黄海表面水温场的准周期变化分析

本文用能谱方法分析了黄海的海表面水温(SST)场的准周期变化。由分析结果清楚地看出,SST具有高频准周期变化:黄海北部以2.6—3.2,1.4—1.7,3.6—3.8和6.7个月的准周期为主;3.3—3.6,5,1.3—2.3及6.7个月在黄海南部占优势。同时,两个海域都有6.7和3.3年的明显的准周期变化。     

分潮波模型多资料数值计算方法研究 Ⅱ.有限差分最小二乘方法

对含多资料的分潮波模型的超定问题进行探讨，建立一种有限差分—最小二乘方法，该方法使得岸边资料直接进入了计算方程，并保证岸界法向流速为零条件。通过对渤海的四大分潮的试算，证实本方法可行。     

Analysis of Mixing of Pollutants in Water Waves and Currents

A vertical two-dimensional turbulence numerical model for the interaction of waves and currents is developed in the paper based on the nonlinear two-equation k-ε model with the VOF method.The one-dimensional equivalent advection velocity and equivalent mixing coefficient are defined and the solving process is introduced:The pollutant concentration field,generated by an instant source in waves and currents,is calculated with the model,and then the equivalent advection velocity and equivalent mixing coefficient are obtained by calculating the time derivative of the mean and variance of pollutant concentration probability distribution.The effects of wave period and wave height on the equivalent mixing coefficient for waves and wave-currents are also investigated.     

Numerical Study on Instantaneous Discharge of Unsorted Particle Cloud in Cross Flow

The mixing characteristics of particles such as dredged sediment of variable size discharged into cross flow are studied by a 3D numerical model, which is developed to model the particle-fluid two-phase flow. The Eulerian method with the modified k-ε parameterization of turbulence for the fluid phase is used to solve fluid phase, while a Lagrangian method for the solid phase (particles), both the processes are coupled through the momentum sources. In the model the wake turbulence induced by particles has been included as additional source term in the k-ε model; and the variable drift velocities of the particles are treated efficiently by the Lagrangian method in which the particles are tracked explicitly and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumping a cloud of particles is governed by the total buoyancy of the cloud, the drag force on each particle and the velocity of cross-flow. The computed results show a roughly linear relationship between the displacement of the frontal position and the longitudinal width of the particle cloud. The particle size in the cloud and the velocity of cross flow dominate the flow behavior. The computed results are compared with the results of laboratory experiments and satisfactory agreement is obtained.     

Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.     

Research on the spectral analysis and test method of period signals in monthly mean sea level

Ｒｅｓｅａｒｃｈｏｎｔｈｅｓｐｅｃｔｒａｌａｎａｌｙｓｉｓａｎｄｔｅｓｔｍｅｔｈｏｄｏｆｐｅｒｉｏｄｓｉｇｎａｌｓｉｎｍｏｎｔｈｌｙｍｅａｎｓｅａｌｅｖｅｌ￥ＭａＪｉｒｕｉ；ＴｉａｎＳｕｚｈｅｎ；ＺｈｅｎｇＷｅｎｚｈｅｎａｎｄＣｈａｉＸｉｎｍｉｎ（Ｒ...     

A model of the formation and development of ocean shear wave

Ａｍｏｄｅｌｏｆｔｈｅｆｏｒｍａｔｉｏｎａｎｄｄｅｖｅｌｏｐｍｅｎｔｏｆｏｃｅａｎｓｈｅａｒｗａｖｅ￥ＱｉａｏＦａｎｇｌｉａｎｄＺｈａｎｇＱｉｎｇｈｕａ（ＦｉｒｓｔＩｎｓｔｉｔｕｔｅｏｆＯｃｅａｎｏｇｒａｐｈｙ，ｓｔａｔｅｏｃｅａｎｉｃＡｄｍｉｎｉｓ...     

南海輓近海平面变化与构造升降初步研究

揭示南海輓近海平面变动和古岸线诸多遗迹,探讨晚更新世以来海平面变化一般规律,初步分析南海周缘中全新世和现代地壳构造升降速率,得出本区海平面上升率适中参考值为0.10—2.0mm/a,初步估算未来50年内海平面变化趋势在1.26—4.0mm/a之间;而构造升降受块断差异运动控制,一般规律是南海北部沿岸自东向西递减,由福建南部1.15mm/a至海南岛南部0.54mm/a。近代地壳形变资料亦证实这种变化规律。     

Factors involved in growth plasticity of cockles Cerastoderma edule (L.), identified by field survey and transplant experiments

In Arcachon Bay, a macrotidal coastal lagoon in southwest France, growth rates of cockles Cerastoderma edule (L.) differ greatly between locations. Sampling of populations at different tidal levels showed that the mean shell length was significantly and positively correlated with immersion time, whereas no correlation was found with population density and microphytobenthos biomass. Transplants of cockles between two intertidal sites were used to examine the relative importance of habitat and site of origin for growth rate and condition index. Artifacts due to manipulation were assessed, i.e. the impact of enclosures on growth, conditon index and mortality. During a 5-mo reciprocal transplant experiment, growth rates of the transplanted cockles and the cockles already present were similar, whereas the sites of origin did not affect growth rate. Condition index, however, displayed significant differences in relation to both transplant and origin sites. During a further 6-mo experiment in which cockles were transplanted from one site to four new sites, growth was mainly influenced by tidal level. These results indicate that net growth started when cockles were immersed 30% of the time. It is concluded that, on the scale of Arcachon Bay (156 km²), differences in growth and condition between cockle populations are largely phenotypic. Tidal level (i.e. food supply and emersion stress) accounts for most of these differences, but the existence of genetically or physiologically different populations cannot be excluded.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.