转炉钢渣对两种对虾幼虾的急性毒性效应

初步研究了一定粒径的转炉钢渣对日本对虾（Penaeus japonicus）幼虾和中国明对虾（fenneropenaeus chinensis）幼虾的急性毒性效应。实验结果显示，当钢渣质量浓度为1.8g／L时，日本对虾幼虾96h的最高死亡率为33．33％；随着钢渣质量浓度的增加，死亡率增高；当钢渣质量浓度为18g／L时，其96h的最大死亡率达到了75％。相对于日本对虾幼虾，钢渣质量浓度为18g／L时中国明对虾幼虾96h的最高死亡率只有36．67％。运用直线内插法求出钢渣对日本对虾幼虾96h半致死浓度为1．62g／L，钢渣对日本对虾的安全浓度为0．162g／L，而在实验条件下中国明对虾幼虾的半致死浓度要明显高于日本对虾幼虾。     

台湾海峡中、北部上升流区浮游有孔虫的生态研究

分析１９８７—１９８８年在台湾海峡中、北部用浮游生物网采集的水层中的浮游有孔虫标本，研究调查海区浮游有孔虫的生态分布特征及其与海水温度和盐度的关系。结果表明：该海区浮游有孔虫计有１６种，以泡抱球虫Ｇｌｏｂｉｇｅｒｉｎａｂｕｌｌｏｉｄｅｓ为主要优势种类，其次是袋拟抱球虫Ｇｌｏｂｉｇｅｒｉｎｏｉｄｅｓｓａｃｃｕｌｉｆｅｒ和红拟抱球虫Ｇ．ｒｕｂｅｒ。在夏季的７月和８月（特别是７月），浮游有孔虫密集在福建中部沿岸的南日岛至闽江口外海海域一带沿岸水域，其中９０％以上的个体由泡抱球虫组成。此现象推测与夏季出现在福建沿岸的上升流活动有关。     

氮浓度对四株海洋绿藻总脂含量和脂肪酸组成的影响

本文用NaNO3作为氮源,分别作了氮浓度的五个水平对2属(小球藻属、裂丝藻属)的四株绿藻的生长率、总脂含量及主要脂肪酸组成的影响。C19、C97和C102的脂肪含量随N浓度的改变而有较大变化,其中C102在1.6m mol/L时脂肪含量达到最大值(24.8%)。C95的脂肪含量随氮浓度变化不大。同时,由氮浓度引起的平均生长率μ与总脂含量之间无明显相关关系。四株绿藻的EPA(20∶5n-3)和PUFAs(polyunsaturated fatty acids)含量随培养基中氮浓度的改变有较大变化但因种而异。C95和C97均在中等氮浓度时EPA含量达到最大值,分别为23.8%和27.4%。C19和C102在高氮浓度(40mmol/L)获得EPA的最大值,分别为25.7%和26.6%。     

含沙量对草地坡面径流泥沙沉积和水力特性的影响

通过室内模拟试验,在坡度为3°和9°、流量为20和60L/min条件下研究了不同浓度(0～350kg/m3)含沙水流流经草地的泥沙沉积过程及其水力学特性。结果表明,坡面泥沙沉积量随含沙量的增加而增大,3°时泥沙沉积率与含沙量呈正相关,而9°时沉积率与含沙量呈反势。坡度对泥沙沉积影响显著,而在相同坡度条件下,两种流量试验的泥沙沉积量无明显差异。相同坡面坡上部位流速小于坡下部位,且含沙量对坡面流速影响较小。在相同坡度和流量条件下,水流雷诺数随含沙量的增大而减小。3°时水流阻力系数和曼宁糙率均随含沙量的增加而增大,而9°时含沙量对阻力影响不明显,因此在土壤侵蚀较严重地区进行坡面水文过程演算时需考虑含沙量对缓坡糙率的影响。     

全站仪交汇法在高速公路路面沉降监测中的应用

文章介绍了全站仪交会法沉降监测,方便简洁地解决了测量人员不能进入的高速公路等特殊位置的测量问题,并通过对该方法的精度分析,论证了其可行性和有效性,对以后类似的测量工作提供经验和依据。     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。     

