浅析套管井测井技术进展及其应用成效

随着石油勘探开发的需要,套管测井技术发展十分迅速。套管井测井是油气井测井技术的系列之一,本文主要介绍套管井测井的几项主要技术及其一些应用实例,包括注入剖面、产出剖面、储层评价以及固井与套管质量评价等方面主要测井技术的简要介绍及其应用。套管井测井技术涉及探井、开发井和生产井,可分为直井、水平井和井间等测量方式,贯穿于油气勘探开发的全过程,为油气田的高效开发和增储上产提供了强有力的技术支持。     

CRONUS-Earth calibration samples from the Huancané II moraines,Quelccaya Ice Cap,Peru

The Huancané II moraines deposited by the Quelccaya Ice Cap in southern Peru were selected by the CRONUS-Earth Project as a primary site for evaluating cosmogenic-nuclide scaling methods and for calibrating production rates. The CRONUS-Earth Project is an effort to improve the state of the art for applications of cosmogenic nuclides to earth-surface chronology and processes. The Huancané II moraines are situated in the southern Peruvian Andes at about 4850 m and ∼13.9°S, 70.9°W. They are favorable for cosmogenic-nuclide calibration because of their low-latitude and high-elevation setting, because their age is very well constrained to 12.3 ± 0.1 ka by 34 radiocarbon ages on peat bracketing the moraines, and because boulder coverage by snow or soil is thought to be very unlikely. However, boulder-surface erosion by granular disintegration is observed and a ∼4% correction was applied to measured concentrations to compensate. Samples from 10 boulders were analyzed for ¹⁰Be, ²⁶Al, and ³⁶Cl. Interlaboratory bias at the ∼5% level was the largest contributor to variability of the ¹⁰Be samples, which were prepared by three laboratories (the other two nuclides were only prepared by one laboratory). Other than this issue, variability for all three nuclides was very low, with standard deviations of the analyses only slightly larger than the analytical uncertainties. The site production rates (corrected for topographic shielding, erosion, and radionuclide decay) at the mean site elevation of 4857 m were 45.5 ± 1.6 atoms ¹⁰Be (g quartz)⁻¹ yr⁻¹, 303 ± 15 atoms ²⁶Al (g quartz)⁻¹ yr⁻¹, and 1690 ± 100 atoms ³⁶Cl (g K)⁻¹ yr⁻¹. The nuclide data from this site, along with data from other primary sites, were used to calibrate the production rates of these three nuclides using seven global scaling methods. The traditional Lal formulation and the new Lifton-Sato-Dunai calibrations yield average ages for the Huancané samples that are in excellent-to-good agreement with the radiocarbon age control (within 0.7% for ¹⁰Be and ³⁶Cl and 6% for ²⁶Al). However, all of the neutron-monitor-based methods yielded ages that were too young by about 20%. The nuclide production ratios at this site are 6.74 ± 0.34 for ²⁶Al/¹⁰Be in quartz and 37.8 ± 2.3 (atoms ³⁶Cl (g K)⁻¹) (atom ¹⁰Be (g SiO₂)⁻¹)⁻¹ for ³⁶Cl/¹⁰Be, in sanidine and quartz, respectively.     

双重介质水平井产量递减分析方法

水平井开发特殊类型油气藏有其独到优势,针对双重孔隙介质水平井复杂渗流,以Warren-Root双重介质模型为基础,建立了水平井三维不稳定渗流模型,采用Laplace变换、有限Fourier余弦变换及叠加积分等方法对模型进行求解,获得定产条件下无量纲井底压力解,再利用Duhamel褶积原理将定产条件压力解变换为井底定压条件下的产量解;通过重新定义无量纲量建立McCray型产量积分平均递减方程,结合Stehfest数值反演,获得无量纲产量积分平均递减曲线及其导数曲线图版。计算结果表明,产量积分平均导数曲线上出现双重介质特有的“凹子”, 应用该类图版拟合生产数据可方便进行产量预测及储层动态参数求取。     

三角褐指藻和亚心形扁藻对太平洋纺锤水蚤繁殖与生化指标的影响

采用实验生态的方法,探讨三角褐指藻(Phaeodactylum tricornutum)、亚心形扁藻(Platymonassubcordiformis)对太平洋纺锤水蚤(Acartia pacifica)繁殖及其生化指标的影响.实验结果表明,三角褐指藻对太平洋纺锤水蚤产卵量和卵的孵化率均具有抑制作用,随着投喂时间的增加,太平洋纺锤水蚤的产卵量由15.02±3.15 ind/d下降到3.25±3.15 ind/d(p<0.05),其卵的孵化率由22.88%±2.49%下降到14.84%±1.20%(p<0.05).而投喂亚心形扁藻的太平洋纺锤水蚤其产卵量和卵的孵化率与对照组无显著差异(p>0.05).投喂三角褐指藻后,太平洋纺锤水蚤的超氧化物歧化酶(SOD)活力相对于投喂亚心形扁藻的增加了20.94±0.04μg/mg,其谷胱甘肽过氧化物酶(GPX)活力增加了15.812±1.240 U/mg.这表明相对于亚心形扁藻,三角褐指藻对太平洋纺锤水蚤的抗氧化性酶具有诱导作用.     

