智能全站仪的光学准直方法与精度测试

文章分析了普通光学准直的原理和方法,根据传统自准直方法在工程测量中的缺陷,提出了一种基于智能全站仪的光学准直方法,为了确定该方法可应用于工程测量中高精度的方位传递及保存方位基准,对该方法进行了精度的测试.通过数据的比较,基于智能全站仪的方法与外觇标法的准直数值差值不超过2”,外觇标法与十字丝法的准直数值差值也不超过2”...     

在轨卫星无地面控制点摄影测量探讨

摄影测量卫星采用商用级星敏感器构成的测姿系统,其姿态测量存在不可忽视的低频和＂慢漂＂系统性误差,使得经过在轨标定后的星敏感器和三线阵CCD相机安装角转换参数产生额外的增量dφC、dωC、dκC。在一条航线内,这些增量可视为常量,依靠其在立体模型上表现的上下视差规律,在无地面控制点条件下,通过在光束法平差中增加对dφC、dωC及dκC补偿的措施,无地面控制点目标定位改善到11～22m左右。     

利用HGA和单位四元数的相对定向解法

利用将经典遗传算法和最速下降法相结合的混合遗传算法进行相对定向,并用强收敛性的单位四元数表示旋转矩阵,可有效避免经典遗传算法容易早熟的弱点,并在无需初值的情况下经较少的遗传代数快速收敛。     

基于WebGIS的公路隧道群机电设备管理系统研究

随着隧道工程的迅猛发展,逐渐形成了以隧道群为特点的城市公路隧道体系,对隧道群机电设备的管理与维护提出了更高的要求。在分析公路隧道群机电设备维护特点及WebGIS开发模式的基础上,研究了一种基于WebGIS的公路隧道群机电设备智能化管理系统,实现了隧道群机电设备的分布式维护和集中式管理模式,有利于隧道群运行的安全性、可靠性、经济性及资源利用效率的提高。     

A bundle adjustment approach with inner constraints for the scaled orthographic projection

Bundle adjustment is a method for simultaneously calculating both the interior and exterior orientation parameters of a set of images, and the object-space coordinates of the observed points. In the case of long focal length lenses and narrow field-of-view (FOV) imaging situations, collinearity based (perspective projection) algorithms may result in linear dependencies between parameters that cause solution instability. The use of a scaled orthographic projection model based on linear algebraic formulations was therefore adopted to reduce this risk. Using quaternions, a new mathematical model is derived that includes the partial derivatives as well as the inner constraint equations for a scaled orthographic bundle adjustment. The model was then tested using two image sets of a single, small vessel (about 6 m length) with a cube target of known dimensions at two distinct ranges; perspective solutions were also calculated for comparison. RMS residual errors of 0.74-0.78 pixels associated with the new method compare favorably to a residual error range of 0.59-0.74 pixels using a perspective bundle adjustment of the same target points. Relative precisions (as a ratio of target size) of between 1:1650 and 1:750 have been achieved at ranges of 375 m and 850 m, respectively, given comparisons with the known cube dimensions. A third image dataset consisting of a network of 16 images was solved with a 1:2200 relative precision showing the new method can successfully handle high redundancy. For the experiments that were conducted, the new method was found to produce less precise results than the perspective bundle solution for a FOV of 0.50-0.65° where the object fills 5-8% of the image. However, it was found to match the precision of the perspective model (with an uncalibrated camera) for a FOV of 0.20-0.30° where the object of interest fills only 1-2% of the full image.     

数字苏州公共服务平台的构建

结合苏州市地理信息系统平台建设实际情况,分别从建设目标、技术设计,系统开发、共享模式和应用推广等方面总结了数字苏州市公共服务平台建设的思路与经验,同时也提出了当前推广地理信息系统应用集成开发的创新思想.     

航空摄影统一监管法律基础探讨

关于航空摄影是否是测绘活动,以及测绘部门是否应将航空摄影纳入测绘统一监管的范畴,目前有不同的认识。本文明确了航空摄影是一种重要的测绘活动,从而论述了测绘部门对航空摄影实施统一监管的法律基础。     

Block removal and step backwearing as erosion processes on rock shore platforms: a preliminary case study of the chalk shore platforms of south‐east England

Shore platforms frequently exhibit steps or risers facing seaward, landwards or obliquely across‐shore. A combination of soft copy photogrammetry, ortho‐rectification, geo referencing and field measurement of step height are linked in a GIS environment to measure step retreat on chalk shore platforms at sample sites in the south of England over two periods, 1973–2001, 2001–2007. The methods used allow for the identification, delineation and measurement of historic change at high spatial resolution. The results suggest that while erosion of chalk shore platforms by step backwearing is highly variable, it appears to be of similar magnitude to surface downwearing of the same platforms measured by micro‐erosion meters (MEMs) and laser scanning, in a range equivalent to 0·0006 – 0·0050 m y^?1 of surface downwearing. This equates to annual chalk volume loss from the platforms, by the two erosion processes combined, of between 0·0012 m³ m^?2 and 0·0100 m³ m^?2. Results from the more recent years' data suggests that step retreat has variability in both space and time which does not relate solely to climatic variability. The results must be viewed with caution until much larger numbers of measurements have been made of both downwearing and step erosion at higher spatial and temporal resolution. Copyright © 2010 John Wiley & Sons, Ltd.     

基于以太网的高精度温湿度智能传感器的设计

通过分析气象数据采集系统的功能需求,确定高精度温湿度智能传感系统总体设计方案,介绍系统的软硬件设计与实现。系统以低功耗LPCI768为主控芯片,配合低功耗、16位串行模数转换芯片AD7792以及低功耗、物理层收发器KSZ8041NL等实现基于以太网的高精度测量、自动采集和实时处理等功能,与现有气象数据采集器相比,具有体积小、功耗低、组网灵活和测量精度高等特点。实验结果表明,高精度智能传感器工作稳定,绝对测量误差在0．06℃内。     

目标跟踪中参考模型的自动初始化方法

目标跟踪中参考模型的初始化大多需要手动完成,现有的自动初始化方法也存在明显缺陷,针对这些问题提出了一种自动、精确初始化参考模型的方法。首先采用连通组分标记算法对目标进行计数,并计算每个目标的位置;然后根据回转半径张量法求出包含目标的最小外接矩形;最后从最小外接矩形的参数出发用蒙特卡洛算法求出参考模型的估计。实验结果表明在不同的场景下算法均能准确完成参考模型的初始化,计算出的模型能够体现目标的视觉特征。