Efficient DEM‐based overland flow routing using integrated recursive algorithms

Two primary concerns in performing watershed overland flow routing are the numerical instability and computational efficiency. The stability of executing an explicit scheme has to be maintained by observing the Courant–Friedrich–Lewy criterion, which is adopted to confirm that the numerical marching speed is larger than the wave celerity. Moreover, there is another criterion of time step devised in previous studies to avoid back‐and‐forth refluxing between adjacent grids. The situation of refluxing usually occurs on flat regions. In light of this, the selection of a small time increment to honor both restrictions simultaneously is believed to decrease the computational efficiency in performing overland flow routing. This study aims at creating a robust algorithm to relax both restrictions. The proposed algorithm was first implemented on a one‐dimensional overland plane to evaluate the accuracy of the numerical result by comparing it with an analytical solution. Then, the algorithm was further applied to a watershed for 2D runoff simulations. The results show that the proposed integrated algorithm can provide an accurate runoff simulation and achieve satisfactory performance in terms of computational speed.     

Revised runoff curve number for runoff prediction in the Loess Plateau of China

The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN₂ values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.     

甘肃省第一次全国地理国情普查数据库设计

地理国情普查数据库是地理国情普查成果数据存储、管理和分发应用的基础,为地理国情动态监测提供本底数据库。本文从甘肃省实际情况出发,结合信息化测绘服务体系和"天地图·甘肃"等现有成果,从数据库概念设计、逻辑设计、物理设计、接口设计,以及数据库管理系统和地理国情展示系统等方面进行了详细的设计,为全面开展地理国情普查数据库建设奠定了坚实的基础。     

齐齐哈尔市地理国情分析与表达

以齐齐哈尔市为例,利用地理国情普查数据与统计年鉴数据,构建自然地表指数、地理区位指数、生态覆被指数,对齐齐哈尔市各县、区的地理国情进行综合分析和地图表达。结果表明,齐齐哈尔市的总体条件较好,但区域差异较大,自然地表条件与地理区位条件均以中部的齐齐哈尔市辖区为优,而生态覆被条件则以北部和西部地区为优。     

Possible sources of forecast errors generated by the global/regional assimilation and prediction system for landfalling tropical cyclones. Part I: Initial uncertainties

This paper investigates the possible sources of errors associated with tropical cyclone (TC) tracks forecasted using the Global/Regional Assimilation and Prediction System (GRAPES). The GRAPES forecasts were made for 16 landfalling TCs in the western North Pacific basin during the 2008 and 2009 seasons, with a forecast length of 72 hours, and using the default initial conditions (“initials”, hereafter), which are from the NCEP-FNL dataset, as well as ECMWF initials. The forecasts are compared with ECMWF forecasts. The results show that in most TCs, the GRAPES forecasts are improved when using the ECMWF initials compared with the default initials. Compared with the ECMWF initials, the default initials produce lower intensity TCs and a lower intensity subtropical high, but a higher intensity South Asia high and monsoon trough, as well as a higher temperature but lower specific humidity at the TC center. Replacement of the geopotential height and wind fields with the ECMWF initials in and around the TC center at the initial time was found to be the most efficient way to improve the forecasts. In addition, TCs that showed the greatest improvement in forecast accuracy usually had the largest initial uncertainties in TC intensity and were usually in the intensifying phase. The results demonstrate the importance of the initial intensity for TC track forecasts made using GRAPES, and indicate the model is better in describing the intensifying phase than the decaying phase of TCs. Finally, the limit of the improvement indicates that the model error associated with GRAPES forecasts may be the main cause of poor forecasts of landfalling TCs. Thus, further examinations of the model errors are required.     