氮气、氧气和空气水合物的合成及其拉曼光谱特征

在-20℃和不同的压力下,在实验室内分别合成了氮气水合物(16MPa)、氧气水合物(13MPa)和空气水合物(15MPa),并对其N—N和O—O键伸缩振动的拉曼光谱特征进行了研究。结果表明,人工合成的水合物中的N—N和O—O键的拉曼位移与天然的空气水合物中的数据十分接近。在氮气水合物和空气水合物中,N—N键的拉曼峰值均为2322.4cm-1;O—O键的拉曼峰值在氧气水合物和空气水合物保持一致,均为1547.8cm-1。空气水合物分解的拉曼谱图表明,它不是氮气水合物和氧气水合物组成的混合物,而是由氮分子和氧分子共同生成的单一水合物,氮分子和氧分子同时进入水合物的大笼和小笼中。与空气中的氮、氧比例相比,水合物中氧分子明显富集,氮分子和氧分子的比例为2.4∶1。     

The Role of Fracture Structure in Leachate Pollution at Landfills： A Case Study of a Landfill in Chongqing City

This paper studies a landfill where there are three faults running through.As serious pollution has occurred to the geological environment,the landfill is to be closed up and renovated.The paper aims to explore the role of fracture structure in leachate pollution at the landfill.The research was carried out in several stages.First,mathematical models of the pre-renovation landfill with three faults running through and the landfill after renovation were established.And then,the boundary conditions and parameters of the two mathematical models were determined.The groundwater level of the landfills was simulated in order to modify the two mathematical models.As a result,a feasible mathematical model was achieved.Based on this model,a comparison was made of the COD concentration variations in the inside leachate and outside leachate between the two landfills. Accordingly,the impacts of the fracture structure on the pollution of leachate at the landfills could be identified.The study results show that while faults contribute to the migration of leachate,they also serve as a confluence of leachate,thus further deteriorating the environment.The COD concentrations of the inside leachate and the outside leacbate of the pre-renovation landfill are respectively 800 mg/L and 220 mg/L higher than those of the post.renovation landfill.Therefore,measures must be taken to handle the leachate seepage in areas where there are faults as well as the neighboring areas so as to get the environmental pollution under control.     

Petroleum Migration Direction of the Silurian Paleo-pools in the Tarim Basin, Northwest China

The results obtained in this paper indicate that carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has a high concentration and complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in studying petroleum migration of paleo-pool. During the basin＇s first-stage of oil-gas pool formation in the Silurian in Tazhong and Tabei areas of Tarim Basin （at the end of Silurian period） and the second-stage in the Awati area （in Permian）, the petroleum experienced a long-distance migration. During the formation of the Silurian paleo-pools in Tazhong Uplift at the end of Silurian, the petroleum mainly came from the lower and middle Cambrian source rocks in the Manjiaer sag. The petroleum migrated towards the southwest-south entering the Silurian reservoir beds in Tazhong first. Then, it further migrated within Silurian from northwest to southeast along the highs of the Structural Belts to the region of the Silurian pinchout boundary in Tazhong. In Tabei Uplift, during the first-stage of pool formation, the petroleum was also from the lower and middle Cambrian source rocks in the Manjiaer sag. It migrated northwest entering the Silurian reservoir beds in the Tabei Uplift firstly, and then the migration continued in the same direction within the Silurian reservoirs and finally the petroleum was trapped in higher positions. During the second-stage pool formation in the Silurian beds in the areas around Awati sag, the petroleum mainly came from the lower-middle Cambrian source rocks in the Awati sag. The petroleum migrated from the generation center to Silurian reservoirs in all directions around the sag through major paths, and the petroleum was finally trapped in higher locations.     

The Role of Fracture Structure in Leachate Pollution at Landfills: A Case Study of a Landfill in Chongqing City

This paper studies a landfill where there are three faults running through. As serious pollution has occurred to the geological environment, the landfill is to be closed up and renovated. The paper aims to explore the role of fracture structure in leachate pollution at the landfill. The research was carried out in several stages. First, mathematical models of the pre-renovation landfill with three faults running through and the landfill after renovation were established. And then, the boundary conditions and parameters of the two mathematical models were determined. The groundwater level of the landfills was simulated in order to modify the two mathematical models. As a result, a feasible mathematical model was achieved. Based on this model, a comparison was made of the COD concentration variations in the inside leachate and outside leachate between the two landfills. Accordingly, the impacts of the fracture structure on the pollution of leachate at the landfills could be identified. The study results show that while faults contribute to the migration of ieachate, they also serve as a confluence of leachate, thus further deteriorating the environment. The COD concentrations of the inside leachate and the outside leachate of the pre-renovation landfill are respectively 800 mg/L and 220 mg/L higher than those of the post-renovation landfill. Therefore, measures must be taken to handle the ieachate seepage in areas where there are faults as well as the neighboring areas so as to get the environmental pollution under control.