Testing and modeling of the mechanical behavior of dolomite in the Wudongde hydropower plant

In order to understand the mechanical behaviours of the surrounding rocks in the underground caverns of the Wudongde hydropower plant, triaxial tests are performed on a type of dolomite. It is revealed that damage induced by crack development is the main factor controlling the nonlinear plastic deformation and failure behaviour of the dolomite in both pre- and post-peak regimes. Based on this understanding, a coupled elastoplastic damage model is developed for capturing the dolomite’s mechanical behaviours. In the model, the effects of plasticity and damage on rocks is described by introducing plastic hardening and damage softening commonly in the plastic yield surface. Which are both derived from a suitable Helmholtz free energy function. The model is used to simulate the triaxial tests. Comparisons between test results and the numerical modelling show that the developed model is capable of describing the macro mechanical behaviours of the Wudongde dolomite.     

西秦岭上白垩统红层空间分布及其对青藏高原东北缘隆升的地质约束

通过对西秦岭上白垩统红层地层基本沉积特征的研究和空间高程分布的定量化分析,讨论了西秦岭晚白垩世时期可能的构造地貌状态及西秦岭新生代以来地壳隆升的空间变化规律。取得如下认识:1根据西秦岭上白垩统底部洪积-冲积砾岩层之上普遍存在一套厚度不等的具有风成砂岩特征的红色中细粒砂岩和上部出现以泥岩、泥质粉砂岩为主的湖相沉积,结合现今多分布在不同水系分水岭之上,以及西秦岭中部宕昌-岷县-临潭断裂带两侧上白垩统红层地层顶面高程和底部角度不整合面高程没有显著差异分析,认为西秦岭无论在晚白垩之前经历了何种构造过程,晚白垩世具有整体稳定的泛沙漠-湖盆的古构造地貌状态,且断裂带不具备控制上白垩统沉积的构造边界性质;2现今离散型分布在西秦岭的上白垩统沉积地层反映的原型盆地不是孤立的、受区域断裂控制的山间盆地,而是统一的泛沙漠-内陆湖盆,现今的离散型分布是新生代以来地壳不均匀隆升和侵蚀的结果;3西秦岭上白垩统底部的角度不整合面产状,虽然由于后期构造变动呈非完全水平状态,但总体产状平缓。从大区域尺度分析,可以近似看做原始近水平的古地貌面。通过对该角度不整合面高程信息提取和模拟分析,结果表明,其高程分布具有从南西到北东、从北西到南东逐渐降低,穿越区域断裂带没有显著梯度变化,指示了西秦岭新生代以来的隆升具有整体性和隆升幅度呈连续梯度变化的特征。这可能指示了西秦岭新生代以来的地壳隆升机制主要不是上地壳挤压逆冲缩短,而是在印度板块-欧亚板块碰撞汇聚的动力学背景下,下地壳或上地幔自西南向北东连续流变逐渐增厚,造成了青藏高原东北缘呈向北东突出的弧形扩展隆升。     

Prediction of Seaward Slope Recession in Berm Breakwaters Using M5' Machine Learning Approach

In the design process of berm breakwaters, their front slope recession has an inevitable rule in large number of model tests, and this parameter being studied. This research draws its data from Moghim’s and Shekari’s experiment results. These experiments consist of two different 2D model tests in two wave flumes, in which the berm recession to different sea state and structural parameters have been studied. Irregular waves with a JONSWAP spectrum were used in both test series. A total of 412 test results were used to cover the impact of sea state conditions such as wave height, wave period, storm duration and water depth at the toe of the structure, and structural parameters such as berm elevation from still water level, berm width and stone diameter on berm recession parameters. In this paper, a new set of equations for berm recession is derived using the M5'' model tree as a machine learning approach. A comparison is made between the estimations by the new formula and the formulae recently given by other researchers to show the preference of new M5'' approach.     

Development of A Depth-Integrated Longshore Current Model with Unstructured Grids

A depth-integrated model for simulating wave-induced longshore current was developed with unstructured grids. Effects of surface roller and horizontal mixing under combined waves and currents were incorporated in the numerical model. Recommended values of model coefficients were also proposed based on sensitivity analysis. Field observations and three series of laboratory measurements including two cases conducted on the plane beach and one implemented on the ideal inlet were employed to examine the predictive capability of this model. For the field case and laboratory cases conducted on the plane beach, numerical results were compared favorably with the measured data. For the case with an ideal inlet, simulated circulation pattern is supposed to be reasonable although some deviations between numerical results and measured data still can be detected.     

