Correcting the Smoothing Effect of Ordinary Kriging Estimates

The smoothing effect of ordinary kriging is a well-known dangerous effect associated with this estimation technique. Consequently kriging estimates do not reproduce both histogram and semivariogram model of sample data. A four-step procedure for correcting the smoothing effect of ordinary kriging estimates is shown to be efficient for the reproduction of histogram and semivariogram without loss of local accuracy. Furthermore, this procedure provides a unique map sharing both local and global accuracies. Ordinary kriging with a proper correction for smoothing effect can be revitalized as a reliable estimation method that allows a better use of the available information.     

基于垂直剖面函数的天顶对流层延迟插值算法

通过分析由ERA-Interim气象再分析资料积分方法得到的天顶对流层总延迟随高程变化的规律,提出一种基于垂直剖面函数的天顶对流层延迟(ZTD)插值算法。该算法以ZTD的垂直分布规律为基础,通过垂直剖面函数实现ZTD在高程方向上的精准投影延拓,可以避免因高差较大造成的空间内插结构畸形。采用IGS站提供的高精度对流层产品进行实验验证表明,该算法相对于传统算法能够有效提高ZTD改正值的精度,尤其在高差超过1 km的情况下,相对于反距离加权法精度提升了96%,相对于空间回归法精度提升了79%。     

Assessing regression‐based statistical approaches for downscaling precipitation over North America

This paper assesses linear regression‐based methods in downscaling daily precipitation from the general circulation model (GCM) scale to a regional climate model (RCM) scale (45‐ and 15‐km grids) and down to a station scale across North America. Traditional downscaling experiments (linking reanalysis/dynamical model predictors to station precipitation) as well as nontraditional experiments such as predicting dynamic model precipitation from larger‐scale dynamic model predictors or downscaling dynamic model precipitation from predictors at the same scale are conducted. The latter experiments were performed to address predictability limit and scale issues. The results showed that the downscaling of daily precipitation occurrence was rarely successful at all scales, although results did constantly improve with the increased resolution of climate models. The explained variances for downscaled precipitation amounts at the station scales were low, and they became progressively better when using predictors from a higher‐resolution climate model, thus showing a clear advantage in using predictors from RCMs driven by reanalysis at its boundaries, instead of directly using reanalysis data. The low percentage of explained variances resulted in considerable underestimation of daily precipitation mean and standard deviation. Although downscaling GCM precipitation from GCM predictors (or RCM precipitation from RCM predictors) cannot really be considered downscaling, as there is no change in scale, the exercise yields interesting information as to the limit in predictive ability at the station scale. This was especially clear at the GCM scale, where the inability of downscaling GCM precipitation from GCM predictors demonstrates that GCM precipitation‐generating processes are largely at the subgrid scale (especially so for convective events), thus indicating that downscaling precipitation at the station scale from GCM scale is unlikely to be successful. Although results became better at the RCM scale, the results indicate that, overall, regression‐based approaches did not perform well in downscaling precipitation over North America. Copyright © 2013 John Wiley & Sons, Ltd.     

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.     

Introducing a new conceptual instantaneous unit hydrograph model based on a hydraulic approach

ABSTRACT

A novel approach is introduced for simulation of instantaneous unit hydrographs (IUHs). The model consists of a series of linear reservoirs that are connected to each other, and is referred to as the inter-connected linear reservoir model (ICLRM). By assuming the flow between two reservoirs is a linear function of the difference between the water levels in the reservoirs, a system of first-order linear differential equations is obtained as the ICLRM governing equation. By solving the equations, the discharge from the last reservoir is considered as an IUH. A small-scale laboratory device was constructed for the simulation of IUHs using the model. By studying four hydrographs extracted from the literature, and simulating them using both the ICLRM and the Nash model, it is concluded that the ICLRM can predict these hydrographs more accurately than the Nash model. Due to the simplicity of the construction and operation of the ICLRM and, more importantly, its visual aspect, the ICLRM may be considered as an effective educational tool for studying IUHs.     

基于等价权抗差估计和线性规划的天线曲面拟合算法

现有天线曲面拟合算法均基于最小二乘法,难以消除多个粗差对拟合结果的影响。本文基于等价权抗差估计思想,利用线性规划计算残差初值,再进行选权迭代计算。通过算例,证明本文方法能较好地探查多个粗差,且计算结果精度更高。     

Integrating ASTER and GLASS broadband emissivity products using a multi-resolution Kalman filter

In this study, the multi-resolution Kalman filter (MKF) algorithm, which can handle multi-resolution problems with high computational efficiency, was used to blend two emissivity products: the Global LAnd Surface Satellite (GLASS) (BBE) product and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) narrowband emissivity (NBE) product. The ASTER NBE product was first converted into a BBE product. A new detrending method was used to transfer the BBEs into a process suitable for the MKF. The new detrending method was superior to the two existing methods. Finally, both the de-trended GLASS and ASTER BBE products were incorporated into the MKF framework to obtain the optimal estimation at each scale. Field measurements collected in North America were used to validate the integrated BBEs. Visually, the fusion map showed good continuity, with the exception of the border areas, and the quality of the fusion map was better than that of the original maps. The validation results indicate that the MKF improved the BBE product accuracy at the coarse scale. In addition, the MKF was capable of recovering missing pixels at a finer scale.     

中国地面气温统计降尺度预报方法研究

利用中国752个基本、基准地面气象观测站2000—2010年地面温度日值数据,采用具有自适应特征的Kalman滤波类型的递减平均统计降尺度技术,对中国地面温度进行精细化预报研究。分析该方案的降尺度效果,并与常用插值降尺度方法进行比较。结果表明:1)递减平均统计降尺度技术相比插值方法有较大的提高,显著减小东西部预报效果差异,1~3 d预报的均方根误差减小了1.4℃;2)该方案1~3 d预报的均方根误差为1.5℃,预报误差从东南地区(均方根误差为1.4℃)向西北地区(均方根误差为1.8℃)逐渐增大,并且预报效果夏季优于冬季。因此,递减平均统计降尺度技术对中国地面温度进行精细化预报是可行的。     

线图形简化与移位算子的协同方法

在地图综合过程中,线的图形简化和移位算子通常是分别执行的,图形简化和移位有时都会产生新的空间冲突。本文试图把这两种算子进行协同,避免在地图综合过程中进行空间冲突的多次探测,提高地图综合数据处理的效率。本文通过把线图形简化转换为线上的点移位,并构建邻近地图目标之间的移位传播路径,在考虑空间上下文关系和地图感受规则的前提下,使移位过程能考虑到线图形简化,并尽量保持有关地图目标的空间特征。最后,以道路和其周边的建筑物群为例,验证了该算法的有效性和可行性。