基于卫星遥感数据改进区域尺度的显热通量模型

以西北半干旱地区的内蒙古农牧交错地带锡林郭勒盟为研究区,以不同退化程度的草地为研究对象,通过叶面积指数计算各像元的动力传输粗糙度长度,以改进显热通量算法;并结合植被／土壤组分温度分别计算基于亚像元的植被／土壤的显热通量。由敏感性分析和模型验证表明,改进的显热通量算法能够提高区域尺度的能量平衡计算精度。     

Validation of a soil water balance model using soil water content and pressure head data

The validation of soil water balance models and the evaluation of the quality of the model predictions at field‐scale require time‐series of in situ measured model outputs. In our study, we have validated such a model using a 6‐year period with time‐series of automatically recorded, daily volumetric soil water contents measured with the time‐domain reflectometry with intelligent microelements (TRIME) method and daily pressure heads measured with tensiometers. The comparisons of simulated with measured soil water contents and pressure heads were analysed using the modelling efficiency index (IA) and the square root of the mean square error (RMSE) in order to evaluate the prediction quality of the model. In our study, IA and RMSE, obtained either from the comparison of simulated with measured soil water contents or the comparison of calculated with observed pressure heads, in some cases lead to different results regarding the evaluation of the simulation quality of the soil water balance model. For example, a good fit between simulated and observed soil water contents does not necessarily result in a comparably good fit between the corresponding calculated and measured pressure heads. Therefore, a combined use of both measurement techniques, which takes into account their respective advantages and disadvantages, gives a more complete overview on the simulation quality of the soil water balance model than the single use of one of those techniques. Copyright © 2004 John Wiley & Sons, Ltd.     

Bearing capacity of strip foundations reinforced with geogrid sheets by using upper bound finite‐element limit analysis

By using the upper bound finite‐elements limit analysis, with an inclusion of single and two horizontal layers of reinforcements, the ultimate bearing capacity has been computed for a rigid strip footing placed over (i) fully granular, (ii) cohesive‐frictional, and (iii) fully cohesive soils. It is assumed that (i) the reinforcements are structurally strong so that no axial tension failure can occur, (ii) the reinforcement sheets have negligible resistance to bending, and (iii) the shear failure can take place between the reinforcement and soil mass. It is expected that the different approximations on which the analysis has been based would generally remain applicable for reinforcements in the form of geogrid sheets. A method has been proposed to incorporate the effect of the reinforcement in the analysis. The efficiency factors, η_c and η_γ, to be multiplied with N_c and N_γ , for finding the bearing capacity of reinforced foundations, have been established. The results have been obtained (i) for different values of ? in case of fully granular and cohesive‐frictional soils, and (ii) for different rates at which the cohesion increases with depth for a fully cohesive soil. The optimum positions of the reinforcements' layers have also been determined. The effect of the reinforcements' length on the results has also been analyzed. As compared to cohesive soils, the granular soils, especially with higher values of ?, cause a much greater increase in the bearing capacity. The results compare reasonably well with the available theoretical and experimental data from literature. Copyright © 2013 John Wiley & Sons, Ltd.     

Modelling and observation of hedgerow transpiration effect on water balance components at the hillslope scale in Brittany

Vegetation has a major influence on the water and energy balance of the earth's surface. In the last century, human activities have modified land use, inducing a consequent change in albedo and potential evapotranspiration. Linear vegetation structures (hedgerows, shelterbelts, open woodland, etc) were particularly abundant but have declined considerably over the past several decades. In this context, it is important to quantify their effect on water and energy balance both on a global scale (climate change and weather prediction) and on a local scale (soil column, hillslope and watershed). The main objective of this study was to quantify the effect of hedgerows on the water cycle by evaluating spatial and temporal variations of water balance components of a hillslope crossed by a hedgerow. Water flow simulation was performed using Hydrus‐2D to emphasize the importance of transpiration in the water balance and to evaluate water extraction from groundwater. Model validation was performed by comparing simulated and observed soil matrix potentials and groundwater levels. Hedgerow transpiration was calculated from sap flow measurements of four trees. Water balance components calculated with a one‐dimensional water balance equation were compared with simulations. Simulation runs with and without tree root uptake underlined the effect of hedgerow transpiration, increasing capillary rise and decreasing drainage. Results demonstrated that the spatial and temporal variability of water balance components was related to the hedgerow presence as well as to the meteorological context. The relations between transpiration, groundwater proximity and soil‐water availability determined the way in which water balance components were affected. Increased capillary rise and decreased drainage near hedges were related to the high transpiration of trees identified in this study. Transpiration reached twice the potential evapotranspiration when groundwater level and precipitation amounts were high. Water balance analysis showed that transpiration was a substantial component, representing 40% of total water output. These results may offer support for improving hydrological models by including the effect of land use and land cover on hydrological processes. Copyright © 2012 John Wiley & Sons, Ltd.     

