初轨计算中的病态分析

本文对现有初轨计算方法进行病态性分析与误差分析；研究结果表明：病态对现有初轨算法的影响，主要来源于法方程系数中包含观测误差．系数行列式愈大，定轨精度的损失愈多，当■被随机误差项△μ淹盖时，现有初轨算法将失效．此外，仿真结果还显示：■与△μ的大小还极大地依赖观测弧段的空间位置，当观测弧段包含近站点作为中点时，■最大，而■小，此时定轨精度较高；当观测弧段位于近站点的某一侧时，■小，而■大，此时定轨精度较低，观测弧段愈偏离近站点，病态影响愈大；因而在观测时，应尽量使观测弧段与近站点对称（此时μ值较大），这是提高短弧定轨的一种有效途径．     

Raman microspectrometry, FT-IR and inclusion characteristics of gem garnets from Tanzania and Madagascar

Chemical composition, Raman microspectrometry, and Fourier transform infrared (FT-1R) and SEM-CL (Cathodluminescence) analyses are carried out for Tanzania and Madagascar garnets for locality identification. Inclusion study was sustained after electron probe microanalysis (EPMA). Needle-like illmenites, apatites and zircons were the most common solid inclusions in Tanzania garnets. Madagascar garnets revealed rutile needles and apatites were also observed, but differences in size, shape and distribution patterns were noticed compared to Tanzania garnets. Tanzania garnets exhibited all types of observable fluid inclusions such as ““ fingerprint““ pattern, called Type Ⅰ-A, liquid-only (L) single phase fluid inclusion, called Type Ⅰ-B and Type Ⅱ-A ( L S), Type Ⅱ-B ( L V) and Type Ⅲ-A (L Sylvite even if all examined garnets from three localities retained ““fingerprint““ features, so called, partially healed fractures, in common. Chemical composition, Raman microspectrometry and Fourier transform infrared (FT-IR) analysis taken turned out to be useful methods for the purpose of this study. Using consequences of SEM-CL and inclusion study, accordingly, the locality identification of gem-quality garnets is capable of being available in further application for other kinds of gemstones.     

INITIAL SEDIMENTATION OF WASTE PARTICLES DISCHARGED IN COASTAL WATERS

Based on a puff model . and together with the consideration of convection , dispersion and descent of suspended waste particles in marine environment , a numerical model is presented to predict the initial sedimentation of waste particles discharged from ocean outfalls in coastal waters and to compute the stable sedimentation rate in homogeneous trde current fields with water depth constant . When the time step selected is small enough , the results from this model agree well with that from the semi-analytical solution , and have sufficient precision for evaluating the impact on the environment caused by sedimentation of waste particles discharged from ocean outfalls. A numerical example is given for predicting the sedimentation of waste particles discharged in Heishijiao , Dalian .     

抗差估计的初值选择

对L1 范估计的平差值和LS估计的平差值作为抗差估计的初值进行了比较 ,指出在 ρ函数是严凸函数时 ,二者无明显的区别。因为LS估计简单且易于计算 ,因此建议用LS估计的平差值作为抗差估计的初值。     

广西芒场锡多金属矿田稳定同位素组成对矿床成因探讨

笔者曾对广西芒场锡多金属矿田的稳定同位素进行研究。本文根据硫、铅、氢、氧、碳等稳定同位素组成和锶的初始值提供的信息.探讨了矿床成因。并结合矿田矿床地质特征、控矿条件及有关统计参数,参考前人对矿床认识的基础上,修正提出了该矿田混合热液成矿模式,可供类似矿床研究和找矿的参考。     

Fluid and source magma evolution of the Questa porphyry Mo deposit,New Mexico,USA

