山东长岛黄土沉积物的磁性与碳酸盐特征及其环境意义初探

通过对长岛沉积物采样和磁性测试,分析和讨论了长岛黄土沉积物的磁性特征:该剖面磁性矿物的含量并不是很高,且以亚铁磁性矿物为主,磁性矿物的粒度主要以细粒为主,亚铁磁性矿物的变化在沉积物磁性变化中占主导地位.通过对沉积物磁性特征和碳酸盐特征的对比发现:该剖面沉积物磁化率和碳酸盐具有很好的对应关系,并且明显表现出4个阶段的主要变化,对应了暖湿和冷干的气候旋回.根据沉积物的磁化率与古气候环境的内在联系,结合碳酸盐含量变化情况,对该地区风成沉积物的物源变迁及环境演变也进行了初步探讨和分析.     

Slowness-backazimuth weighted migration: A new array approach to a high-resolution image

We have developed a new array method combining conventional migration with a slowness-backazimuth deviation weighting scheme. All seismic traces are shifted based on the theoretical traveltime of the scattered wave from specific gridpoints in a 3-D volume. Observed slowness and backazimuth are calculated for each raypath and compared with theoretical values in order to estimate slowness and backazimuth deviations. Subsequently, stacked energy calculated by a conventional migration method is weighted by the slowness and backazimuth deviations to suppress any arrival energy whose slowness and backazimuth are inconsistent with the expected theoretical values. This new method was applied to two P- wave data sets which comprise (1) underside reflections at the 410 and 660 km mantle discontinuities and (2) D" reflections as well as their corresponding synthetic data sets. The results show that the weighting scheme dramatically increases the resolution of the migrated images and enables us to obtain well-constrained, focused images, making upper-mantle discontinuities and D" reflections more distinct by reducing their surrounding energy.     

基于3S技术和USLE的深圳市茜坑水库流域土壤侵蚀强度预测研究

基于RS、GPS和GIS(3S技术)的集成提出了USLE 6大因子的算法,在建立的专题地理信息数据库基础上,运用USLE对深圳市茜坑水库流域的土壤侵蚀强度进行预测和估算.结果表明:整个流域90.5%的区域土壤流失强度为中度以下,强度侵蚀以上的区域虽然仅占整个流域面积的9.5%,但是年土壤侵蚀量达到了整个流域土壤侵蚀量的49.4%.流域土壤侵蚀强度和植被覆盖情况明显相关,茜坑水库流域的东北山区部分是整个流域的严重侵蚀区.研究证明:在3S技术集成支持下,采用USLE对流域的土壤流失强度进行预测和估算的方法具有直观、方便、快捷的优点,成果能充分满足小流域水土保持工作的需要.     

New insights into the P- and S-wave velocity structure of the D" discontinuity beneath the Cocos plate

Broad-band P - and S -waves from earthquakes in South America recorded at Californian network stations are analysed to image lateral variations of the D"-discontinuity beneath the Cocos plate. We apply two array processing methods to the data set: a simplified migration method to the P -wave data set and a double-array method to both the P - and S -wave data sets, allowing us to compare results from the two methods. The double-array method images a dipping reflector at a depth range from 2650 to 2700 km in the southern part of the study area. We observe a step-like topography of 100 km to a shallower reflector at about 2600 km depth to the north, as well as evidence for a second (deeper) reflector at a depth range from 2700 to 2750 km in the north. Results from the simplified migration agree well with those from the double-array method, similarly locating a large step in reflector depth in a similar location (about 2650 km depth in the south and about 2550 km in the north) as well as the additional deeper reflector at the depth of about 2750 km in the north. Waveform modelling of the reflected waves from both methods suggests a positive velocity contrast for S waves, but a negative velocity contrast for P waves for the upper reflector in agreement with predictions from mineral physical calculations for a post-perovskite phase transition. The data also show some evidence for the existence of another deeper reflector that could indicate a double intersection of the geotherm with the post-perovskite stability field, that is, the back-transformation of post-perovskite to perovskite close to the core–mantle boundary.     

The radio frequency dielectric properties of the stratified UG1–UG2 geological unit in the Bushveld Complex

A new measurement technique enables the complex dielectric properties of the geological strata comprising the UG1–UG2 (Upper Group 1–Upper Group 2) unit of the Bushveld Complex in South Africa to be determined with unprecedented detail at radio frequencies (RF). Results of non-destructive laboratory measurements of representative diamond drill core samples from the UG1–UG2 unit are presented at 25 MHz. These data establish that the UG1 and UG2 chromitite layers are embedded in rock strata (norite, pyroxenite and anorthosite) which are translucent in the HF spectral band, whereas the chromitite layers themselves exhibit significant velocity contrast, making them good radar reflectors. The data presented here is useful for calibration of the radar system, and for predicting the range and resolution performance of borehole radars operating in both the hanging and footwalls of the economically important platiniferous UG2 reef.     

NUMERICAL STUDY ON THE MIXING OF UNSORTED SEDIMENT PARTICLES DISCHARGED INTO A CROSS-FLOW BY MULTIPHASE PARTICLE-IN-CELL （MP-PIC） METHOD

The mixing characteristics of dredged sediments of variable size discharged into cross-flow are studied by an Eulerian-Lagrangian method. A three-dimensional (3D) numerical model has been developed by using the modified k-ε parameterization for the turbulence in fluid phase/water and a Lagrangian method for the solid phase/sediments. In the model the wake turbulence induced by sediments has been included as additional source and sink terms in the k-ε model; and the trajectories of the sediments are tracked by the Lagrangian method in which the sediment drift velocities in cross-flow are computed by a multiphase particle-in-cell (MP-PIC) method and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumped sediment cloud is governed by the total buoyancy on the cloud, the drag force on each particle and velocity of cross-flow. The cross-flow destroys more or less the double vortices occurred in stagnant ambience and dominates the longitudinal movement of sediment cloud. The computed results suggest satisfactory agreement by comparison with the experimental results of laboratory.     

The effect of interpolation methods in surface definition: an experimental study

Mappings of the earth surface and their representation in 3D (three‐dimensional) models are commonly used in most recent research. Modeling research, which starts with classical surveying methods, acquires new dimensions matching the modern technologies. 3D models of any object or earth surface can be used in much visual and scientific research. A digital model of the landscape is an important part within creation of geo‐information systems used in the public administration and in the commercial sphere. It is an important tool in applications such as geomorphology, hydrology, geology, cartography, ecology, mining etc. Values of volume in terrains that do not have regular geometric structure can be obtained more accurately by using 3D models of surfaces with respect to developing technology. Basic data of 3D models must indicate 3D coordinates of the surveyed object in the reference frame. Distribution and intensity of points are important factors in modeling earth surfaces. A minimum number of points is desired in defining an object in 3D. Interpolation methods employing different mathematical models are used to obtain 3D models of terrain surfaces. In this study, the effect of interpolation methods in defining a terrain surface is investigated. For this purpose, a uniform surface, hill‐shaped artificial object with a known volume is employed. The 3D surface and volume are calculated by using 12 different interpolation methods. Point distribution, point intensity and accuracy of point measurements are not considered. The same data set was used for all the interpolation methods. The interpolation methods are compared and evaluated based on the results. Copyright © 2007 John Wiley & Sons, Ltd.