A rooftop tuned mass damper frame

This article documents the analytical study and feasibility of placing a tuned mass damper in the form of a limber rooftop moment frame atop relatively stiff structures to reduce seismic acceleration response. Six existing structures were analytically studied using a suite of time history and response spectra records. The analyses indicate that adding mass in conjunction with a limber frame results in an increase in the fundamental period of each structure. The fundamental period increase generally results in a decrease in seismic acceleration response for the same time history and response spectra records. Owing to the limber nature of the rooftop frames, non‐linear analysis methods were required to evaluate the stability of the rooftop tuned mass damper frame. The results indicate the addition of a rooftop tuned mass damper frame reduces the seismic acceleration response for most cases although acceleration response can increase if the rooftop frame is not tuned to accommodate the specific structure's dynamic behaviour and localized soil conditions. Appropriate design of the rooftop tuned mass damper frame can result in decreased seismic acceleration response. This translates to safer structures if used as a retrofit measure or a more economical design if used for new construction. Copyright © 2003 John Wiley & Sons, Ltd.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

时间谱电阻率法中的剩余电磁效应研究

根据频谱激电（SIP）法或复电阻率（CR）法中研究剩余电磁（REM）效应的思想，通过分析时间谱电阻率（TSR）法中场的基本特征，在TSR法中建立了与SIP（或CR）法中参数Φmax/Φ0max相类似的参数－Emax/E0，用来描述了TSR法中的REM效应。通过对一维可极化大地模型的REM效应的理论计算，验证了用Emax/E0表示的REM异常可用来形象地反映地电断面电阻率的高低。     

煤田火区烧变岩光谱特征分析及其信息提取

中国北方煤田煤层自燃现象非常严重.利用遥感手段可以快速实现火区的动态监测,及时为灭火工程提供信息.烧变岩作为火区的地表指示性特征,是火区解译最直观的信息.本文从烧变岩的反射光谱曲线特征入手,对几种提取烧变岩信息的方法进行比较,从而确定解译烧变岩的最佳方法,为圈定火区的范围和位置奠定基础.     

A Linear Programming Approach to Determine the Normative Composition of Sedimentary Rocks

The analysis of modal and normative composition of sedimentary rocks is widely used for studying their sources and tectonic settings. The normative calculation of the mineral composition of rocks in this study is formulated as a linear programming problem and is solved by means of the simplex method. This enables both simultaneous and successive subtraction of a set of basic minerals from a rock sample represented by its chemical composition {SiO₂...LOI}. Such an approach provides a more exact calculation of the contribution of basic minerals in the rock. This mathematical approach is used to study two representative sets of sandstones and fine-grained rocks from a Meso- to Neoproterozoic marginal basin of southeastern Siberia (Uchur–Maya region, Yakutia) and a Pennsylvanian-Lower Permian uplifted continental block in Colorado, USA. The calculated normative mineral compositions of the Siberian sandstones are consistent with the observed modal compositions. These sandstones vary from K- Feldspar rich arkoses at the base of the sequence (the Uchur Group, lower Riphean) to quartz arenites or lithic sandstones and wacke in transgressive successions of the middle-upper Riphean. Arkoses and quartz arenites are dominant in Meso- to Neoproterozoic Siberia. These samples represent craton interior uplifted basement and quartzose, recycled orogen provenance of a stable craton in Rodinia. There are higher but consistent discrepancies between the calculated and observed compositions for the Pennsylvanian to Lower-Permian arkoses and quartz arenites (Sangre de Cristo, Belden, and Maroon Formations). The differences between the predicted and observed mineralogy may be due to uncertainties in the modes in the matrix and cement of the sandstones. This normative program should supplement modal calculations and provide better genetic constructions, especially in case of matrix-rich sandstones.     

Smoothing and Change Point Detection for Gamma Ray Count Data

Gamma ray detectors are used to measure the natural radioactivity of rocks. For a number of boreholes drilled at a site the gamma ray detector is lowered into each borehole and counts of gamma ray emissions at different depths are recorded as the instrument is gradually raised to ground level. The profile of gamma counts can be informative about the geology at each location. The raw count data are highly variable, and in this paper we describe the use of adaptive smoothing techniques and change point models in order to identify changes in the geology based on the gamma logs. We formulate all our models for the data in the framework of the class of generalized linear models, and describe computational methods for Bayesian inference and model selection for generalized linear models that improve on existing techniques. Application is made to gamma ray data from the Castelreagh Waste Management Centre which served as a hazardous waste disposal facility for the Sydney region between March 1974 and August 1998. Understanding the geological structure of this site is important for further modelling the transport of pollutants beneath the waste disposal area.     

用卫星高光谱数据提取江西德兴铜矿矿山废水的pH值污染指标

在对德兴铜矿矿山废水的光谱特征深入分析研究的基础上,总结了不同类型水体(酸性水、碱性水以及河流水)的特征光谱,并利用地物谱特征开展矿山废水pH值污染指标提取研究。针对水体光谱反射率低、特征光谱不明显的特点,采用矿区卫星Hyperion高光谱数据,应用ISA算法和掩膜技术识别出水体分布并进一步与MNF变换有效结合,根据波段散点图进行不同pH值水体的有效分割。为矿山废水污染的诊断和监测提供了新技术和理论支撑。     

Spectral and Multiscale Signal-to-Noise Thresholding of Spherical Vector Fields

The basic concepts of spectral and multiscale selective reconstruction of (geophysically relevant) vector fields on the sphere from error-affected data is outlined in detail. The reconstruction mechanism is formulated under the assumption that spectral as well as multiscale approximation is well-representable in terms of only a certain number of expansion coefficients at the various resolution levels. It is shown that spectral denoising by means of orthogonal expansions in terms of vector spherical harmonics reflects global a priori information of the noise (e.g., in form of a covariance tensor field), whereas multiscale signal-to-noise thresholding can be performed under locally dependent noise information within a multiresolution analysis in terms of spherical vector wavelets. An application of the multiscale formalism to Earth's magnetic field determination is presented.     

泰山顶部近地层风的方差与谱分析

风在速度与方向上的不稳定性可引发结构振动并可导致损坏。山顶风较少受局地作用影响, 流场较稳定，作为典型风况对山顶风湍流脉动情形进行的观测和分析，对于研究建筑结构风载振动情形有着重要意义。在不同风况下对泰山气象站近地层风的风速和风向进行了同时、逐秒测记，所得样本经检验符合正态分布。计算表明，风向样本方差显著大于风速样本方差。绘制了各风速、风向样本自、互谱密度曲线图。谱图显示诸样本具有红噪声序列特征，不同样本自、互谱密度曲线具有相近形状，而以风速自谱曲线吻合程度最好，谱密度曲线在周期为4秒及2秒处有峰值。此后的研究应结合记录仪器的改进增加采样频率，对周期为2秒以下谱曲线作进一步分析。