Wetlands with controlled drainage and sub‐irrigation systems—modelling of the water balance

Over the past centuries, the agricultural use of wetlands in Central Europe has required interference with the natural wetland water balance. Often this has consisted of drainage measures alone. In low‐precipitation areas, it has also involved the operation of combined drainage and sub‐irrigation systems. Model studies conducted as part of planning processes, or with a view to finding out the impact of changing climate conditions on the water balance of wetlands, must take these facts into account. For this reason, a water balance model has been devised for wetlands whose water balance is governed by water resources management systems. It is based on the WBalMo model system. Special modules were integrated into WBalMo to calculate the water balance of wetland areas (WABI module) and to regulate inflow partitioning within the wetland (REGINF module). When calculating the water balance, the WABI module takes into account precipitation and potential evapotranspiration, groundwater levels below surface, soil types, land‐use classes, inflows via the running water system, and data for target water levels. It provides actual evapotranspiration, discharge into the running water system, and groundwater levels in the area. The example of the Spreewald, a major wetland area in north‐eastern Germany, was used to design and test the WBalMo Spreewald model. The comparison of measured and calculated water balance parameters of the wetland area confirms the suitability of the model for water balance studies in wetlands with complex water resources management systems. The results reveal the strong influence of water management on the water balance of such areas. The model system has proved to be excellently suited for planning and carrying out water management measures aimed at the sustainable development of wetlands. Furthermore, scenario analyses can be used to assess the impact of global change on the water balance of wetlands. Copyright © 2006 John Wiley & Sons, Ltd.     

Concentration–discharge relationships reflect chemostatic characteristics of US catchments

Concentration–discharge relationships have been widely used as clues to the hydrochemical processes that control runoff chemistry. Here we examine concentration–discharge relationships for solutes produced primarily by mineral weathering in 59 geochemically diverse US catchments. We show that these catchments exhibit nearly chemostatic behaviour; their stream concentrations of weathering products such as Ca, Mg, Na, and Si typically vary by factors of only 3 to 20 while discharge varies by several orders of magnitude. Similar patterns are observed at the inter‐annual time scale. This behaviour implies that solute concentrations in stream water are not determined by simple dilution of a fixed solute flux by a variable flux of water, and that rates of solute production and/or mobilization must be nearly proportional to water fluxes, both on storm and inter‐annual timescales. We compared these catchments' concentration–discharge relationships to the predictions of several simple hydrological and geochemical models. Most of these models can be forced to approximately fit the observed concentration–discharge relationships, but often only by assuming unrealistic or internally inconsistent parameter values. We propose a new model that also fits the data and may be more robust. We suggest possible tests of the new model for future studies. The relative stability of concentration under widely varying discharge may help make aquatic environments habitable. It also implies that fluxes of weathering solutes in streams, and thus fluxes of alkalinity to the oceans, are determined primarily by water fluxes. Thus, hydrology may be a major driver of the ocean‐alkalinity feedback regulating climate change. Copyright © 2009 John Wiley & Sons, Ltd.     

Climatic control on river discharge simulations,Zackenberg River drainage basin,northeast Greenland

A spatially distributed, physically based, hydrologic modeling system (MIKE SHE) was applied to quantify intra‐ and inter‐annual discharge from the snow and glacierized Zackenberg River drainage basin (512 km²; 20% glacier cover) in northeast Greenland. Evolution of snow accumulation, distribution by wind‐blown snow, blowing‐snow sublimation, and snow and ice surface melt were simulated by a spatially distributed, physically based, snow‐evolution modelling system (SnowModel) and used as input to MIKE SHE. Discharge simulations were performed for three periods 1997–2001 (calibration period), 2001–2005 (validation period), and 2071–2100 (scenario period). The combination of SnowModel and MIKE SHE shows promising results; the timing and magnitude of simulated discharge were generally in accordance with observations (R² = 0·58); however, discrepancies between simulated and observed discharge hydrographs do occur (maximum daily difference up to 44·6 m³ s^?1 and up to 9% difference between observed and simulated cumulative discharge). The model does not perform well when a sudden outburst of glacial dammed water occurs, like the 2005 extreme flood event. The modelling study showed that soil processes related to yearly change in active layer depth and glacial processes (such as changes in yearly glacier area, seasonal changes in the internal glacier drainage system, and the sudden release of glacial bulk water storage) need to be determined, for example, from field studies and incorporated in the models before basin runoff can be quantified more precisely. The SnowModel and MIKE SHE model only include first‐order effects of climate change. For the period 2071–2100, future IPCC A2 and B2 climate scenarios based on the HIRHAM regional climate model and HadCM3 atmosphere–ocean general circulation model simulations indicated a mean annual Zackenberg runoff about 1·5 orders of magnitude greater (around 650 mmWE year^?1) than from today 1997–2005 (around 430 mmWE year^?1), mainly based on changes in negative glacier net mass balance. Copyright © 2007 John Wiley & Sons, Ltd.     