Combined fluid inclusion microthermometry and microanalysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) are used to constrain the hydrothermal processes forming a typical Climax-type porphyry Mo deposit. Molybdenum mineralisation at Questa occurred in two superimposed hydrothermal stages, a magmatic-hydrothermal breccia and later stockwork veining. In both stages, texturally earliest fluids were single-phase, of low salinity (~7 wt.% NaCl_equiv.) and intermediate-density. Upon decompression to ~300 bar, they boiled off a vapour phase, leaving behind a residual brine (up to 45 wt.% NaCl_equiv) at temperatures of ~420°C. The highest average Mo concentrations in this hot brine were ~500 μg/g, exceeding the Mo content of the intermediate-density input fluid by about an order of magnitude and reflecting pre-concentration of Mo by fluid phase separation prior to MoS₂ deposition from the brine. Molybdenum concentrations in brine inclusions, then, decrease down to 5 μg/g, recording Mo precipitation in response to cooling of the saline liquid to ~360°C. Molybdenite precipitation from a dense, residual and probably sulphide-depleted brine is proposed to explain the tabular shape of the ore body and the absence of Cu-Fe sulphides in contrast to the more common Cu-Mo deposits related to porphyry stocks. Cesium and Rb concentrations in the single-phase fluids of the breccia range from 2 to 8 and from 40 to 65 μg/g, respectively. In the stockwork veins, Cs and Rb concentrations are significantly higher (45–90 and 110–230 μg/g, respectively). Because Cs and Rb are incompatible and hydrothermally non-reactive elements, the systematic increase in their concentration requires two distinct pulses of fluid exsolution from a progressively more fractionated magma. By contrast, major element and ore metal concentrations of these two fluid pulses remain essentially constant. Mass balance calculations using fluid chemical data from LA-ICPMS suggest that at least 25 km³ of melt and 7 Gt of deep input fluid were necessary to provide the amount of Mo contained in the stockwork vein stage alone. While the absolute amounts of fluid and melt are uncertain, the well-constrained element ratios in the fluids together with empirical fluid/melt partition coefficients derived from the inclusion analyses suggest a high water content of the source melt of ~10%. In line with other circumstantial evidence, these results suggest that initial fluid exsolution may have occurred at a confining pressure exceeding 5 kbar. The source of the molybdenum-mineralising fluids probably was a particularly large magma chamber that crystallised and fractionated in the lower crust or at mid-crustal level, well below the shallow intrusions immediately underlying Questa and other porphyry molybdenum deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The sandstone-hosted stratiform copper mineralization at Mwitapile and its relation to the mineralization at Lufukwe, Lufilian foreland, Democratic Republic of Congo

