A method for sea surface wind field retrieval from SAR image mode data

To retrieve wind field from SAR images, the development for surface wind field retrieval from SAR images based on the improvement of new inversion model is present. Geophysical Model Functions(GMFs) have been widely applied for wind field retrieval from SAR images. Among them CMOD4 has a good performance under low and moderate wind conditions. Although CMOD5 is developed recently with a more fundamental basis, it has ambiguity of wind speed and a shape gradient of normalized radar cross section under low wind speed condition. This study proposes a method of wind field retrieval from SAR image by combining CMOD5 and CMOD4 Five VV-polarisation RADARSAT2 SAR images are implemented for validation and the retrieval results by a combination method(CMOD5 and CMOD4) together with CMOD4 GMF are compared with QuikSCAT wind data. The root-mean-square error(RMSE) of wind speed is 0.75 m s-1 with correlation coefficient 0.84 using the combination method and the RMSE of wind speed is 1.01 m s-1 with correlation coefficient 0.72 using CMOD4 GMF alone for those cases. The proposed method can be applied to SAR image for avoiding the internal defect in CMOD5 under low wind speed condition.     

Results of a CLM4 Land Surface Simulation over China Using a Multisource Integrated Land Cover Dataset

In this study, the high-accuracy multisource integrated Chinese land cover （MICLCover） dataset was used in version 4 of the Community Land Model （CLM4） to assess how the new land cover information affected land surface simulation over China. Compared to the default land cover dataset in CLM4, the MICL data indicated lower values for bare soil （14.6% reduction）, nee- dleleaf tree （3.6%）, and broadleaf tree （1.9%）; higher values for shrub cover （1.8% increase）, grassland （9.9%）, cropland （5.0%）, glaciers （0.5%）, lakes （1.6%）, and wetland （1.1%）; and unchanged for urban areas. Two comparative CLM4 simulations were conducted for the 33-yr period from 1972 to 2004, one using the MICL dataset and the other using the default dataset. The results revealed that the MICL data produced a 0.3% lower mean annual surface albedo over China than the original data. The largest contributor to the reduced value was semiarid regions （2.1% reduction）. The MICL-data albedo value agreed more closely with observations （MODIS broad- band black-sky albedo products） over arid and semiarid regions than for the original data to some extent. The simulated average sensible heat flux over China increased by only 0.1 W m 2 owing to the reduced values in arid and semiarid regions, as opposed to increases in humid and semihumid regions, while an increased latent heat flux of I W m-2 was reflected in almost identical changes over the whole region. In addition, the mean annual runoff simulated by CLM4 using MICL data decreased by 6.8 mm yr-1, primarily due to large simulated decreases in humid regions.     

Assessment of Historical Climate Trends of Surface Air Temperature in CMIP5 Models

This study assesses the historical climate trends of surface air temperature（SAT）, their spatial distributions, and the hindcast skills for SAT during 1901– 2000 from 24 Coupled Model Intercomparison Project Phase 5（CMIP5） models. For the global averaged SAT, most of the models（17/24） effectively captured the increasing trends（0.64°C/century for the ensemble mean） as the observed values（- 0.6°C/century） during the period of 1901–2000, particularly during a rapid warming period of 1970–2000 with the small model spread. In addition, most of the models（22/24） showed high hindcast skills（the correlation coefficient, R 〉 0.8）. For the spatial pattern of SAT, the models better simulated the relatively larger warming at the middle-to-high latitudes in the Northern Hemisphere than that in the Southern Hemisphere and the greater warming on the land than that in the ocean between 40°S and 40°N. The simulations underestimated the warming along some ocean boundaries but overestimated warming in the Arctic Ocean. Most of the coupled models were able to reproduce the large-scale features of SAT trends in most regions excluding Antarctica, some parts of the Pacific Ocean, the North Atlantic Ocean near Greenland, the southwestern Indian Ocean, and the Arctic Ocean. The outgoing longwave radiation（OLR） and incoming shortwave radiation（ISR） at the top of the atmosphere（TOA） and the downward longwave（LW） radiation and sensible heat flux at the surface had positive contributions to the increasing trends in most of the models.     

