长江中下游典型浅水湖泊沉积物水界面磷与铁的耦合关系

目前普遍认为磷铁耦合关系是P迁移的主要机制,但大部分研究结果并未提供直接的原位证据.为了探索沉积物剖面磷(P)与铁(Fe)的耦合关系,利用Zr O-Chelex薄膜扩散梯度技术(ZrO-Chelex DGT),分别对太湖、巢湖、鄱阳湖和洞庭湖4个浅水湖泊沉积物有效态Fe和P进行高分辨采样和分析.结果表明,不同湖区有效态Fe和P浓度在沉积物-水界面处开始增加,之后波动变化,垂向异质性较强,但两者浓度变化同步.有效态P和Fe浓度的相关分析结果证明两者浓度具有显著的线性相关.室内厌氧培养实验进一步表明,Fe~(3+)的还原性促使Fe~(2+)与铁结合态磷的释放,促使DGT有效态P与Fe同步变化.该结果表明沉积物P的二次迁移和释放受Fe氧化还原过程的控制,为铁磷耦合关系提供了直接证据.     

Evaluation of force-based and displacement-based out-of-plane seismic assessment methods for unreinforced masonry walls through refined model simulations

The performance of force-based and displacement-based seismic assessment methods for the life-safety limit state check of out-of-plane loaded unreinforced masonry walls is evaluated on the basis of refined numerical simulations. For this purpose, a discrete element model of a vertically spanning wall is built and validated against experimental results from static and dynamic test conditions. The model is then analysed for a large range of wall configurations. For each configuration, a static pushover analysis and a series of incremental dynamic analyses are run, the latter permitting to determine the capacity of the wall under dynamic loading. The accuracy of the assessment methods in predicting the acceleration at which the walls collapse is evaluated. It is found that the displacement-based method is more accurate, robust, and safe than the force-based method. The comparison also shows that for walls characterised by a relatively high ratio of axial load to Euler's critical load, both assessment methods lead to an overestimation of the wall capacity. As a remedy, a modification to the methods based on a recently developed mechanical model is put forward and tested. For the force-based method, it is additionally suggested to set for walls with relatively high overburden ratios the behaviour factor equal to 1. To ensure reproducibility of this study, all input and output files of the numerical simulations are made publicly available.     

机械连接预应力实心方桩承台节点抗震性能试验研究

预应力管桩在高烈度抗震设防地区已禁用,而普通钢筋混凝土方桩成本较高。首先针对卡扣式机械连接预应力混凝土实心方桩、PHC管桩和普通钢筋混凝土方桩与承台处的节点进行拟静力试验,并利用试验数据针对Park-Ang损伤模型进行了修正,进行了损伤指数分析。研究结果表明:预应力方桩比普通钢筋混凝土方桩的抗裂性能明显好,而预应力混凝土实心方桩承台节点耗能能力和延性低于预应力管桩和普通钢筋混凝土方桩;截桩施工导致桩端部损失部分预应力,相比较未截桩试件屈服荷载和极限荷载均减小,节点裂缝开展较早,损伤较未截桩试件严重;增配普通钢筋试件的滞回曲线比较饱满,水平承载能力和位移延性得到提升,节点抗震性能得到提升与改善;预应力混凝土实心方桩损伤前期较小,而一旦发生损伤后,损伤指数发展较快。     

Real-time on-line test for MDOF systems

This paper presents a test system for conducting on-line tests in a real time and a series of real-time on-line tests conducted to verify the effectiveness of the system. The proposed system is characterized by (1) use of a Digital Signal Processor (DSP) now readily available, (2) adoption of the C language to ensure easy programming, and (3) separation of response analysis and displacement signal generation to apply the system for tests with complex structures. To create displacement signals successively without being interrupted by the computation of equations of motion, extrapolation and interpolation procedures using present and past target displacements are developed. Base-isolated building models were chosen for the real-time on-line test. The effectiveness of the extrapolation and interpolation procedures was demonstrated through a series of real-time on-line tests applied to the models treated as SDOF structures. A five-storey base-isolated building model (treated as a six DOF structure) was tested for various ground motions, and it was verified that the system is able to simulate earthquake responses involving large displacements and large velocities. The number of DOFs that can be handled in the proposed system was investigated, and it was found that the system is capable of performing the test with reasonable accuracy for up to 10 DOF structures with a range of response frequency not greater than 3·0 Hz, or 12 DOF structures with a range of response frequency not greater than 2·0 Hz. Copyright © 1999 John Wiley & Sons, Ltd.     

