庐山地区地表温度反演分析

研究庐山地区的地表温度,对于本地区的生态保护和开发具有重要意义。本文使用了目标区域内Landsat TM/ETM+从2000~2010年间共8幅影像数据,利用单通道算法和NDVI地表辐射率估算方法反演了区域内的温度场,并生成了历年温度对比效果图。分析推断目标区域内的温度场可能存在一个短年限的温度变化起伏规律,对庐山周边山区的影响有待进一步研究。     

InSAR相位解缠算法的比较

相位解缠作为合成孔径雷达干涉测量(InSAR,Interferometric Synthetic Aperture Radar)中一个关键的步骤,为获取地形高程提供了基础。相位解缠的质量将直接影响着DEM生成的质量。对现有的几类算法进行实验分析,并对解缠结果的质量进行比较,分析其精确性。结果表明:统计耗费网络流算法具有较好的解缠连续性以及较高的精度,可以获得一个较优的全局解。     

PEIV模型参数估计新算法

PEIV(Partial Errors-In-Variables)模型是EIV模型的扩展,它能解决系数矩阵含有非随机元素或存在结构特性的问题。针对常规PEIV模型算法的复杂性,提出了一种PEIV模型参数估计的新算法。该算法将系数矩阵含误差的元素看成是一类观测值,与平差模型原观测值构成两类观测值,将PEIV平差模型表示为类似于传统的最小二乘间接平差模型,再通过非线性最小二乘平差理论,推导出了算法的迭代公式和精度评定公式。算法迭代格式与间接平差类似,通过算例验证了算法的可行性和正确性。     

Re-parameterization of a quasi-analytical algorithm for colored dissolved organic matter dominant inland waters

Quasi-Analytical Algorithms (QAAs) are based on radiative transfer equations and have been used to derive inherent optical properties (IOPs) from the above surface remote sensing reflectance (R_rs) in aquatic systems in which phytoplankton is the dominant optically active constituents (OACs). However, Colored Dissolved Organic Matter (CDOM) and Non Algal Particles (NAP) can also be dominant OACs in water bodies and till now a QAA has not been parametrized for these aquatic systems. In this study, we compared the performance of three widely used QAAs in two CDOM dominated aquatic systems which were unsuccessful in retrieving the spectral shape of IOPS and produced minimum errors of 350% for the total absorption coefficient (a), 39% for colored dissolved matter absorption coefficient (a_CDM) and 7566.33% for phytoplankton absorption coefficient (a_phy). We re-parameterized a QAA for CDOM dominated (hereafter QAA_CDOM) waters which was able to not only achieve the spectral shape of the OACs absorption coefficients but also brought the error magnitude to a reasonable level. The average errors found for the 400–750 nm range were 30.71 and 14.51 for a, 14.89 and 8.95 for a_CDM and 25.90 and 29.76 for a_phy in Funil and Itumbiara Reservoirs, Brazil respectively. Although QAA_CDOM showed significant promise for retrieving IOPs in CDOM dominated waters, results indicated further tuning is needed in the estimation of a(λ) and a_phy(λ). Successful retrieval of the absorption coefficients by QAA_CDOM would be very useful in monitoring the spatio-temporal variability of IOPS in CDOM dominated waters.     

ECM算法的多视SAR影像分割

多视SAR影像像素强度通常建模为Gamma分布,其形状参数为常数(视数)。实验表明,多视SAR影像分割时,设Gamma分布的形状参数为变量可取得更好的分割结果。由于Gamma分布中形状参数以Gamma函数的形式出现,利用EM算法求解时无法获得形状参数的解析解。为此,本文提出了一种基于Expectation/Conditional Maxinnization(ECM)算法的多视SAR影像分割方法。利用ECM算法估计最大化后验概率条件下的Gamma分布参数及表征最优多视SAR影像分割的标号场实现。采用模拟和真实多视SAR影像验证提出算法。实验结果表明,Gamma分布的形状和尺度参数均能快速收敛到稳态值,且以此得到各同质区域的Gamma分布曲线可以很好地拟合其直方图。通过对分割结果的定性和定量分析,可知提出算法具有有效性和可行性,且优于EM算法。     

