The strain‐dependent spatial evolution of garnet in a high‐P ductile shear zone from the Western Gneiss Region (Norway): a synchrotron X‐ray microtomography study

Reaction and deformation microfabrics provide key information to understand the thermodynamic and kinetic controls of tectono‐metamorphic processes, however, they are usually analysed in two dimensions, omitting important information regarding the third spatial dimension. We applied synchrotron‐based X‐ray microtomography to document the evolution of a pristine olivine gabbro into a deformed omphacite–garnet eclogite in four dimensions, where the 4^th dimension is represented by the degree of strain. In the investigated samples, which cover a strain gradient into a shear zone from the Western Gneiss Region (Norway), we focused on the spatial transformation of garnet coronas into elongated garnet clusters with increasing strain. The microtomographic data allowed quantification of garnet volume, shape and spatial arrangement evolution with increasing strain. The microtomographic observations were combined with light microscope and backscatter electron images as well as electron microprobe (EMPA) and electron backscatter diffraction (EBSD) analysis to correlate mineral composition and orientation data with the X‐ray absorption signal of the same mineral grains. With increasing deformation, the garnet volume almost triples. In the low‐strain domain, garnet grains form a well interconnected large garnet aggregate that develops throughout the entire sample. We also observed that garnet coronas in the gabbros never completely encapsulate olivine grains. In the most highly deformed eclogites, the oblate shapes of garnet clusters reflect a deformational origin of the microfabrics. We interpret the aligned garnet aggregates to direct synkinematic fluid flow, and consequently influence the transport of dissolved chemical components. EBSD analyses reveal that garnet shows a near‐random crystal preferred orientation that testifies no evidence for crystal plasticity. There is, however evidence for minor fracturing, neo‐nucleation and overgrowth. Microprobe chemical analysis revealed that garnet compositions progressively equilibrate to eclogite facies, becoming more almandine‐rich. We interpret these observations as pointing to a mechanical disintegration of the garnet coronas during strain localization, and their rearrangement into individual garnet clusters through a combination of garnet coalescence and overgrowth while the rock was deforming.     

Shear wave propagation along infinite slopes: A theoretically based numerical study

In this paper, the seismic response of ‘infinitely’ long slopes is numerically analysed via the formulation of a 1D analytical/numerical model, in which the soil mechanical behaviour is assumed to be elasto‐perfectly viscoplastic and simple shear (SS) kinematical constraints are imposed. In order to simplify the problem, a theoretically based procedure to set up a fully 1D shear constitutive model is defined, within which the mechanical response of a multiaxial relationship is condensed. The use of a 1D shear constitutive model is aimed at reducing the number of unknowns and, therefore, the computational costs. In particular, the case of the Mohr–Coulomb yield criterion is considered, while an enhanced Taylor–Galerkin finite element algorithm is employed to simulate the seismic wave propagation within the soil stratum. The proposed ‘condensation’/calibration procedure captures both the ‘pseudo’‐hardening pre‐failure behaviour and the influence of dilation on the occurrence of strain‐localization, which characterize, under SS conditions, the static response of virgin perfectly plastic soils. The effectiveness of the conceived method is shown with reference to freshly deposited deposits, while, in the case of highly overconsolidated strata, some difficulties arise because of the brittle behaviour induced both by unloading and non‐associativeness. Copyright © 2011 John Wiley & Sons, Ltd.     

Research of pattern dynamics parameters of crustal deformation field in seismogenic process

ＲｅｓｅａｒｃｈｏｆｐａｔｔｅｒｎｄｙｎａｍｉｃｓｐａｒａｍｅｔｅｒｓｏｆｃｒｕｓｔａｌｄｅｆｏｒｍａｔｉｏｎｆｉｅｌｄｉｎｓｅｉｓｍｏｇｅｎｉｃｐｒｏｃｅｓｓＳｈｕｏ－ＹｕＺＨＯＵ（周硕愚），ＹｕｎＷＵ（吴云），Ｒｕｏ－ＢｏＷＡＮＧ（王若柏）ａｎｄ...     

Compaction localization in the Earth and the laboratory: state of the research and research directions

Localized compaction in porous rocks is a recently recognized phenomenon that has been shown to reduce permeability dramatically. Consequently, the phenomenon is relevant to a variety of technologies involving fluid injection or withdrawal. This article summarizes current understanding of localized compaction and impediments to further progress. The article is based on discussions at a small workshop on localized compaction sponsored by the Office of Science, U. S. Department of Energy.     