Snow cover and snowmelt of an extensive High Arctic wetland: spatial and temporal seasonal patterns

Abstract

This study examined the end-of-winter snow storage, its distribution and the spatial and temporal melt patterns of a large, low gradient wetland at Polar Bear Pass, Bathurst Island, Nunavut, Canada. The project utilized a combination of field observations and a physically-based snowmelt model. Topography and wind were the major controls on snow distribution in the region, and snow was routinely scoured from the hilltop regions and deposited into hillslopes and valleys. Timing and duration of snowmelt at Polar Bear Pass were similar in 2008 and 2009. The snowmelt was initiated by an increase in air temperature and net radiation receipt. Inter-annual variability in spatial snowmelt patterns was evident at Polar Bear Pass and was attributed to a non-uniform snow cover distribution and local microclimate conditions. In situ field studies and modelling remain important in High Arctic regions for assessing wetland water budgets and runoff, in addition to model parameterization and validation of satellite imagery.

Editor Z.W. Kundzewicz

Citation Assini, J. and Young, K.L., 2012. Snow cover and snowmelt of an extensive High Arctic wetland: spatial and temporal seasonal patterns. Hydrological Sciences Journal, 57 (4), 738–755.     

Rate and historical change of direct recharge from precipitation constrained by unsaturated zone profiles of chloride and oxygen‐18 in dry river bed of North China Plain

Quantifying of direct recharge derived from precipitation is crucial for assessing sustainability of well‐irrigated agriculture. In the North China Plain, the land use is dominated by groundwater‐irrigated farmland where the direct recharge derived from precipitation and irrigation. To characterize the mean rate and historical variance of direct recharge derived from precipitation, unsaturated zone profiles of chloride and δ¹⁸O in the dry river bed of the Beiyishui River were employed. The results show that archival time scale of the profile covers the duration from 1980 to 2002 (corresponding to depths from 5 to 2 m) which is indicated by matching the δ¹⁸O peaks in the isotope profile with the aridity indexes gained by instrumental records of annual precipitation and annual potential evaporation. Using the chloride mass balance method, the mean rate of the direct recharge corresponding to the archival time scale is estimated to be 3·8 ± 0·8 mm year^?1, which accounts for about 0·7% of the long‐term average annual precipitation. Further, the direct recharge rates vary from 2·1 to 6·8 mm year^?1 since 1980. Despite the subhumid climate, the estimate of recharge rates is in line with other findings in semiarid regions. The low rate of direct recharge is considered as a result of the relative dry climate in recent decades. In dry river bed, unsaturated zone profiles of chloride and δ¹⁸O combined with instrumental records could offer valuable information about the direct recharge derived from precipitation during droughts. Copyright © 2011 John Wiley & Sons, Ltd.     

