一次强飑线过程极端大风的中尺度分析

利用常规气象观测资料、区域自动气象站加密观测资料和GFS 0.25°×0.25°逐6 h的分析场数据以及多普勒雷达、风廓线等资料,通过背景形势场分析、物理量诊断分析和中尺度分析,对2018年3月4日发生在华东地区的强飑线天气过程进行了诊断分析。结果表明,这次过程具有发生时间(季节)早、移速快、范围广、致灾强等特点,是一次比较少见的早春(冬末)十分强烈的飑线天气过程,是在高空急流辐散区、低空西南急流轴前端、低涡南侧的暖区中发展起来的。飑线过程的地面要素变化十分剧烈,地面有强冷池,与飑线前暖空气之间构成了强的水平温度梯度,致使飑线强度更强;飑线经过时气压涌升所形成的雷暴高压、强气压梯度以及飑线的快速移动均有利于地面极端大风的出现。飑线发展过程中观测到弓形回波、超级单体等强天气系统。中高层动量下传和光滑湖面、喇叭口、狭管效应等特殊地形对于大风的增强效应比较显著,这些因素也加剧了地面极端大风的形成。      

CINRAD-SA双偏振雷达资料在降水估测中的应用初探

对基于水平反射率ZH和差分传播相移率K_(DP)的降水估测综合法R(C)进行了改进,并对广州S波段双偏振雷达2016年2次飑线和2次台风降水过程的Φ_(DP)使用小波分析进行滤波处理,在此基础上使用变距最小二乘法拟合得到K_(DP)的值。分别使用R(C)和R(Z_H)法对2次飑线和2次台风降水过程进行降水估算,将估算结果和雨量计小时雨量进行了对比,并将两种方法的评估结果进行了对比。结果表明:(1)对于飑线类型降水,R(C)法对5 mm·h~(-1)以上的降水估测精度要好于R(Z_H)法,且降水率越大,R(C)法优势越明显,当降水率≥20 mm·h~(-1)时,两次过程R(C)法比R(Z_H)法的平均相对误差(RE)降低了17. 2%,平均绝对误差(AE)减少了1.89 mm,平均均方根误差(RMSE)减少了1.66 mm;(2)对于台风类型降水,R(C)法对5 mm·h~(-1)以上的降水估测精度也好于R(Z_H)法,当降水率≥20 mm·h~(-1)时,两次过程R(C)法比R(Z_H)法的平均RE降低了33. 19%,平均AE减少了3. 95 mm,平均RMSE减少了4.05 mm;(3)对于飑线和台风两种类型降水R(C)法都明显改善了降水率较大时的R(Z_H)法低估问题,但R(C)法在降水率10 mm·h~(-1)时也存在低估,可能是由雨滴谱资料观测误差导致拟合的系数偏小或雷达硬件造成的观测偏差等造成的。     

2018年一次罕见早春飑线大风过程演变和机理分析

2018年3月4—5日,华南、江南等地发生了一次大范围强对流过程,发生时间早,落区范围广,多地伴有雷暴大风、冰雹、短时强降水等剧烈对流天气,尤其飑线在江西境内造成了严重大风灾害。基于大气环流和雷达回波发展演变特征,将该次过程分为初始、发展和减弱三个阶段：初始阶段西风槽前西南急流造成的低压倒槽为强对流提供大尺度触发条件;发展阶段对流活动位于槽前暖区中,飑线在江西造成极端大风;入夜后,冷锋南下,对流进入减弱阶段。环境场及对流参数诊断表明江西中北部低层高温高湿,中层干冷,温度垂直递减率大,有利于产生雷暴大风。南昌探空长时间序列分析表明温湿要素气候态异常,与历史同期比,低层明显偏暖偏湿,中层偏干,有利于极端对流天气发生。综合多源观测资料和雷达资料分析中小尺度特征,本次江西飑线过程特点及成因包括：（1）受引导气流和前向传播共同作用,飑线移动速度快。（2）自动站分析显示飑锋后雷暴高压强,与锋前暖低压作用造成强密度流,有利于产生大范围直线型大风;（3）通过对比飑线弓状回波南北段回波结构差异表明,飑线后侧中层干后向入流促使降水粒子相变,剧烈降温形成的强下沉运动(下击暴流)是导致极端大风的主要原因,后部层云区下沉气流增强雷暴高压加之动量下传作用对雷暴大风有增幅作用。     

基于Delaunay三角网的河流中线提取方法

鉴于水系自动综合中河系数据模型建立的复杂性,利用ArcObject提供的组件在双线河和狭长湖泊间构建约束的Delaunay三角网,继而提取其骨架线,从而得到双线河和狭长湖泊的中轴线,之后进行拓扑关系的保持,有效地简化了水系数据模型的建立,为后续的空间分析打下基础。     

APPLICATION OF UNIT HYDROGRAPH TECHNIQUES TO SOLUTE TRANSPORT IN CATCHMENTS

Current models of solute movement in catchments are based on rainfall–runoff models and are consequently biased towards processes which determine the magnitude and timing of water flux. It is shown here that the instantaneous unit hydrograph (IUH), or runoff response function, obtained from a hydrograph is fundamentally different from the residence time distribution which governs the response to solutes/tracers. Using hydrometric and tracer data obtained from a small (25 ha) catchment in the humid tropics a modification of the IUH technique is demonstrated which also allows approximate modelling of the tracer data. New features of the modified conceptual model are identified with known hillslope processes.     