Laboratory Study for Influence of Clay Content (CC) on Wave-Induced Liquefaction in Marine Sediments

In this artice, the influence of clay content on the wave-induced liquefaction in marine sediments was reported. The one-dimensional (1-D) equipment was setup with a vertical cylinder and 1.8–m–thick clayey sandy deposit and 0.2–m–thick water above the deposit. Unlike the previous experimental study for a single soil layer, this study used sand-kaolin mixtures, sand-illite mixtures, and sand-bentonite mixtures as the experimental samples. A series of experiments with 3,000 wave cycles in each test were conducted under numerous wave and soil conditions, which allowed us to examine the influence of clay content (CC) on wave-induced liquefaction in marine sediments. The experimental results showed that the clayey sandy deposit will become prone to liquefaction with the increase of CC when CC is less than a critical value, which depends on the type of clay. However, when CC is greater than the critical value, liquefaction depth will decrease as CC increases. Furthermore, when the CC value reaches a certain level, liquefaction will not occur. For example, no liquefaction occurs when CC ≥ 33% for both kaolin-sand and illite-sand mixtures and CC ≥ 16.36% for bentonite-sand mixtures.     

Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

Nonparametric Estimation of Undrained Shear Strength for Normally Consolidated Clays

For decades, various well-known empirical correlations have been established and commonly used to estimate the undrained shear strength of normally consolidated clays in geotechnical practice. However, there are still many contradictory cases regarding the validity of these correlations, so their applicability and reliability are questionable. In this study, an extensive geotechnical database for normally consolidated clays has been compiled. Next, a Bayesian nonparametric method is exploited to identify the most critical soil index properties in inferring the undrained shear strength and a new predictive model is proposed. Finally, the performance of the proposed predictive model is assessed and compared with two well-known correlations using an independent testing database. It confirms that the proposed model not only possesses high predictability, but also provides superior performance over other existing empirical correlations.     

三峡库岸滑坡变形特征及影响因素分析

三峡库区涉水滑坡主要影响因素是水位和降雨量,也是库区滑坡体失稳的主要影响因素和诱发因素。库区每年重复着水位升降不利于滑坡的稳定,而降雨特别是大强度的降雨也诱发产生滑坡。当水位波动遇到降雨,出现工况叠加,滑坡将加剧。因此,有必要对影响滑坡变形的主导因素进行了解分析。2016年6月三峡库区全面展开了自动化监测,使得数据统计方便可靠。本文采用滑坡变形速率、降雨量、库水位变化、最大水位变化速率、淹没程度,运用灰色关联度分析法对涉水滑坡进行了计算分析。水位下降阶段,文中土质滑坡变形受库水位影响最大。水位上升阶段,该土质滑坡上部变形受降雨影响最大,下部受水位影响最大。文中岩质滑坡总是受库水位影响最大。     

基于斜坡破坏模式的软弱变质岩区岩质滑坡易发性评价

滑坡受控于地质环境条件和坡体地质结构,不同地质结构的斜坡失稳破坏的模式存在差异,本文以后龙门山千枚岩区为例,基于现场调查,梳理总结了区内岩质滑坡发生的力学模式与斜坡地质环境、坡体结构之间的关系,进而选取控制滑坡发生的关键因素,运用ARCGIS软件的加权叠加功能定量划分了不同模式滑坡的易发区域,主要取得以下认识：（1）滑移—拉裂式滑坡主要发生在坡度30-45°的顺向飘倾坡内、滑移—溃曲式滑坡发生在坡度30-45°的顺向伏倾坡内、倾倒变形主要发生在岩层倾角大于65°的反向斜坡内;（2）区内倾倒变形易发区面积为8.73km2、滑移拉裂易发区面积为4.31m2、滑移溃曲易发区面积为3.28km2,以倾倒变形类型的滑坡为主,已发生滑坡与易发分区结果比对证明了滑坡易发分区与实际情况基本吻合。     

基于无机成因的油气勘查概念模型(BRCF)

基于超基性岩蛇纹石化成油理论,根据构造条件和沉积条件,提出了石油勘查概念模型——"BRCF"模型:B代表侵入地壳超基性岩;R代表储油层;C代表盖层;F代表深大断裂。运用该模型分析了波斯湾地区油气田和中国典型油气田油气成藏规律,并预测了中国大陆油气勘查靶区。