深水半潜式生产平台耦合动力特性对比研究

应用数值模拟与模型试验相结合的方法研究半潜式生产平台系泊状态下的耦合动力特性。建立耦合分析模型,时域内计算求解平台的动力响应,选取缩尺比为1∶60,采用等效截断模型方法对数值模拟结果进行验证。通过对比模型试验与数值模拟结果发现:等效截断系泊系统可以较好地模拟平台的位移响应,但在系泊张力方面却差异较大,此外极端海况下平台的甲板上浪问题也必须得到充分重视。     

饵料、温度和盐度对两种海洋桡足类摄食与排粪的影响

中华哲水蚤是中国近海典型的浮游桡足类,猛水蚤是青岛胶州湾和汇泉湾常见底栖桡足类,研究2种海洋桡足类的摄食和排粪规律可为大量培养桡足类提供最佳条件。论文研究了在6种不同饵料(球等鞭金藻、亚心形扁藻、小球藻、绿色巴夫藻、三角褐指藻、小新月菱形藻)的条件下,温度和盐度对中华哲水蚤和猛水蚤摄食和排粪的影响。温度和盐度对2种桡足类摄食和排粪的影响具有种间差异性。中华哲水蚤在15℃的摄食率、滤水率和排粪率高于在20和25℃的摄食率、滤水率和排粪率。在15、20和25℃3个温度范围内,猛水蚤的摄食率、滤水率和排粪率随温度升高而升高。在20～36盐度范围内,中华哲水蚤的摄食率、滤水率和排粪率随盐度的升高先升高后降低,在盐度为28时达到最大值,猛水蚤的摄食率、滤水率和排粪率随盐度升高而逐渐降低,猛水蚤摄食和排粪的最适盐度为20。温度和盐度实验均表明,在6种饵料中,亚心形扁藻和球等鞭金藻有利于中华哲水蚤的摄食,球等鞭金藻有利于猛水蚤的摄食,而小球藻对2种桡足类的摄食均不利。     

Estimates of potential new production in the Java-Sumatra upwelling system

The Java-Sumatra upwelling is one of the most important upwelling systems in the Indian Ocean, with maximum upwelling intensity in July through August. To estimate the nitrate supplied by upwelling, we developed a three-dimensional hydrodynamic model to calculate the mean vertical speed and determine the depth of upwelling. We used in-situ vertical nitrate profiles to assess nitrate concentration in the upwelled waters, and calculated the nitrate supply as the product of nitrate concentration and vertical transport obtained from the numerical model. The calculated result represents potential new production generated in the upwelling region. We found that on the event time scale (monthly) of Java-Sumatra upwelling, water brought to the surface originated from locations 100-m deep, giving a nitrate supply of 93.77×10 3mol/s and potential new production of 1.02×10 14gC/a.     

水平井生产测井组合仪模拟井测量数据分析与模型建立

由于水平油水两相流局部流速及局部相含率沿管径方向存在复杂分布,致使其流量及相含率测量非常困难.本文利用伞集流涡轮流量计、电导传感器、过流式电容传感器构成的生产测井组合仪,在水平油水两相流模拟井中开展了动态实验,分析了流动特性及管子角度倾斜对涡轮流量计及含水率传感器响应特性的影响.根据电容及电导传感器在不同总流量及含水率范围的响应分辨特性,分别采用变系数漂移模型及统计模型预测分相流量,发现变系数漂移模型能够自适应调整模型中的流型参数,且对油水两相分相流量具有较高预测精度.     

国家级风景名胜区旅游效率测度与区位可达性分析

综合运用数据包络分析方法(DEA)与CES生产函数模型,测算了1994、2000、2009年国家级风景名胜区旅游效率,探讨了旅游效率与区位可达性之间的内在关联,结合GIS空间分析功能,定量模拟了区位可达性对风景名胜区旅游总产出的影响及其效率变化。结果表明：①国家级风景名胜区旅游效率水平整体较低,DEA最优比例较小,反映在空间上呈现东部高、中西部低的空间格局;区域划分上,东北地区、东部沿海、北部沿海综合效率较高,呈先提高后下降趋势,纯技术效率变化与综合效率较为相似,规模效率整体呈现上升态势。②国家级风景名胜区旅游效率高值区总体上呈现以江浙地区为点,分别以西南和东北方向为轴线,以中国人口地理分界线为弧线的“扇形”格局;类型划分上,以湖泊型、纪念地型、山水型、休闲疗养型风景区综合效率较高,山岳型、宗教型纯技术效率逐步提高,规模效率以森林型与山水型变化较大。③区位可达性与生产要素之间满足某一阈值时,区位可达性对旅游效率总体上起到促进作用,局部范围依然存在比例失调,成为制约旅游效率提升的瓶颈,旅游效率变化与总产出变化特征不尽相同,形成了负值区域集聚但偏向异同的空间格局。