高分卫星自然资源调查需求满足度评估

当前高分对地观测数据应用来源众多,且其应用方式各异,如何对需求其进行规范化和结构化的需求综合及聚类,进而开展卫星观测能力对于用户需求的需求满足度进行评估,是当前高分对地观测系统建设及应用的关键.本研究基于层次分析法开展自然资源遥感调查的需求建模与评价研究,以可见光近红外类型的自然资源遥感调查需求为主要研究对象,提取自然...     

Dipping-interface Mapping Using Mode-separated Rayleigh Waves

Multichannel analysis of surface waves (MASW) method is a non-invasive geophysical technique that uses the dispersive characteristic of Rayleigh waves to estimate a vertical shear (S)-wave velocity profile. A pseudo-2D S-wave velocity section is constructed by aligning 1D S-wave velocity profiles at the midpoint of each receiver spread that are contoured using a spatial interpolation scheme. The horizontal resolution of the section is therefore most influenced by the receiver spread length and the source interval. Based on the assumption that a dipping-layer model can be regarded as stepped flat layers, high-resolution linear Radon transform (LRT) has been proposed to image Rayleigh-wave dispersive energy and separate modes of Rayleigh waves from a multichannel record. With the mode-separation technique, therefore, a dispersion curve that possesses satisfactory accuracy can be calculated using a pair of consecutive traces within a mode-separated shot gather. In this study, using synthetic models containing a dipping layer with a slope of 5, 10, 15, 20, or 30 degrees and a real-world example, we assess the ability of using high-resolution LRT to image and separate fundamental-mode Rayleigh waves from raw surface-wave data and accuracy of dispersion curves generated by a pair of consecutive traces within a mode-separated shot gather. Results of synthetic and real-world examples demonstrate that a dipping interface with a slope smaller than 15 degrees can be successfully mapped by separated fundamental waves using high-resolution LRT.     

汶川M_S8.0地震的强余震流动观测

2008年5月12日汶川大地震发生后,中国地震局迅速组织开展了强余震流动观测,沿龙门山断裂附近布设了59台强震动仪器.在观测期间发生了万余次余震,流动观测台网获得了2000多组3分量的强余震记录.本文介绍了流动观测台布设的技术方法与关键步骤,初步处理了2008年5月25日青川6.4级最大余震的地震动记录,并分析了此次地震动衰减特征.此次流动观测充分表明,在大地震发生后,及时有效地开展强震动流动观测是十分必要的,其获得的余震地震动记录可为进一步的科研工作提供宝贵的基础资料.     

利用GPS连续观测资料进行强震危险性预测的探讨

中国地壳运动观测网络基准站自1999运行以来已经积累了8年多的观测资料,目前针对地震预测、观测对象和数据处理方法,广义地提出了"点、线、面"的分析方法。实际应用表明,利用"线"的分析方法可能是比较好的方法,它最大的优点是在恰当的空间范围内不但可降低噪声,而且可突出异态信息。在目前较低测控能力的基础上,可通过全空间扫描与现象分析发现:①距昆仑山口西地震震中最近的德令哈观测站相对于拉萨观测站在震前较早的时间,其EW向就出现了缓慢变化,乃至闭锁(或无差异变化),直至地震发生为止,持续时间超过2年,闭锁数值10 mm以上,震后恢复正常;②云南地区数次强震震前下关观测站相对于泸州观测站EW向出现了闭锁或低于正常的变化,2003年强震之后恢复正常;最近的普洱强震自2006年初EW与SN向均出现了相对闭锁,两个方向的数值分别接近和达到10 mm;此外,每阶段异常的持续时间均超过1年;③塔什—乌什间EW向在新疆巴楚地震前出现了闭锁性活动,时间2年以上,数值约10 mm,震后恢复正常;目前SN向有相对闭锁迹象,并正在趋于明朗;④鼎新—西宁间EW方向有相对闭锁的迹象,但时间尚短;⑤通过寻找相对"闭锁"区段有可能成为判定强震危险性存在与否的主要方法。由此推测,若普洱6.4级地震后闭锁不解除,川滇菱形块体的西边界构造带及周围地区仍是近期强震最有可能发生的地区,其次是新疆的西天山地区,目前青藏高原东北缘尚不明朗。     

