique photogrammetry technology combined with consumer UAVs can effectively build a large slope geological outcrop model with millimeter resolution. The model has the characteristics of high resolution, uniform resolution and high measurement accuracy up to millimeter, which can effectively reduce the difficulty of field investigation and the personnel safety risk, thus it accurately reproduces the outcrop situation with large slope in the field, providing a real and reliable data basis for the section interpretation, analysis and measurement of large slope outcrop.     

无人机航摄技术在大比例尺测图中的应用研究

以无人机航摄技术在大比例尺(1∶1 000、1∶500)地形图测绘中的应用为研究目的,采用固定翼无人机平台,搭载非量测型数码相机,于河北某矿区进行航摄大比例尺地形图制作实验,通过外业实测点位数据对测图高程及平面精度进行评估。实验结果表明:通过严控误差影响因素无人机航摄技术可以满足1∶1 000比例尺测图精度要求,1∶500比例尺测图精度无法满足。最后,基于精度评定数据对误差产生的原因进行了深入分析与探讨,为无人机航摄技术测绘大比例尺地形图应用的可行性及可靠性提供了经验。     

Shake table investigation on the seismic performance of hospital equipment supported on wheels/casters

This paper presents an experimental investigation on the seismic response of medical equipment supported on wheels and/or casters. Two pieces of equipment were tested: a large ultrasound machine and a cart carrying smaller medical equipment. In the first phase, the resistance of the wheels and casters of the equipment was characterized through a controlled‐displacement procedure on the shake table. In the second phase, an extensive shake table test program was carried out to investigate the seismic response of the equipment. The input signals for the shake table tests included floor motions of a four‐story steel braced‐frame hospital designed to satisfy seismic requirements of a site in the Los Angeles area. The results of 96 shake table tests reported in this study include the seismic performance of the equipment under both unlocked and locked conditions, located on various floor levels of the building. It was observed that engaging the casters' locking mechanism does not necessarily decrease the relative displacement. The displacement response was sensitive to the excitation intensity and the orientation of the equipment with respect to the input excitation. Based on the experimental observations, appropriate structural engineering demand parameters associated with the relative displacement and relative velocity demands of the equipment are proposed and used to develop conditional probability curves. Finally, in an effort to extend the results of this experimental study to similar equipment on wheels/casters, the performance of a simple numerical model in predicting the peak seismic demands is evaluated. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of Structure‐from‐Motion photogrammetry to river restoration

Structure‐from‐Motion (SfM) photogrammetry is now used widely to study a range of earth surface processes and landforms, and is fast becoming a core tool in fluvial geomorphology. SfM photogrammetry allows extraction of topographic information and orthophotos from aerial imagery. However, one field where it is not yet widely used is that of river restoration. The characterisation of physical habitat conditions pre‐ and post‐restoration is critical for assessing project success, and SfM can be used easily and effectively for this purpose. In this paper we outline a workflow model for the application of SfM photogrammetry to collect topographic data, develop surface models and assess geomorphic change resulting from river restoration actions. We illustrate the application of the model to a river restoration project in the NW of England, to show how SfM techniques have been used to assess whether the project is achieving its geomorphic objectives. We outline the details of each stage of the workflow, which extend from preliminary decision‐making related to the establishment of a ground control network, through fish‐eye lens camera testing and calibration, to final image analysis for the creation of facies maps, the extraction of point clouds, and the development of digital elevation models (DEMs) and channel roughness maps. The workflow enabled us to confidently identify geomorphic changes occurring in the river channel over time, as well as assess spatial variation in erosion and aggradation. Critical to the assessment of change was the high number of ground control points and the application of a minimum level of detection threshold used to assess uncertainties in the topographic models. We suggest that these two things are especially important for river restoration applications. Copyright © 2016 John Wiley & Sons, Ltd.