Investigation of the Calibration Function of Local Earthquake Magnitude （ ML ） in the Fujian-Taiwan Region

The author carefully selected earthquakes with M_L=4.0～5.0, 215 occurring in the crust in the Taiwan region. The attenuation characteristics of maximum displacement recorded by the Fujian digital network have been obtained by multi-analysis as follows:logA=2.07 231.1/Δ (150km≤Δ≤650km) And the corresponding expression of calibration function is, R(Δ)=3.45-231.1(1/Δ-0.01) (150km≤Δ≤650km) Then, the author determined the magnitude and its error with the data from the Fujian network using the calibration function brought forward in 1997 and the above formula for 790 earthquakes occurring in the crust in the Taiwan region from September 1997 ～ August 2005. The result indicates that the average error of the network is 0.20 with the former and 0.18 with the latter. The average error is 0.13 with the latter with station correction. Compared with the magnitude determined by Taiwan seismologists, the magnitude value with the former is lower by 0.50 on average and that with the latter is higher by 0.08 on average.     

The mean value concept in mono-linear regression of multi-variables and its application to trace studies in geosciences

The "mean value concept" in a mono-linear regression of multi-variables is clarified.Its applications to reconstruction of the past 90-year salinity of the sea surface water in Xisha Islands and to tracing the past 80 ka paleo-geomagnetic events from the Luochuan loess 10Be record are introduced in detail,which show the significance and the potential of the "mean value concept" in geoscience research.     

Towards error‐free hybrid simulation using mixed variables

Two procedures are developed and implemented in a hybrid simulation system (HSS) with the aim of enhancing the accuracy and reliability of the online, i.e. pseudo‐dynamic, test results. The first procedure aims at correcting the experimental systematic error in executing the displacement command signal. The error is calculated as the difference between command and feedback signals and correlated to the actuator velocity using the least‐squares method. A feed‐forward error compensation scheme is devised leading to a more accurate execution of the test. The second procedure employs mixed variables with mode switching between displacement and force controls. The newly derived force control algorithm is evaluated using a parametric study to assess its stability and accuracy. The implementation of the mixed variables procedure is designed to adopt force control for high stiffness states of the structural response and displacement control otherwise, where the resolution of the involved instruments may favour this type of mixed control. A simple pseudo‐dynamic experiment of steel cantilever members is used to validate the HSS. Moreover, two experiments as application examples for the two developed procedures are presented. The two experiments focus on the seismic response of (a) timber shear walls and (b) reinforced concrete frames with and without unreinforced masonry infill wall. Copyright © 2007 John Wiley & Sons, Ltd.     

Stability and accuracy analysis of outer loop dynamics in real‐time pseudodynamic testing of SDOF systems

Real‐time pseudodynamic (PSD) testing is an experimental technique for evaluating the dynamic behaviour of a complex structure. During the test, when the targeted command displacements are not achieved by the test structure, or a delay in the measured restoring forces from the test structure exists, the reliability of the testing method is impaired. The stability and accuracy of real‐time PSD testing in the presence of amplitude error and a time delay in the restoring force is presented. Systems consisting of an elastic single degree of freedom (SDOF) structure with load‐rate independent and dependent restoring forces are considered. Bode plots are used to assess the effects of amplitude error and a time delay on the steady‐state accuracy of the system. A method called the pseudodelay technique is used to derive the exact solution to the delay differential equation for the critical time delay that causes instability of the system. The solution is expressed in terms of the test structure parameters (mass, damping, stiffness). An error in the restoring force amplitude is shown to degrade the accuracy of a real‐time PSD test but not destabilize the system, while a time delay can lead to instability. Example calculations are performed for determining the critical time delay, and numerical simulations with both a constant delay and variable delay in the restoring force are shown to agree well with the stability limit for the system based on the critical time delay solution. The simulation models are also used to investigate the effects of a time delay in the PSD test of an inelastic SDOF system. The effect of energy dissipation in an inelastic structure increases the limit for the critical time delay, due to the energy removed from the system by the energy dissipation. Copyright © 2007 John Wiley & Sons, Ltd.     

带权约束参数平差在工程控制网优化中的应用

介绍用带权约束平差原理编制的工程控制网试验修正法设计和平差程序,并用于设计工程导线和平差变形观测控制网等实际工程的例子,据此提供一些结论和建议.     

矢量GIS数据位置精度评价

论述了采用野外测量法评价矢量GIS数据位置精度的过程，为精确评价位置精度提出了相应的质量控制措施，讨论了必要的检测点数目、检测点选择等，并对该方法的适用范围作了说明。     

光学测微器的原理、检定及误差分析

着重讨论了高精度光学测微器的基本工作原理、检定方法及误差分析。     

经纬仪i角检定中的符号问题

通过对经纬仪横轴与竖轴垂直度的测试分析，就检定规程JJG414-94中所得供的计算公式的符号问题，提出了更正意见。     

Rank-Defect Adjustment Model for Survey-Line Systematic Errors in Marine Survey Net

In this paper,the structure of systematic and random errors in marine survey net are discussed in detail and the adjustment method for observations of marine survey net is studied,in which the rank-defect haracteristic is discovered first up to now.On the basis of the survey-line systematic error model,the formulae of the rank-defect adjustment model are deduced according to modern adjustment theory.An examle of calculations with really observed data is carried out to demonstrate the efficiency of this adjustment model.Moreover,it is proved that the semi-systematic error correction method used at present in marine gravimetry in China is a special case of the adjustment model presented in this paper.