北京和广州地区云闪初始击穿电场变化特征

对比分析了北京和广州地区各100例云闪初始阶段前30 ms快电场变化波形上初始击穿脉冲的特征。依据脉冲的结构特征,两地区的云闪初始击穿脉冲可分为单极性单峰型、单极性多峰型、双极性单峰型和双极性多峰型脉冲,两地区均以单极性和单峰型脉冲为主。对脉冲参量特征的统计发现,脉冲的10%-90%上升时间、半峰值宽度地区差异性小于脉冲类型差异性;双极性单峰型脉冲的半峰值宽是单极性单峰型的1.2倍。不同类型脉冲过零时间的中值、平均值在10μs左右量级,且广州地区较北京地区的大;云闪初始击穿脉冲宽度平均值显著小于相同地区正地闪的,而脉冲间隔显著大于正地闪的。初始击穿脉冲最为集中的出现在云闪最初的1~2 ms,其比例随时间以显著的负指数分布下降。研究发现,双极性脉冲的过零时间与脉冲宽度之间、起始半周期峰值幅度与过冲幅度之间均存在较好的线性关系。     

地理国情普查外业调绘核查系统实现

针对传统的基于纸质地图的外业调绘核查工作具有操作复杂、采集数据不精确、作业流程不规范等缺点,该文设计开发了基于iPad的地理国情普查外业调绘核查系统。在内业高精度遥感影像判读的基础上,采用全数字化的外业调绘核查技术,进行地理国情要素移动式、网络化外业调查和验证,快速采集和编辑调查数据,为外业工作提供了一套完整的解决方案。该系统在青岛市崂山区和城阳区的试点中已经得到广泛的应用,较好地验证了移动GIS技术用于外业信息采集的可行性。     

贵州桐梓新桥浑水河的成因再探讨

通过对新桥浑水河上游明流段、中部伏流段、下游浑水河段实地调查,并结合该区1:20万区域地质资料、区域水文地质资料及煤矿勘查资料,在分析浑水河区域构造背景及水文地质特征的基础上,研究了浑水河的水动力条件,包括纵向水动力条件和横向水动力条件,认为浑水河是特殊构造通道、水土流失带来的粘土颗粒物源、携带粘土颗粒的水体进入地下伏流,粘土颗粒在河床中沉积后又被流水带出的一个过程,即"流失→带进→沉积→带出"过程。浑水河的成因:1浑水河的特殊构造,具备了通道条件;2上游水土流失带来的大量细小粘土颗粒提供了物源;3洞湾水体"盲谷"是浑水的物源载体;4地下伏流的水动力条件,包括纵向水动力条件和横向水动力条件,四者共同作用的结果。     

晋中至太原城际铁路沿线地质条件分析

晋中至太原城际铁路位于山西断陷带次级构造单元太原断陷盆地内,盆地内部新构造运动复杂,城际铁路沿线跨越多条第四纪隐伏活动断裂,并穿过榆次地裂缝发育地带及砂土液化区域,这些地质问题极大地影响着晋中至太原城际铁路的前期勘测选线。本文从地质构造、地层岩性、浅层地震勘探等方面对穿越城际铁路的三条活动断裂的危险性进行了分析评价,以查明断裂错动对城际铁路的影响。结合前人对榆次地裂缝的研究成果,对城际铁路附近的地裂缝发育情况进行了调查验证,以查明榆次地裂缝对城际铁路的影响。通过在城际铁路车站及车辆段布置地质钻孔,进行标贯试验、剪切波速测试,以查明城际铁路沿线工程地质条件,对沿线车站及车辆段场地进行液化判定及场地类别判定。针对城际铁路沿线存在的上述地质问题,给出了相应的工程建议,对城际铁路前期勘测设计具有重要的指导意义。     

LA-ICP-MS测定锡石U-Pb同位素年龄时两种普通铅扣除方法的原理及适用性比较

根据近年来激光烧蚀电感耦合等离子体质谱仪锡石微区原位U-Pb同位素定年的实验结果,结合相关资料,对实验过程中普通铅扣除的2种主要方法,即谐和图法和等时线法的原理、效果、优点和局限性进行了深入的比较。研究成果表明,2种主要方法各有不同的优点及局限性。在实际工作中,要想获得比较准确的测试结果,需要根据具体矿物样品的年龄范围、总的U和Pb含量、普通铅相对含量、测年精度要求等因素,灵活地选择普通铅扣除的方法。