机载LiDAR定位精度分析

介绍机载激光雷达测量技术,根据测量的几何原理推导定位方程。讨论定位的误差来源,建立误差模型并对误差影响进行分析。综合各项因素的影响,将模拟数据代入误差传播公式,计算定位精度。     

非量测相机影像三维模型构建及精度检验

针对三维模型构建投资大、周期长、技术难度较高的问题,该文提出了基于Agisoft PhotoScan的非量测相机影像三维模型构建及精度检验方法。在对非量测数码相机数据进行预处理的基础上,利用Agisoft PhotoScan软件进行数据定向、点云提取、建立不规则三角网及数字高程模型和数字正射影像的制作;根据生成的数字高程模型和正射影像建立研究区域的三维场景模型。实验结果证明,该方法可快速建立高精度三维模型,缩短建模时间并降低投资成本。     

低空大比例尺地形图航测生产关键技术

针对传统航空摄影测量生产工艺在生产过程中遇到的影响大比例尺测图精度的问题,该文探讨了低空航测生产大比例尺地形图的关键技术。通过选用宽角相机、低航高飞行、强化影像匹配、野外布设标志控制点、优选平差模型、精化测图操作等改进方式,以提高大比例尺航测精度;组建无人飞艇低空航测系统,对提出的技术方法予以实现;最后给出了山西境内近30个县市建成区1∶500测绘生产实践的部分验证成果。     

Effect of sensor modelling methods on computation of 3-D coordinates from Cartosat-1 stereo data

The orbital and the rational polynomial coefficients (RPC) models are the two most commonly used models to compute a three-dimensional coordinates from an image stereo-pair. But it is still confusing that with the identical user provided inputs, which one of these two models provides more accurate digital elevation model (DEM), especially for mountainous terrain. This study aimed to find out the answer by evaluating the impact of used models on the vertical accuracy of DEM extracted from Cartosat-1 stereo data. We used high-accuracy photogrammetric DEM as the reference DEM. Apart from general variations in statistics, surprisingly in a few instances, both the DEMs provided contrasting results, thus proving the significance of this study. The computed root mean square errors and linear error at 90% (LE90) were lower in case of RPC DEM for various classes of slope, aspect and land cover, thus suggesting its better relative accuracy.     

基于FLUENT的内孤立波质量源造波方法

为研究内孤立波质量源数值造波方法,本文采用两个点源形式的质量源,分别放置于两层流体的上下层中作为内孤立波激发源。推导源项表达式,从不可压缩流体的Navier-Stokes方程出发,结合内孤立波Kd V、e Kd V理论,基于商业软件FLUENT发展了一种内孤立波质量源数值造波方法。通过数值模拟,分析了质量源造波过程中内孤立波的生成过程,并将数值模拟结果同理论及实验作对比。结果表明:基于此方法生成的内孤立波波形、波高及波致水平速度与理论及实验吻合度较好,该方法是可行的,并且耗时短、效率高。     

一种基于Curvelet变换的合成孔径雷达海洋内波图像的斑点噪声抑制方法

合成孔径雷达是海洋内波研究中最重要的工具之一。雷达图像中的斑点噪声会严重降低图像的质量,这一问题在处理和分析信号较弱的二模态内波信号和上升型内波信号时极为明显。合成孔径雷达图像中的海洋内孤立波的信号具有明显的尺度性和方向性。同时,curvelet变换作为一种同时具备尺度分辨率和方向分辨率的数学变换,能够对一幅雷达图像在不同尺度、不同方向和不同位置上进行分析。本文给出了一个基于curvelet变换的合成孔径雷达海洋内孤立波图像的斑点噪声抑制方法。该方法可简述为：(1)对一幅合成孔径雷达海洋内孤立波图像进行curvelet变换,获得curvelet系数;(2)分别仅仅保留一个尺度的系数,将其它尺度的系数置为零,利用处理之后的系数分别重建图像,得到仅仅用一个尺度的系数重建的图像;(3)分别计算上一步中得到的图像的均方差,根据波浪理论,图像的方差代表能量,方差越大则能量越大,以此可以确定内波信息集中的尺度;(4)在每个尺度下,分别计算每个方向的curvelet系数矩阵的平均值,以此确定内孤立波信号集中的方向;(5)在上两步工作的基础上,仅仅保留内波信号集中的尺度和方向的系数,而将其它尺度和方向的系数置为0,得到一幅提取主波信息的图像;(6)将上一步得到的提取主波信息的图像加回到原始图像中,从而达到增强波浪信息并抑制斑点噪声的目的。大量的实验验证表明,该方法不仅能有效地压制斑点噪声,而且能有效地增强波浪信号。     

考虑地球曲率影响的重力中间层校正计算及其精度分析

介绍一种考虑地球曲率影响的“球冠模型” 重力中间层校正算法,并通过不同算例对比该算法与以往“圆柱体模型”算法之间的差值。结果表明,其差值的数量级最大可达0.4 mGal。     

Effects of Column Diameter on Setting Behavior of Dredged Slurry in Sedimentation Experiments

This article investigates the influence of dimensions of a settling column on the settling mode and the settling rate. End conditions of the settling stage in the hindered settling were also analyzed. It was found that the settling mode in a column with a smaller diameter tends to be consolidation settling. The effect of a settling column wall decreases with increasing column diameter, and it can be ignored provided the column diameter is larger than 14.5 centimeters. For the difference in initial water content, the settling behavior of the slurry develops a different sensitivity to the diameter effect. The influence of column diameter reduces as the initial water content of the slurry becomes higher. It is suggested that the internal diameter of the column used in a sedimentation experiment should be 14.5 centimeters.     

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.