UNIT HYDROGRAPH DERIVED FROM A SPATIALLY DISTRIBUTED VELOCITY FIELD

A unit hydrograph model is proposed in which the watershed is decomposed into subareas which are individual cells or zones of neighbouring cells. The unit hydrograph is found for each subarea and the response at the outlet to excess rainfall on each subarea is summed to produce the watershed runoff hydrograph. The cell to cell flow path to the watershed outlet is determined from a digital elevation model. A constant flow velocity is assigned to each cell and the time lag between subarea input and response at the watershed outlet is found by integrating the flow time along the path from the subarea to the outlet. The response function for a subarea is modelled as a lagged linear reservoir in which the flow time is equal to the sum of a time of translation and an average residence time in the reservoir. It is shown that the assumption of a spatially varying, but time-invariant, velocity field underlying this model produces a linear system model for all subareas whose outputs can be summed in the manner indicated. An example application is presented for the 8.70 km² Severn watershed at Plynlimon in Wales using a 50 m digital elevation model in which the cell velocity is calculated by modifying an average watershed velocity according to the terrain slope and the drainage area of each cell. The resulting model reasonably reproduces the observed unit hydrograph.     

APPLICATION OF A GROUPED RESPONSE UNIT HYDROLOGICAL MODEL TO A NORTHERN WETLAND REGION

Applications of hydrological models to northern wetland-dominated regions have been limited in the past to a few case studies on small basins employing ‘lumped’ models. Only recently have there been attempts to apply the grouped response unit (GRU) distributed modelling approach using terrain classifications to these same basins. This study summarizes recent efforts in applying such a model. For the purposes of implementing the GRU approach, terrain types that are hydrologically significant and characteristic to the wetland-dominated regime were successfully discriminated using a principal component analysis and a hybrid unsupervised/supervised classification technique on Landsat–Thematic Mapper imagery. The terrain classifications were then used as input into a distributed hydrological model for calibration and validation using recorded spring runoff events. Preliminary model applications and results are described. Calibration to a historic spring runoff event yielded an r² value of 0.86. Model validation, however, yielded much poorer results. The problems of model applicability to this region and limitations of sparse data networks are highlighted. The need for more field research in this type of hydrological regime, and associated improvements to the model parameter set are also identified.     

FLOOD MODELLING WITH GIS-DERIVED DISTRIBUTED UNIT HYDROGRAPHS

The concept of a spatially distributed unit hydrograph is based on the fact that the unit hydrograph can be derived from the time–area curve of a watershed by the S-curve method. The time–area diagram is a graph of cumulative drainage area contributing to discharge at the watershed outlet within a specified time of travel. Accurate determination of the time–area diagram is made possible by using a GIS. The GIS is used to describe the connectivity of the links in the watershed flow network and to calculate distances and travel times to the watershed outlet for various points within the watershed. Overland flow travel times are calculated by the kinematic wave equation for time to equilibrium; channel flow times are based on the Manning and continuity equations. To account for channel storage, travel times for channel reaches are increased by a percentage depending on the channel reach length and geometry. With GIS capability for rainfall mapping, the assumption of a uniform spatial rainfall distribution is no longer necessary; hence the term, spatially distributed unit hydrograph. An example of the application for the Waiparous Creek in the Alberta Foothills is given. IDRISI is used to develop a simple digital elevation model of the 229 km² watershed, using 1 km × 1 km grid cells. A grid of flow directions is developed and used to create an equivalent channel network. Excess rainfall for each 1 km × 1 km cell is individually computed by the Soil Conservation Service (SCS) runoff curve method and routed through the equivalent channel network to obtain the time–area curve. The derived unit hydrograph gave excellent results in simulating an observed flood hydrograph. The distributed unit hydrograph is no longer a lumped model, since it accounts for internal distribution of rainfall and runoff. It is derived for a watershed without the need for observed rainfall and discharge data, because it is essentially a geomorphoclimatic approach. As such, it allows the derivation of watershed responses (hydrographs) to inputs of various magnitudes, thus eliminating the assumption of proportionality of input and output if needed. The superposition of outputs is retained in simulating flood hydrographs by convolution, since it has been shown that some non-linear systems satisfy the principle of superposition. The distributed unit hydrograph appears to be a very promising rainfall runoff model based on GIS technology.     

一种拓扑保持的折线简化算法研究

通过分析Douglas-Peucker折线简化算法之不足,提出了一种基于二叉树数据结构的折线简化算法,解决了传统算法的自相交问题。对于GIS数据简化压缩及制图综合具有很高的实用价值。     

上海市城乡实体地域的划分

正确的城乡划分,并以此为依据统计城镇人口,是社会经济统计的重要组成部分,城乡划分方法的研究在理论和现实两方面都具有重要的意义。利用上海市2000年的航空遥感影像和人口普查地理信息系统,作了实验性的城乡实体地域划分。特别对上海市主城区、郊区青浦区、远郊金山区张堰镇三种类型的城镇实体地域,作了较详细的划分方法探讨,以此来分别模拟国内大城市、中小城市和小城镇的实体地域划分。 本文分步骤介绍了各类型城乡实体地域划分的基本过程,同时对每种类型实体地域的多种精度的结果进行比较研究,分别探讨大城市、中小城市和城镇三种类型的实体地域划分在近远期分别应达到的精度。精度合适、操作简便,是本次研究的重点,目的是为了将城镇实体地域划分工作在大范围内推广。