剪切带倾角尺度律与局部化启动跳跃稳定研究

研究了剪切带倾角是如何依赖于岩样高度以及剪切带的不稳定性。建立了准脆性材料试件剪切带倾角尺度效应模型,得到了剪切带倾角尺度效应的解析解,且与实验结果比较相符。研究结果表明:剪切带倾角随着试件高度的增加而增加,但其增加幅逐渐减缓,最终趋于稳定值。笔者还对剪应变局部化启动、跳跃和稳定进行了理论分析,解释了实验所观测到的剪切带跳跃现象和砂岩岩样应变局部化较煤样滞后的原因。剪应变局部化是否发生跳跃,关键取决于全程应力-应变曲线软化段是否存在拐点。对于没有拐点的情形,宏观剪切带图案不跳跃。局部化是导致准脆性材料试件剪切带倾角尺度效应的原因。     

Geospatial technologies for Chang’e-3 and Chang’e-4 lunar rover missions

ABSTRACT

This paper presents a brief overview of the geospatial technologies developed and applied in Chang’e-3 and Chang’e-4 lunar rover missions. Photogrammetric mapping techniques were used to produce topographic products of the landing site with meter level resolution using orbital images before landing, and to produce centimeter-resolution topographic products in near real-time after landing. Visual positioning techniques were used to determine the locations of the two landers using descent images and orbital basemaps immediately after landing. During surface operations, visual-positioning-based rover localization was performed routinely at each waypoint using Navcam images. The topographic analysis and rover localization results directly supported waypoint-to-waypoint path planning, science target selection and scientific investigations. A GIS-based digital cartography system was also developed to support rover teleoperation.     

隐伏矿床(体)定位预测的综合找勘方法

简述了综合找勘方法的组成和特点,重点从地质背景条件的分析、控矿构造与矿体特征的研究、地球物理测量、深部工程验证和找勘模式的建立等方面介绍了综合找勘方法的应用与研究内容;并列举了应用综合找勘方法在黔西北地区寻找隐伏铅-锌矿效果较明显的猫猫厂铅-锌矿和垭都铅-锌矿实例。     

基于SuperMap IS.NET的地图网站设计与实现

地图网站是地理空间信息面向公众发布的最好形式。以湖南地图网(www.dzmap.cn)为例,介绍了基于SuperMap IS.NET的地图网站的服务定位、地图数据分析与处理,并讨论了网络地图发布平台架构、网络地图功能与属性数据库设计、数据更新等方面的设计与实现。     

Performance of mixed and enhanced finite elements for strain localization in hypoplasticity

Displacement and mixed finite element formulations of shear localization in materials are presented. The formulations are based on hypoplastic constitutive laws for soils and the mixed enhanced treatment involving displacement, strain and stress rates as independently varied fields. Included in these formulations are the standard displacement method, the three‐field mixed formulation, the enhanced assumed strain method and the mixed enhanced strain method. Several numerical examples demonstrating the capability and performance of the different finite element formulations are presented. The numerical results are compared with available experimental data for Hostun RF sand and numerical results for Karlsruhe sand on biaxial tests. Copyright © 2011 John Wiley & Sons, Ltd.     

Late Tertiary tectonic evolution of northern Iran: A case for simple crustal folding

Here we present a crustal folding or buckling mechanism to explain the rootless 3–5 km high Alborz Mountains in northern Iran as well as  10 km of Late Miocene to recent subsidence in the south Caspian basin and  3–6 km of subsidence in the central Iranian basin in the context of the middle Miocene to recent Arabia–Eurasia collision. A key element of the mechanism is the presence of lateral and vertical lithospheric strength contrasts between the north Iranian continental and south Caspian oceanic crusts: when compression from the collision is applied across the region, the strong south Caspian oceanic crust, buried under > 10 km of premiddle Miocene sediment, interacts with the bottom of the mechanically strong continental upper crust of northern Iran, resulting in upward buckling of the continental crust and downward buckling of the oceanic crust. We test this mechanism using a finite-element numerical model with a Maxwell rheology and obtain results that are consistent with the geological and geophysical observations. The observations compiled here and the model results demonstrate the potential for using this region as a natural laboratory for studying the early stages of continent–oceanic collision, including processes like basin inversion, fault localization and, potentially, subduction initiation.