陆相沉积的天文地层研究方法简介——以井下地层为例

通过对我国大陆三十余口井的测井资料研究成果,归纳出对陆相地层进行天文地层研究的方法。介绍了所用的新的天文周期理论值、测井资料的选取及预处理方法,重点说明谱分析的数据点数的选定、不同参数(自然伽玛、自然电位和岩屑)的测井资料谱分析结果的对比,以实例说明如何选定主要优势旋回和AR值,以及FIR数字滤波器的基本性质和数字滤波结果,小波分析的特点和通过小波图进行调频的方法,并介绍了地层单位的延续时间计算和年龄确定方法。     

三次谐波对配电系统的危害及抑制措施

为了更好地降低或消除供电系统中的三次谐波，保障供电系统的安全运行，针对三次谐波对供配电系统的影响越来越严重的现状，以国家气象信息中心供配电系统为研究对象，采用理论分析与实际测量相结合的方法，对三次谐波的危害及抑制措施进行了研究。指出了三次谐波产生的原因，分析了三次谐波引起的5种主要危害，并以此为依据，提出了降低或消除三次谐波的6种不同方法。通过对降低或消除三次谐波不同方法进行分析、对比，结合实践的检验，通过在配电系统接近负荷的位置安装D-Yn接法隔离变压器，可以最有效地抑制三次谐波产生的各种危害，明显改善供电系统的供电质量和配电系统及设备的安全运行，是行之有效的三次谐波抑制措施。     

基于中值滤波和小波变换的天气雷达回波图像处理

本文提出了一种中值滤波和小波变换相结合的天气雷达回波图像处理方法,分别从目标回波的视觉角度和统计量的客观角度对处理后图像进行了分析。实验结果表明,本文算法实现了去除回波图像中高斯和脉冲混合噪声的目的,有效的保留了回波图像边缘细节,视觉效果好,层次感较为丰富,处理效果明显优于传统图像处理方法,为自动识别回波种类的研究提供了良好的基础。     

Integrated Navigation System and Experiment of a Low-Cost and Low-Accuracy SINS/GPS

When SINS (strap-down inertial navigation system) is combined with GPS, the observability of the course angle is weak. Although the course angle error is improved to some extent through Kalman filtering, the course angle still assumes a divergent trend. This trend is aggravated further when using low-cost and low-accuracy SINS. In order to restrain this trend, a method that uses AHRS to substitute for SINS course angle information is put forward aimed at the hardware component characteristic of the low-cost and low-accuracy SINS including AHRS (attitude and heading reference system) and IMU (inertial measurement unit). Real static and dynamic experiments show that the method can restrain the divergent trend of the navigation system angle effectively, and the positioning accuracy is high.     

A method to improve the alignment performance for GPS-IMU System

Zero velocity and zero east component of rotation rate relative to local geographic frame have been traditionally applied as measurements for fine alignment of a GPS-IMU system. The performance of the fine alignment, however, will be affected by several types of inertial sensor errors, which could cause part of the Kalman filter states to be unobservable. To overcome this problem, a new method that utilizes the total outputs of the gyro triad and the accelerometer triad as part of the measurements has been proposed by the authors. The initial results have confirmed the effectiveness of the method. In this paper, the observability for both traditional and new alignment methods will be first reviewed. The results from computer simulations will then be presented to compare the traditional and the new alignment methods for the purpose of evaluating the performance of the proposed new method. Data acquired from real inertial sensors will also be applied to assess the traditional and new alignment methods by analyzing their innovation sequences from the Klaman filter. Based on a paper presented at the 18th International Technical Meeting of the Satellite Division of the Institute of Navigation, Long Beach, California, September 2005.     

GPS sidereal filtering: coordinate- and carrier-phase-level strategies

Multipath error is considered one of the major errors affecting GPS observations. One can benefit from the repetition of satellite geometry approximately every sidereal day, and apply filtering to help minimize this error. For GPS data at 1 s interval processed using a double-difference strategy, using the day-to-day coordinate or carrier-phase residual autocorrelation determined with a 10-h window leads to the steadiest estimates of the error-repeat lag, although a window as short as 2 h can produce an acceptable value with > 97% of the optimal lag’s correlation. We conclude that although the lag may vary with time, such variation is marginal and there is little advantage in using a satellite-specific or other time-varying lag in double-difference processing. We filter the GPS data either by stacking a number of days of processed coordinate residuals using the optimum “sidereal” lag (23 h 55 m 54 s), and removing these stacked residuals from the day in question (coordinate space), or by a similar method using double-difference carrier-phase residuals (observational space). Either method results in more consistent and homogeneous set of coordinates throughout the dataset compared with unfiltered processing. Coordinate stacking reduces geometry-related repeating errors (mainly multipath) better than carrier-phase residual stacking, although the latter takes less processing time to achieve final filtered coordinates. Thus, the optimal stacking method will depend on whether coordinate precision or computational time is the over-riding criterion.     

逐次滤波方法在GPS单点定位中的应用研究

采用平差计算中得到的观测值的残差来估计指数函数经验模型中的参数，从而使随机模型更真实地反映观测值中的随机误差和偏差。由实际GPS观测数据厦广播里历，按以上的函数模型和随机模型采用逐次滤波方法进行解算。结果表明，此方法在未剔除和修复周跳的情况下，可以使单点静态定位的平面外符合精度达1．46m，高程方向的外符合精度为1．72m。     

广东省逐年初台登陆时间的变化特点

通过对广东省初始登陆时间资料的分析,发现其具周期变化的特点。根据循环阶段（周期）的划分,比较满意地解释了近３年广东省初始登陆时间明显偏迟的原因。     

基于多分辨分析的滤波算法在SAR图像斑点噪声消除中的应用

合成孔径雷达 (SAR)图像一般都存在相干噪声 ,对地物信息的提取及 SAR图像应用的干扰非常严重 ,对此许多人提出了不少处理方法 ,并分析对比了多种滤波算法 ,认为改良 K -均值自适应滤波效果最佳。本文中分析了改良 K -均值自适应滤波法的数学基础的局限性 ,并采用了一种基于多分辨分析的滤波算法 ,该算法通过将噪声 (或较小的结构特征 )与较大的结构特征相分离 ,然后滤出噪声 (或较小的结构特征 ) ,从而达到消除斑点噪声的目的。实验结果证明 ,基于多分辨分析的滤波算法在消除 SAR图像的斑点噪声方面优于改良 K -均值自适应滤波法。     

应用计算机“推导”位场圆滑滤波及二次导数公式的方法

根据台劳级数展开式,将窗口内网格结点位场数据在计算点展开,且对应点两两相加,由最小二乘法求得窗口内网格结点的圆滑滤波算子和二次导数算子,将此算子与观测的位场数据褶积,就可得到位场圆滑后的数据及水平、垂直二次导数。