地震电磁辐射前兆异常特征和异常指标关系研究

根据收集的地震电磁类资料, 总结分析了地震电磁异常特征及震例的异常指标间的关系。据统计, 一般对M≥ 3.0地震, 电磁异常平均出现在震前10～45天, 异常的平均传播距离为100～600 km, 震级越大, 异常提前出现的时间越早, 异常传播的距离越大; 一定范围内, 震级和异常提前出现的时间、 震级和异常传播的距离存在简单的线性关系。地震发生在异常出现后两个月之内的概率达93.5%。有88%的地震发生在异常结束后或异常结束当天, 有98%的地震发生在异常结束后20天以内。     

“十五”前兆观测模式之嬗变及其应对

随着科学技术的进步,与“九五”相比,“十五”前兆网络项目在观测模式上有了很大的变化,如何适应这种变化？从网络拓扑、仪器的本质、管理及处理软件、数据采集器、安全性等方面详细的分析了其变化并提出了应对方法。     

小波变换方法在辽宁跨断层形变资料分析中的应用

运用二进小波变换方法,分析了辽宁省跨断层观测资料不同尺度的小波变换的细节信号变换特征。研究结果表明,不同尺度小波变换分解的细节信号显示出不同的时变特征,可以识别和提取原始测值中不易分辨的震前异常。当尺度为3时的细节信号的年周期特征被打破,或者当尺度为3时的细节信号变化超出2倍均方差时,测点周围250km左右范围内发生中强地震的可能性很大。     

辽宁省应急流动测震台网技术系统

本文介绍了辽宁省应急流动测震台网的构成以及供电模式、系统集成、数据传输等内容。     

Radon变换在非规则观测系统中波场分离的应用

Radon变换是数据处理中广泛应用的一种方法技术.本文介绍了Radon变换在规则及其非规则观测系统中波场分离中应用,讨论了Radon变换的公式、实现方法和有关计算参数的选择.通过理论模型的试算,阐明了Radon变换在缺失道、道距变化情况下依然可以高精度的分离波场,并对线性、抛物Radon变换进行了比较,对隧道超前预报反射波资料进行了处理,给出了隧道超前预报处理流程中提取反射波的算例.     

2D equivalent linear site effect simulation: example applications to two deep valleys

In the framework of the Sismovalp European project, an equivalent linear 2D code was developed to compute the response of a valley to SH waves, using the discrete wave-number method proposed by Aki and Larner (Aki K, Larner KL (1970) J Geophys Res 75:5). To overcome the frequency upper bound limitation, the Aki and Larner’s method is combined with a one-dimensional computation using a classical multi-layer method (Aki K, Richards PG (1980) Quantitative Seismology: Theory and Methods, vols. 1 & 2. W.H. Freeman & Co, San Francisco). The so-called “Aki–Larner extended method” is associated to an iterative algorithm, as proposed by Seed and Idriss (Seed HB, Idriss IM (1969) Report No. EERC 70–10, Earthquake Research Center, University of California, Berkeley, California) which accounts for the modulus and damping degradation using a linear visco-elastic model. A comparison of the results in the linear and the equivalent linear cases, for a magnitude 6.0 earthquake, shows that the account for the equivalent linear behaviour of the soil significantly reduces the amplification level, especially at frequencies higher than the fundamental resonance frequency of the site. In the case of site effects or microzonation studies devoted to produce design spectra for engineering structures, this can have a major impact on the associated results and costs, depending on the frequency of interest for the considered structure. As a first application of the developed technique, 2D equivalent linear Aki–Larner computations are used to perform the seismic microzonation study of the upper Rhone valley, in the Visp area (Switzerland), a typical 2D alpine valley. These investigations made it possible to determine site specific spectra, associated with different zones, to be used instead of the code spectra that do not take into account the local 2D amplification.