改进后灰色神经网络及短期基坑沉降预测研究

在短期基坑沉降监测中,由于数据量少且呈非线性变化,沉降模型很难准确建立。灰色GM(1,1)对数据少、趋势性强、波动小的数据有较高的预测精度,但不能模拟复杂的非线性函数;BP神经网络可以对非线性数据进行学习训练,具有自学习、自适应能力;通过将GM(1,1)与BP神经网络组合,并优化网络部分的学习率、权值和阈值等,建立一种改进的灰色神经网络模型,该模型具有对非线性数据自学习、自适应能力和预测精度更高等优点。通过某基坑沉降监测分析,验证改进的灰色神经网络模型预测精度更高,适合短期建模,具有很好的实用性。     

太原市地表热环境时空格局分析

针对鲜有资源型城市的地表热环境研究这一情况,该文基于Landsat8遥感数据,反演了太原市在2013—2015年间共3期的地表温度。提出一个考虑空间格局结构的城市热岛效应指数,在3期数据中,太原市区整体热岛效应指数分别为9.1%、9.8%和8.9%;同时,根据城市功能和路网结构将太原市区划分为6个分区,从分区级层面量化分析了地表热环境的时空分异特征规律,结果表明,太原市区地表温度整体呈现空间分散化特征,不同分区也呈现出不同的时空格局演变过程;最后,选取40个地表温度实测样本点验证反演精度,最大误差绝对值为1.1℃,最小误差绝对值为0.2℃,均方根误差为0.7℃。     

Landsat 8热红外数据定标参数的变化及其对地表温度反演的影响

Landsat系列卫星上的TIRS热红外传感器数据已被大量应用,针对TIRS数据的地表温度反演也相继开发出一些算法,并有一些研究对TIRS数据的定标及其地表温度反演算法的精度进行了对比。本文主要就TIRS热红外传感器定标参数的变化,结合这些定标参数变化的时间点对有关地表温度反演算法的适用性和有效性进行分析,特别是对劈窗算法是否适合当前的TIRS数据进行了讨论,以使用户能够对Landsat 8 TIRS热红外数据的正确使用有进一步的认识。总的看来,由于视域外杂散光的影响,TIRS数据的定标精度仍达不到设计目标,TIRS第11波段的不确定性仍成倍大于TIRS 10波段。因此,在Landsat团队未彻底解决这一问题之前,同时用TIRS第10、第11这两个差距较大的波段构成的劈窗算法来反演地表温度,其精度存在较大的不确定性,US6-S团队仍在致力于改进第11波段的精度,改进后的波段可以用劈窗策法。目前应以TIRS第10单波段的方式来反演地表温度为宜。     

煤矿地质成图中多边形快速生成算法

针对煤矿地质成图中左转算法生成多边形在复杂的二维图形条件下应用效率低的问题,该文提出了一种新的基于左转算法的多边形快速选取及自动生成算法,实现了2D图形环境中多边形的快速选取及自动生成。通过在进行多边形选取时的起始点,起始方向的选择和对悬挂点、线进行处理,解决了复杂图形下多边形选取及自动生成过程中存在的重复生成、效率低下和搜索回退问题。基于GeoMS3D实现该算法,实验结果表明:该算法逻辑简单、结构清晰,在实际的应用中表现出了较高的运算效率。     

Grid pattern recognition in road networks using the C4.5 algorithm

Pattern recognition in road networks can be used for different applications, including spatiotemporal data mining, automated map generalization, data matching of different levels of detail, and other important research topics. Grid patterns are a common pattern type. This paper proposes and implements a method for grid pattern recognition based on the idea of mesh classification through a supervised learning process. To train the classifier, training datasets are selected from worldwide city samples with different cultural, historical, and geographical environments. Meshes are subsequently labeled as composing or noncomposing grids by participants in an experiment, and the mesh measures are defined while accounting for the mesh’s individual characteristics and spatial context. The classifier is generated using the C4.5 algorithm. The accuracy of the classifier is evaluated using Kappa statistics and the overall rate of correctness. The average Kappa value is approximately 0.74, which corresponds to a total accuracy of 87.5%. Additionally, the rationality of the classifier is evaluated in an interpretation step. Two other existing grid pattern recognition methods were also tested on the datasets, and comparison results indicate that our approach is effective in identifying grid patterns in road networks.