厚垫层-砂桩复合地基现场试验研究

以瓯江北口大桥南锚碇巨型沉井场地地基处理为科研背景,研究厚垫层-砂桩复合地基的适用性及其承载力的影响因素,针对不同的垫层材料、垫层厚度和砂桩间距共进行了9组静载试验。为得到砂桩施工对周围已完成砂桩的影响程度,还进行了砂桩施工相互影响试验。试验结果表明：厚垫层-砂桩加固软土地基效果非常好,是大型沉井地基处理较为理想的方式;垫层含水率、垫层材料和垫层厚度对其承载力的影响程度均大于砂桩间距;砂桩施工过程对周围已完成砂桩的影响和对周围土体的影响具有很大差别,利用传统沉桩挤土理论分析砂桩施工对周围已完成砂桩的影响将产生较大偏差;砂桩施工对周围已完成砂桩会产生较大影响,最大影响范围主要集中在地表以下1/3桩长范围内,影响程度与土层的种类和性质有密切关系,土性越好,影响程度越小;可利用增大砂桩间距和已有砂桩的阻隔效应减小影响程度。     

水平成层场地动剪应变与震动速度关系解析

以SHAKE2000为代表的频域等效线性化是目前主流的土层地震动计算方法。由于该方法在软土场地计算结果严重不合理,其改进方法成为目前研究热点,主要采用频率相关法,但一直没有取得实效。对频率相关法中土体动剪应变和震动速度成恒定比例关系的基本假定进行研究,从波动方程推导出了均匀全空间单向行波、单一均匀半无限场地、成层场地等3种典型场地中土体剪应变与震动速度关系的精确解答,通过数值试验研究了这一假定的合理性与偏差程度。结果表明：动剪应变和震动速度成恒定比例关系这一假定只有在无边界均匀介质单向行波情形下才成立,对于实际成层土场地,动剪应变与震动速度关系强烈依赖于波的频率和观察点的位置,如果在土层地震反应分析中忽略反射波而采用单向行波恒定比例假定将会使计算结果产生显著偏差;动剪应变与震动速度成恒定比例关系的假定导致的偏差达4个量级,即使对于单一均匀半无限空间模型偏差也十分显著;对实际土层地震动的求解,该假定在理论上定性错误,定量上偏差不可接受,必须放弃而另寻其他途径。     

Benchmark computations for flows around a stationary cylinder with high Reynolds numbers by RANS-overset grid approach

The aim of this paper is to evaluate the accuracy, stability and efficiency of the overset grid approach coupled with the RANS (Reynolds Averaged Navier-Stokes) model via the benchmark computations of flows around a stationary smooth circular cylinder. Two dimensional numerical results are presented within a wide range of Reynolds numbers (6.31 × 10⁴ ∼ 7.57 × 10⁵) including the critical flow regime. All the simulations are carried out using the RANS solver pimpleFoam provided by OpenFOAM, an open source CFD (Computational Fluid Dynamics) toolkit. Firstly, a grid convergence study is performed. The results of the time-averaged drag and lift force coefficients, root-mean square value of lift force coefficient and Strouhal number (St number) are then compared with the experimental data. The velocity, vorticity fields and pressure distribution are also given. One main conclusion is that the numerical solutions in regard to a fixed cylinderare not deteriorated due to the implementation of the overset grid. Furthermore, it can be an appealing approach to facilitate simulations of Vortex Induced Vibrations (VIV), which involves grid deformation. The present study is a good start to implement the overset grid to solve VIV problems in the future.     

Principal stress rotation and cyclic shear strength for an elliptical rotation stress path

Based on the analytical solutions for wave-induced soil response in an unsaturated anisotropic seabed of finite thickness, an elliptical, i.e., noncircular rotation stress path is proven to be a more common state in a soil element with the cyclic shear stresses due to the traveling linear wave. The influence of an elliptical stress path on the characterization of failure strength is analyzed using three new parameters representing the shape, size, and the orientation of the ellipse. A series of cyclic rotational shear tests on the reconstituted specimens of Chinese Fujian Standard Sand have been performed to investigate the effect of elliptical stress path. A strength function in term of failure cycles is derived to quantify the failure strength of a given sand within a seabed subjected to regular wave loading. The results provide a basis for the evaluation of liquefaction potential of seabed but also point to a unique backbone cycle shear strength curve for soil under principal stress rotation.     

Constitutive model for cyclic behaviour of cohesionless sands

This paper presents a constitutive model for describing the stress-strain response of sands under cyclic loading. The model, formulated using the critical state theory within the bounding surface plasticity framework, is an upgraded version of an existing model developed for monotonic behaviour of cohesionless sands. With modification of the hardening law, plastic volumetric strain increment and unloading plastic modulus, the original model was modified to simulate cyclic loading. The proposed model was validated against triaxial cyclic loading tests for Fuji River sand, Toyoura sand and Nigata sand. Comparison between the measured and predicted results suggests that the proposed modified model can capture the main features of cohesionless sands under drained and undrained cyclic loading.     

Experimental study on the bidirectional inelastic deformation capacity of U‐shaped steel dampers for seismic isolated buildings

Hysteretic dampers are used to dissipate earthquake‐induced energy in base‐isolated structures by acquiring inelastic deformations, rendering their hysteretic behavior of vital importance. The present paper focuses on investigating the behavior of U‐shaped steel dampers under bidirectional loading; this is significantly different from their corresponding uniaxial behavior. Two main sets of loading tests on full‐scale specimens are conducted in this regard: (i) quasi‐static tests with simple histories and (ii) dynamic tests with realistic loading histories. Based on the results obtained in the quasi‐static tests, an interaction curve that accounts for the reduction of the cyclic deformation capacity is proposed. However, the fidelity of this relation must be assessed under loading conditions similar to those of a seismically isolated structure subjected to an earthquake, which represents the goal of the second set of tests. The results of the dynamic tests validate the proposed interaction curve for estimating the deformation capacity of U‐shaped steel dampers under bidirectional loading. Copyright © 2015 John Wiley & Sons, Ltd.