Separate Analysis of Remote Sensing Information of Structures of Different Geological Periods and Quantitative Study of Corresponding Tectonic Stress Fields

The structural feature shown on a remote sensing image is a synthetic result ofcombination of the deformations produced during the entire geological history of an area.Therefore, the respective tectonic stress field of each of the different stages in the complexdeformation of an area can be reconstructed in three steps: (1) geological structures formed atdifferent times are distinguished in remote sensing image interpretation; (2) structuraldeformation fields at different stages are determined by analyzing relationships betweenmicrostructures (joints and fractures) and the related structures (folds and faults); and (3)tectonic stress fields at different stages are respectively recovered through a study of the featuresof structural deformation fields in different periods. Circular structures and related circlular and radial joints are correlated in space to con-cealed structural rises. The authors propose a new method for establishing a natural model ofthe concealed structural rises and calculating the tectonic stress field by using quantitative dataof the remote sensing information of circular structures and related linear structures.     

胶东涧里金矿床地质特征及找矿方向

论述了涧里金矿区地质概况及矿床地质特征，对矿床成因进行了探讨，并在此基础一进行了臧放预测，提出了今后找矿方向     

Structural features and petroleum geology of the fold-thrust belt in the southern Tarim basin, China

The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of the fold-thrust belts reveal their different structural and petroleum features and mechanisms. WKFTB differs from AFTB by abundant fault-related folds and triangles zones, and was formed by northward extrusion of the west Kunlun orogen. AFTB was affected synchronously by northward extrusion of the Altun orogen and the sinistral strike-slipping of the Altun Fault, so it is characterized by the minor scale and the monotonous structural styles. The Aqike anticline and the Aqike fault, of which the strikes are orthogonal to the strike of the fold-thrust belts, are regarded as the adjustive structures between both of the fold-thrust belts. The oil-gas pools of WKFTB develop mainly in the faulted-related anticline traps, but the oil-gas pools of AFTB develop mainly in the low fault-block and anticlines traps related with the paleo-uplifts. There are different exploration countermeasures for both of the fold-thrust belts.     

电子地图中线状要素移动注记关键问题研究

探讨了电子地图移动注记的几个关键问题 ,提出了将分段注记和移动注记相结合的思想 ,并在此基础上提出了采用回溯法解决注记之间的冲突 ,从而较好地解决了图幅移动之后某些屏幕内线状要素注记不可见或表达模糊的问题 ,实现了注记输出的完整性和美观性的统一 ,提高了图形输出的效率 ,节省了存储空间 ,在实际应用中取得了较好的效果 ,充分体现了电子地图在线状要素注记显示这一环节的优越性     

青海省地质特征及典型地质标本采集经验

地质标本是地史演化和地学研究的见证物,同时也是地质宣传和教学的基础资源和核心材料。以习近平新时代生态文明建设思想为指导,对青海省地质特征及典型地质标本采集经验进行深入分析和讨论。研究结果表明青海省处于不同时期规模巨大的造山系中,区域地质活动强烈,经过亿万年的地质演化,形成了丰富的具有典型性和代表性的地质标本。典型地质标本采集时可重点考虑北祁连蛇绿岩、中南祁连构造糜棱岩、柴北缘花岗伟晶岩、西秦岭矽卡岩、青南流纹岩和不同地质年代形成的化石等地质体。同时此次在采集地质标本时得出的宝贵经验,对于今后深入剖析省内地层时空接触关系和构造活动特征、揭示地层演化历史和矿藏分布规律、以及为吸引更多的国内外地学爱好者提供了具有高原特色的新场景和新生态。     

云南澜沧老厂银铜铅锌矿床地质特征及成因研究

云南澜沧老厂银铜铅锌多金属矿床为我国西南三江地区著名的多金属矿床,对该矿床的成矿地质背景、矿床地质特征、围岩蚀变特征以及矿床分带特征进行了详细的论述,对众说纷纭的矿床成因进行了总结。     

柴达木盆地英雄岭地区新生代构造演化动力学特征

通过分析柴达木盆地英雄岭 (YL)地区地质、2D/ 3D地震、遥感、重磁电和钻探等资料 ,提出了喜马拉雅运动几个阶段在该区的构造动力学响应特征。研究认为喜马拉雅运动晚期 ,英雄岭地区西南侧的阿卡腾能山因近SN向的区域挤压作用 ,产生了顺时针方向的旋转及隆升作用 ,从而在干柴沟一带形成了强烈的SE向局部挤压应力场 ,基底大幅隆升 ,而在英雄岭隆起的南侧则产生了局部的拉张构造环境。喜马拉雅山中期运动在该区的主要表现形式就是使古近纪的张扭构造环境转变为新近纪的坳陷构造环境 ,英雄岭西南的阿尔金地区发生隆升作用 ,沉积中心发生向东和向北的迁移。通过分析主干断裂、构造块体和沉积凹陷的分布特征等 ,得出喜马拉雅早期英雄岭及邻区发育局部拉张环境 ,为较为稳定的断陷湖盆发育期 ,沉积了一套优质烃源岩。英雄岭地区潜在勘探领域主要有构造裂缝型圈闭、地层岩性圈闭及渐新世断凸构造圈闭等。     

青藏高原地球动力学初探

青藏高原是当今世界上最高、最大和最年轻的高原。青藏高原的地球动力学研究是一个复杂而饶有兴趣的问题。本文试图从高原的范围、地球物理特征、地震活动、构造演化和新构造运动等方面探讨其地球动力学过程。 从新构造分析,笔者着重指出,青藏高原是欧亚大陆板块中最活动的一个块体,它在造就中国乃至东亚新构造运动的格局方面,是一个十分重要的因素。     

Method of Data Reduction and Uncertainty Estimation for Platinum-Group Element Data Using Inductively Coupled Plasma-Mass Spectrometry

A data reduction method is described for determining platinum-group element (PGE) abundances by inductively coupled plasma-mass spectrometry (ICP-MS) using external calibration or the method of standard addition. Gravimetric measurement of volumes, the analysis of reference materials and the use of procedural blanks were all used to minimise systematic errors. Internal standards were used to correct for instrument drift. A linear least squares regression model was used to calculate concentrations from drift-corrected counts per second (cps). Furthermore, mathematical manipulations also contribute to the uncertainty estimates of a procedure. Typical uncertainty estimate calculations for ICP-MS data manipulations involve: (1) Carrying standard deviations from the raw cps through the data reduction or (2) calculating a standard deviation from multiple final concentration calculations. It is demonstrated that method 2 may underestimate the uncertainty estimate of the calculated data. Methods 1 and 2 do not typically include an uncertainty estimate component from a regression model. As such models contribute to the uncertainty estimates affecting the calculated data, an uncertainty estimate component from the regression must be included in any final error calculations. Confidence intervals are used to account for uncertainty estimates from the regression model. These confidence intervals are simpler to calculate than uncertainty estimates from method 1, for example. The data reduction and uncertainty estimation method described here addresses problems of reporting PGE data from an article in the literature and addresses both precision and accuracy. The method can be applied to any analytical technique where drift corrections or regression models are used.