INTERMODAL TRANSPORTATION IN NORTH AMERICA AND THE DEVELOPMENT OF INLAND LOAD CENTERS*

This paper analyzes the changes that are transforming intermodal transportation in the United States and Canada. Traffic is being concentrated at a relatively small number of inland load centers that serve as regional truck distribution points, and are linked by high volume dedicated train services. Both theoretical and practical implications of the changes are examined, and a range of research questions are presented.     

家庭无线网络分享可行性研究——基于无线网络的流量银行wlanbank

在对当前无线网络供求特征分析的基础上,通过研究路由器Openwrt系统的网络架构,对该设计平台下实现无线网络分享的可行性进行探讨.基于Openwrt平台,将无线网络分享及流量平衡的理念引入方案设计中,利用C++语言实现并建立了无线网络流量银行Wlanbank(Wireless LocalArea Networks bank),并对该流量银行的功能和实用性进行了分析.该平台能够方便地实现家庭网络的相互分享,包括客户端与服务器的定时通信、流量结算以及路由器的远程管理等功能.该无线网络分享平台参考金融秩序中的货币流通方式,在流量银行Wlanbank系统中实现在用户互相之间的转账流量交易来获得无线网络的使用,遵循“分享才能使用”、“分享的越多才能使用的越多”的理念,在流量流通过程中制造一种类似金融秩序的平衡,在不损害用户利益的基础上,扩大无线网络覆盖率.     

冲击荷载作用下新型延展式张力腿平台时域分析

延展式张力腿平台是一种适用于深水油气开采的海洋平台结构。提出一种新型平台由四个立柱和一个环形浮箱连接而成,环形浮箱是由四个箱型梁焊接而成。根据给出的南海海域的海况条件和相应的规范计算结构的环境载荷,运用SESAM软件Deep C模块,考虑风、浪、流等环境荷载的作用和张力腿系统的非线性影响,进行了时域耦合分析,得到了平台的运动位移时程、张力腿系统张力时程和张力极值等。模拟波浪破碎作为冲击载荷,得到张力腿平台在冲击荷载作用下的运动位移时程、张力腿系统的张力时程。研究结果表明:该新型平台具有良好的运动响应,张力筋腱应力满足安全要求;在冲击载荷作用下新型平台的运动响应也满足要求。     

An Experimental Study on A Trapezoidal Pendulum Wave Energy Converter in Regular Waves

Experimental studies were conducted on a trapezoidal pendulum wave energy converter in regular waves. To obtain the incident wave height, the analytical method (AM) was used to separate the incident and reflected waves propagating in a wave flume by analysing wave records measured at two locations. The response amplitude operator (RAO), primary conversion efficiency and the total conversion efficiency of the wave energy converter were studied; furthermore, the power take-off damping coefficients corresponding to the load resistances in the experiment were also obtained. The findings demonstrate that the natural period for a pendulum wave energy converter is relatively large. A lower load resistance gives rise to a larger damping coefficient. The model shows relatively higher wave energy conversion efficiency in the range of 1.0?1.2 s for the incident wave period. The maximum primary conversion efficiency achieved was 55.5%, and the maximum overall conversion efficiency was 39.4%.     

Ultimate Load Capacity of Offshore Pipeline with Arbitrary Shape Corrosion Defects

A set of generalized solutions are proposed for estimating ultimate load capacity of pipeline with arbitrary corrosion shapes subjected to combined internal pressure, axial force and bending moment. Isotropic and anisotropic material characteristics in longitudinal and circumferential direction of pipeline are also considered in the proposed equations. Simplified numerical method is used to solve the generalized expressions. The comparisons of numerical results based generalized solutions and full-scale experimental results are carried out. The predicted results agree reasonably well with the experiment results. Meanwhile, the effects of corrosion shapes and locations on the ultimate load capacity are studied.     

单线激光雷达扫描的矿车装载量核算方法

面向露天矿山生产对于矿车装载量核算的需求,本文提出了一种利用单线激光雷达扫描的矿车装载量自动核算方法。该方法首先采用固定式单线激光雷达对目标车辆进行俯视扫描,基于车辆形态特征分割出载荷物顶部点云;然后经时态校正,并与预先构建的车辆信息数据库进行匹配,重建出载荷物的三维表面模型;最后通过对载荷物表面模型的切片积分实现方量核算。以齐大山铁矿运输为例,对多台矿车装载量进行核算测试。结果表明,本文方法可在车辆正常行驶的情况下实时获取载荷物的表面三维点云,平均建模误差为2.54 cm,装载方量核算误差为1.17%。