Freely floating-body simulation by a 2D fully nonlinear numerical wave tank

Nonlinear interactions between large waves and freely floating bodies are investigated by a 2D fully nonlinear numerical wave tank (NWT). The fully nonlinear 2D NWT is developed based on the potential theory, MEL/material-node time-marching approach, and boundary element method (BEM). A robust and stable 4th-order Runge–Kutta fully updated time-integration scheme is used with regriding (every time step) and smoothing (every five steps). A special φ_n-η type numerical beach on the free surface is developed to minimize wave reflection from end-wall and wave maker. The acceleration-potential formulation and direct mode-decomposition method are used for calculating the time derivative of velocity potential. The indirect mode-decomposition method is also independently developed for cross-checking. The present fully nonlinear simulations for a 2D freely floating barge are compared with the corresponding linear results, Nojiri and Murayama’s (Trans. West-Jpn. Soc. Nav. Archit. 51 (1975)) experimental results, and Tanizawa and Minami’s (Abstract for the 6th Symposium on Nonlinear and Free-surface Flow, 1998) fully nonlinear simulation results. It is shown that the fully nonlinear results converge to the corresponding linear results as incident wave heights decrease. A noticeable discrepancy between linear and fully nonlinear simulations is observed near the resonance area, where the second and third harmonic sway forces are even bigger than the first harmonic component causing highly nonlinear features in sway time series. The surprisingly large second harmonic heave forces in short waves are also successfully reproduced. The fully updated time-marching scheme is found to be much more robust than the frozen-coefficient method in fully nonlinear simulations with floating bodies. To compare the role of free-surface and body-surface nonlinearities, the body-nonlinear-only case with linearized free-surface condition was separately developed and simulated.     

鱼类生长激素的体内代谢、分泌调控和作用机制研究的进展

主要对１９８３－１９９６年间关于鱼类生长激素的体内代谢、分泌调控和作用机制的研究进展予以综合评述。通过鱼类划性放射免疫测定法的建立和体风代谢动力学研究，证实，外源生长激素在鱼体内不会产生积累。鱼类生长激素的分泌调控受下丘脑分泌的生长激素释放因子（ＧＨＲＦ）和释放抑制因子（ＳＲＩＦ）的双重；促性腺激素释放激素（ＧｎＲＨ）、雌二醇（Ｅ２）、促甲状腺素释放激素（ＴＲＨ）和神经肽（ＮＹＰ）对鱼类生长激素的     

小波气候突变的检测--应用范围及应注意的问题

气候突变及其检测是气候变化研究的一个重要方面。气候突变的表现多种多样,目前也有许多检测气候突变的方法,但这些方法能否准确地检测出气候突变现象,他们的适用范围如何,是一个值得注意的问题。研究表明,尽管小波分析方法在检测序列突变方面具有严格的数学意义,但因为其检测到的是序列的均值突变,因此,在应用于气候突变的检测方面应该特别注意,数学上的严格并不等同于气候意义上的严格。因为某些情况下有些突变点并没有一定的气候意义。     

九龙江河口区水体中的226Ra和228Ra

用ＭｎＯ２－纤维富集大体积水样中的Ｒａ同位素，并用直接射气法测定２２６Ｒａ和２２８Ａｃ的β计数法测定２２８Ｒａ的方法，研究了九龙江河口区２２６Ｒａ，２２８Ｒａ的行为，结果表明：在该河口区２２６Ｒａ，２２８Ｒａ均呈非保守行为，２２６Ｒａ，２２８Ｒａ的最高值分别在盐度为１９和９处测得。２２８Ｒａ／２２６Ｒａ）Ａ．Ｒ．值在盐度小于１９的区域约为３左右。与世界其他河口区相比，九龙江河口区的２２６Ｒａ，２２     

冰心中的气候环境记录与全球变化研究

冰心是高分辨地记录全球变化的主要信息载体之一。本文总结了冰心中提取古气候和古环境信息的系列记录，包括同位素、微量气体、阴阳离子、微粒、生物和有机质等。着重讨论了由这些记录提取的古气候和古环境变化方面的研究进展，并提出了今后的研究重点。     

宁镇地区的限制性断层

宁镇山脉的褶皱带被一系列横断层分割为褶断段。横断层相邻的断块,无论是褶皱的形态、纵断层的数目、规模和断距等特征沿纵向跨越横断层均存在不连续性的跃变,表明这些横断层是早于褶皱或与之伴生的纵断层而存在,并对各断块内发育的地质构造起到限制作用。因横断层作为较早的边界,后期的挤压在被分割的各块段内可以是有差异的,导致宁镇褶皱带在总体上的一致性,分段上的有特殊性。     

大黄鱼(Pseudosciaena crocea)转铁蛋白(Tf)基因克隆及序列分析

提要应用RNeasy animal mini试剂盒抽提大黄鱼total RNA,逆转录合成模板cDNA;同时综合分析从GenBank数据库查询到已报道的转铁蛋白(Tf)基因序列,先设计并合成扩增引物扩增出大黄鱼转铁蛋白部分基因序列,再应用RACE技术,克隆出大黄鱼转铁蛋白全长cDNA基因,全长2461个核苷酸,编码661个氨基酸。应用WCG软件包,采用DNADIST和NEIGHBOR分析方法,构建了转铁蛋白系统进化树。树图显示与传统的分类地位大致相符,可以看出转铁蛋白在海水鱼和淡水鱼的进化上的差异,同时也显示大黄鱼Tf与真鲷的同源性最高。     

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.