The Lufilian foreland is a triangular-shaped area located in the SE of the Democratic Republic of Congo and to the NE of the Lufilian arc, which hosts the well-known Central African Copperbelt. The Lufilian foreland recently became an interesting area with several vein-type (e.g., Dikulushi) and stratiform (e.g., Lufukwe and Mwitapile) copper occurrences. The Lufilian foreland stratiform Cu mineralization is, to date, observed in sandstone rock units belonging to the Nguba and Kundelungu Groups (Katanga Supergroup).The Mwitapile sandstone-hosted stratiform Cu prospect is located in the north eastern part of the Lufilian foreland. The host rock for the Cu mineralization is the Sonta Sandstone of the Ngule Subgroup (Kundelungu Group). A combined remote sensing, petrographic and fluid inclusion microthermometric analysis was performed at Mwitapile and compared with similar analysis previously carried out at Lufukwe to present a metallogenic model for the Mwitapile- and Lufukwe-type stratiform copper deposits. Interpretation of ETM+ satellite images for the Mwitapile prospect and the surrounding areas indicate the absence of NE–SW or ENE–WSW faults, similar to those observed controlling the mineralization at Lufukwe. Faults with these orientations are, however, present to the NW, W, SW and E of the Mwitapile prospect. At Mwitapile, the Sonta Sandstone host rock is intensely compacted, arkosic to calcareous with high silica cementation (first generation of authigenic quartz overgrowths). In the Sonta Sandstone, feldspar and calcite are present in disseminated, banded and nodular forms. Intense dissolution of these minerals caused the presence of disseminated rectangular, pipe-like and nodular dissolution cavities. Sulfide mineralization is mainly concentrated in these cavities. The hypogene sulfide minerals consist of two generations of pyrite, chalcopyrite, bornite and chalcocite, separated by a second generation of authigenic quartz overgrowth. The hypogene sulfide minerals are replaced by supergene digenite and covellite. Fluid inclusion microthermometry on the first authigenic quartz phase indicates silica precipitation from an H₂O–NaCl–CaCl₂ fluid with a minimum temperature between 111 and 182 °C and a salinity between 22.0 and 25.5 wt.% CaCl₂ equiv. Microthermometry on the second authigenic quartz overgrowths and in secondary trails related to the mineralization indicate that the mineralizing fluid is characterized by variable temperatures (Th = 120 to 280 °C) and salinities (2.4 to 19.8 wt.% NaCl equiv.) and by a general trend of increasing temperatures with increasing salinities.Comparison between Mwitapile and Lufukwe indicates that the stratiform Cu mineralization in the two deposits is controlled by similar sedimentary, diagenetic and structural factors and likely formed from a similar mineralizing fluid. A post-orogenic timing is proposed for the mineralization in both deposits. The main mineralization controlling factors are grain size, clay and pyrobitumen content, the amount and degree of feldspar and/or calcite dissolution and the presence of NE–SW to ENE–WSW faults. The data support a post-orogenic fluid-mixing model for the Mwitapile- and Lufukwe-type sandstone-hosted stratiform Cu deposits, in which the mineralization is related to the mixing between a Cu-rich hydrothermal fluid, with a temperature up to 280 °C and a maximum salinity of 19.8 wt.% NaCl equiv., with a colder low salinity reducing fluid present in the sandstone host rock. The mineralizing fluid likely migrated upwards to the sandstone source rocks along NE–SW to ENE–WSW orientated faults. At Lufukwe, the highest copper grades at surface outcrops and boreholes were found along and near to these faults. At Mwitapile, where such faults are 2 to 3 km away, the Cu grades are much lower than at Lufukwe. Copper precipitation was possibly promoted by reduction from pre-existing hydrocarbons and non-copper sulfides and by the decrease in fluid salinity and temperature during mixing. Based on this research, new Cu prospects were proposed at Lufukwe and Mwitapile and a set of recommendations for further Cu exploration in the Lufilian foreland is presented.     

流体包裹体成分测定的低温相变和显微拉曼光谱分析技术研究进展

论述了包裹体低温分析技术的原理以及进展。传统的流体包裹体低温分析技术是以显微冷冻测温测定无机盐体系为主,目前已发展到应用低温原位拉曼光谱技术对包裹体中的阳离子和阴离子进行定量-半定量分析。油气包裹体原位低温分析技术也取得了较大的突破,对不同成分油气包裹体低温下的相变过程取得了一定的认识,据此对油气包裹体进行分类,推测其主要成分,为油气包裹体计算提供基础参数。     

湖北徐家山锑矿床流体包裹体特征及其意义

文章利用激光拉曼光谱和显微测温学方法,对湖北徐家山锑矿床成矿期的石英、重晶石和方解石中的流体包裹体进行了研究。研究表明,这些矿物中的流体包裹体主要有纯液体包裹体和液体包裹体(气相 液相)2类,其液体包裹体的气相成分为H2O±CO2±N2;石英、重晶石和方解石的均一温度分别为134~258℃、154~259℃和145~230℃,主要集中于150~200℃;流体的盐度w(NaCleq)和密度分别集中于3%~6%和0.90~0.96g/cm3。流体包裹体资料揭示出该矿床为典型的中低温热液锑矿床,其成矿流体为中低温、低盐度、中等密度热液。结合H、O、Sr、Pb同位素等研究结果,进一步推断该成矿热液主要是经深部循环演化的大气降水。