切磨过程中花岗石材料去除机理研究

深入理解切磨过程中花岗石材料的去除机理是优化加工设备，加工工具以及加工参数的基础。本文研究了花岗石的断口表面、锯切表面、粗磨表面以及精磨表面形貌特征，并结合切磨过程中临界载荷、单颗金刚石磨粒所承受的切削力以及比能特征，对加工表面形成机理进行了分析。研究表明，材料的去除机理与单颗磨粒的最大切削厚度直接相关。随着单颗金刚石磨粒最大切削厚度的减小、花岗石的去除方式也逐渐由脆性断裂为主转为塑性流变为主。由于不同的材料去除机制对应不同的能量消耗，可以通过调节单颗磨粒的最大切削厚度控制材料的去除方式，进而控制能量消耗。因此，均匀的磨粒出露高度对于控制切磨过程中材料的去除机理和优化加工过程具有重要意义。     

Adjusting stream-sediment geochemical maps in the Austrian Bohemian Massif by analysis of variance

The Austrian portion of the Bohemian Massif is a Precambrian terrane composed mostly of highly metamorphosed rocks intruded by a series of granitoids that are petrographically similar. Rocks are exposed poorly and the subtle variations in rock type are difficult to map in the field. A detailed geochemical survey of stream sediments in this region has been conducted and included as part of the Geochemischer Atlas der Republik Österreich,and the variations in stream sediment composition may help refine the geological interpretation. In an earlier study, multivariate analysis of variance (MANOVA) was applied to the stream-sediment data in order to minimize unwanted sampling variation and emphasize relationships between stream sediments and rock types in sample catchment areas. The estimated coefficients were used successfully to correct for the sampling effects throughout most of the region, but also introduced an overcorrection in some areas that seems to result from consistent but subtle differences in composition of specific rock types. By expanding the model to include an additional factor reflecting the presence of a major tectonic unit, the Rohrbach block, the overcorrection is removed. This iterative process simultaneously refines both the geochemical map by removing extraneous variation and the geological map by suggesting a more detailed classification of rock types.     

乌鲁木齐河源冰川物质平衡季节变化和总消融海拔分布

消融期前冰川积累量随海拔线性增加，消融期冰川总消融随海拔线性减少。季节零平衡线的移动和正积温密切相关。根据总消融率和冰川面积随海拔的分布，计算了冰川融水量随海拔的分布。冰川平衡线，平均消融线和平均海拔线相互接近。平衡线可作为估算冰川融水量的一个标准位置。     

Censoring and edge effects in areal and line transect sampling of rock joint traces

This paper reviews techniques for correcting for bias incurred when incomplete observations form part of a data set. The similarities and differences between biases due to censoring and edge effects are emphasized, the latter being of importance when the distribution of joint traces is estimated from an exposure. A new technique for analyzing line transect data is presented, and a new analysis of published data on joint trace lengths given.     

Terrain generalization with line integral convolution

ABSTRACT

Line integral convolution is a technique originally developed for visualizing vector fields, such as wind or water directions, that places densely packed lines following the direction of movement. Geisthövel and Hurni adapted line integral convolution to terrain generalization in 2018. Their method successfully removes details and retains sharp mountain ridges; it is particularly suited for creating generalized shaded relief. This paper extends line integral convolution generalization with a series of enhancements to reduce spurious artifacts, accentuate mountain ridges, control the level of detail in mountain slopes, and preserve sharp transitions to flat areas. The enhanced line integral convolution generalization effectively removes excessive terrain details without changing the position of terrain features. Sharp mountain ridgelines are accentuated, and transitions to flat waterbodies and valley bottoms are preserved. Shaded relief imagery derived from generalized elevation models is visually pleasing and resembles manually produced shaded relief.     

线元点位误差带的“纺锤形”模型

对当前GIS界流行的以点位误差描述线元位置不确定性的误差带理论提出相反的观点。最早提出的线元误差带理论为"ε-带"模型,后来又提出了"E-带"模型和在其基础上发展的"G-带"模型。后两者均认为以控制点点位误差描述的线元的误差带的基本形状呈"哑铃"形,即认为线元上端点的位置不确定性大于端点之间的点的位置不确定性。笔者的看法与此相反,笔者认为线元上两控制点之间的点的位置不确定性应大于控制点的位置不确定性,且在两控制点的中间达到最大,即线元误差带的基本形状应为"纺锤形"而不是"哑铃形"。     

两系杂交稻制种生产的气候生态诊断技术

两系杂交稻制种生产对气候生态条件有严格要求,确定制种生产基地时应当先对当地的气候生态适宜性进行科学地诊断与评估。该文系统地分析了气候生态条件对两系杂交稻制种生产的特定影响,提出了制种生产上应注重的两段气候生态安全期概念,研究了两段安全期的诊断评估方法,研制出了两系杂交稻种子生产时空择优气候服务系统,并据此确定了湖南全省两系杂交稻种子生产的适宜区域与时段。2000年初,湖南省有关部门采纳了此项建议,进一步规范了全省的两系制种生产管理。     

大口径瓦斯地质孔钻探技术

运用非平衡钻探工艺理论，对煤矿瓦斯地层进行大口径钻孔的钻探，使目标层富集的高压瓦斯经抽放后得到释压，确保煤矿安全生产。在针对小构造带形成的角砾岩、松散煤层、不稳定地层等瓦斯地质条件下，采用中压风作为冲洗介质进行钻探中所存在的问题，重新设计了新型的钻具级配、正反向一体化钻头等，并且对风介质的排渣机理进行了阐述和分析。同时，就实践中遇到的问题和解决方法进行了总结。     

AutoCAD平台上数字线划图的建库方法研究

通过对建立在AutoCAD平台上的数字线划图图元数据格式的探测 ,提取各类地理信息 ,在通用关系数据库系统中建立矢量数据库 ,并实现数字线划图中各种图元数据的自动入库及图元与数据库记录的链接 ,为目前存于AutoCAD平台下的数字线划图直接转入GIS提供了一种有效的方法     

海洋测深网平差模型的可靠性分析

给出了海洋测深网平差模型在观测值等精度独立条件下的可靠性计算公式，理论分析指出，当检查线数小于3时，模型可靠性不好。对此，提出了一种适用于检查线数小于3的改化模型。并分析了1：1万比例尺3种水深图幅网结构的可靠性，指出检查线与测深线长度比为10%～15％对确定测深网的可靠性较为合适。