An integrated procedure to evaluate hydrological models

The growing concern for health‐related problems deriving from pollutants leaching is driving national and international administrations to support the development of tools for evaluating the effects of alternate management scenarios and identifying vulnerable areas. Cropping systems models are powerful tools for evaluating leachates under different environmental, social, and management conditions. As percolating water is the transport vehicle for pollutants transport in soil, a reliable evaluation of water balance models is a fundamental prerequisite for investigating pesticides and nitrate fate. As specific approaches for the evaluation of multi‐layer evolution of state variables are missing, we propose a fuzzy‐based, integrated indicator (I_SWC: 0, best; 1, worst) for a comprehensive evaluation of soil water content (SWC) simulations. We aggregated error metrics with others quantifying the homogeneity of errors across different soil layers, the capability of models to reproduce complex dynamics function of both time and soil depth, and model complexity. We tested I_SWC on a sample dataset where the models CropSyst and CERES‐Wheat were used to simulate SWC for winter wheat systems. I_SWC revealed that, in the explored conditions, the global assessment of the two models' performances allowed identification of CropSyst as the best (average I_SWC = 0·441, with a value of 0·537 obtained by CERES‐Wheat), although each model prevailed for some of the metrics. CropSyst presented the highest accuracy (average agreement module = 0·400), whereas CERES‐Wheat's accuracy was slightly worse, although achieved with a simplified modelling approach (average Akaike Information Criterion = − 230·44), thereby favouring large‐area applicability. The non‐univocal scores achieved by the models for the different metrics support the use of multi‐metric evaluation approaches for quantifying the different aspects of water balance model performances. Copyright © 2010 John Wiley & Sons, Ltd.     

Assessing uncertainties in a conceptual water balance model using Bayesian methodology / Estimation bayésienne des incertitudes au sein d’une modélisation conceptuelle de bilan hydrologique

Abstract

Abstract The aim of this study was to estimate the uncertainties in the streamflow simulated by a rainfall–runoff model. Two sources of uncertainties in hydrological modelling were considered: the uncertainties in model parameters and those in model structure. The uncertainties were calculated by Bayesian statistics, and the Metropolis-Hastings algorithm was used to simulate the posterior parameter distribution. The parameter uncertainty calculated by the Metropolis-Hastings algorithm was compared to maximum likelihood estimates which assume that both the parameters and model residuals are normally distributed. The study was performed using the model WASMOD on 25 basins in central Sweden. Confidence intervals in the simulated discharge due to the parameter uncertainty and the total uncertainty were calculated. The results indicate that (a) the Metropolis-Hastings algorithm and the maximum likelihood method give almost identical estimates concerning the parameter uncertainty, and (b) the uncertainties in the simulated streamflow due to the parameter uncertainty are less important than uncertainties originating from other sources for this simple model with fewer parameters.     

Analytical solutions for Euler–Bernoulli beam on visco‐elastic foundation subjected to moving load

Analytical solutions for the steady‐state response of an infinite beam resting on a visco‐elastic foundation and subjected to a concentrated load moving with a constant velocity are developed in this paper. The beam responses investigated are deflection, bending moment, shear force and contact pressure. The mechanical resistance of the foundation is modeled using two parameters k_s and t_s — k_s accounts for soil resistance due to compressive strains in the soil and t_s accounts for the resistance due to shear strains. Since this model represents the ground behavior more accurately than the Winkler spring model, the developed solutions produce beam responses that are closer to reality than those obtained using the existing solutions for Winkler model. The dynamic beam responses depend on the damping present in the system and on the velocity of the moving load. Based on the study, dynamic amplification curves are developed for beam deflection. Such amplification curves for deflection, bending moment, shear force and contact pressure can be developed for any beam‐foundation system and can be used in design. Copyright © 2012 John Wiley & Sons, Ltd.     

Estimation of actual evapotranspiration from an alluvial aquifer of the Kouris catchment (Cyprus) using continuous streamflow records

The Kouris catchment is located in the south of the Troodos massif in Cyprus. The hydrology is driven by a Mediterranean climate, a mountainous topography, and a complex distribution of hydrogeological properties resulting from complex geology. To quantify the regional water balance further, a simple method using continuous streamflow records in the River Limnatis (Kouris catchment) was applied to calculate the actual evapotranspiration rate in the dry seasons. It was found that daily cycles of streamflow, recorded by automatic pressure logger, were caused by direct evaporation from the groundwater table and by transpiration of riparian forest. The daily amounts of ‘missing’ streamflow were calculated for the period 30 October–4 November 2001 and were extrapolated to the entire dry season and to the whole Kouris catchment. The actual evapotranspiration rate from the alluvial aquifer of the region is 2·4 ± 0·5 Mm³ for April–September 2001. The validity of the assumptions and the uncertainties in the estimates used in the method are discussed. Copyright © 2005 John Wiley & Sons, Ltd.