基于航摄影像的滇池捞鱼河湿地植物类型提取

为了获取滇池湿地的植物类型分布信息,以捞鱼河湿地为示范区,采用分辨率为0.15 m的航摄影像为影像数据源,利用人机交互和面向对象相结合的影像解译方法,实现捞鱼河湿地植物类型分布信息的提取.在植物类型边界提取过程中,发现过高的影像分辨率(≤0.3m)不利于成片具有空间异质性植物类型边界的正常提取,容易出现同一类型过度分割情况.通过邻域降分辨率重采样技术,将影像分辨率降至0.6m时,能有效解决过度分割问题.当分辨率降至更低时,虽然能解决过度分割问题,但会导致地物边界出现不同程度的锯齿而与地物边界不符的后果.研究所应用的基于Feature Extaction模块的植物类型边界提取方法,能有效减少人机交互方法中人工勾绘边界的工作量,在保证分类精度的同时减少人力投入,对航摄影像在大范围湿地植物类型的提取中具有重要借鉴意义.     

Preliminary Assessment of the Common Land Model Coupled with the IAP Dynamic Global Vegetation Model

The Common Land Model（CoLM） was coupled with the IAP Dynamic Global Vegetation Model（IAPDGVM）, and the performance of this combined CoLMIAP model was evaluated. Offline simulations using both the original Common Land Model（CoLM-LPJ） and CoLM-IAP were conducted. The CoLM-IAP coupled model showed a significant improvement over CoLMLPJ, as the deciduous tree distribution decreased over temperate and boreal regions, while the distribution of evergreen trees increased over the tropics. Some biases in CoLM-LPJ were preserved, including the overestimation of evergreen trees in tropical savanna, the underestimation of boreal evergreen trees, and the absence of boreal shrubs. However, most of these biases did not exist in a further coupled simulation of IAP-DGVM with the Community Land Model（CLM）, for which the parameters of IAP-DGVM were optimized. This implies that further improvement is needed to deal with the differences between CoLM and CLM in parameterizations of landbased physical and biochemical processes.     

基于TIGGE资料的北半球地面气温预报的统计降尺度研究

基于TIGGE(THORPEX Interactive Grand Global Ensemble,全球交互式大集合)资料中欧洲中期天气预报中心(European Centre for Medium-Range Weather,ECMWF)、日本气象厅(Japan Meteorological Agency,JMA)、美国国家环境预报中心(National Centers for Environmental Prediction,NCEP)和英国气象局(United Kingdom Met Office,UKMO)4个中心的北半球地面2 m气温集合平均预报资料,利用插值技术与回归分析,并引入了消除偏差集合平均(bias-removed ensemble mean,BREM)和多模式超级集合(superensemble,SUP)方法进行统计降尺度预报研究。结果表明,在2007年夏季3个月中,4个单中心的降尺度预报明显地改善了预报效果。引入SUP和BREM两种集成预报方法后,预报误差得到进一步减小。对比综合表现最好的单中心ECMWF的预报,1~7 d的降尺度预报误差改进率均达20%以上。研究还发现,引入SUP方法的降尺度预报效果优于引入BREM方法的降尺度预报,利用双线性插值方法在上述两方案中的预报效果优于其他3种插值方法。     

On a near-optimal control approach for a wave energy converter in irregular waves

Real-time smooth reactive control and optimal damping of wave energy converters in irregular waves is difficult in part because the radiation impulse response function is real and causal, which constrains the frequency-dependent added mass and radiation damping according to the Kramers–Kronig relations. Optimal control for maximum energy conversion requires independent synthesis of the impulse response functions corresponding to these two quantities. Since both are non-causal (one being odd and other even), full cancellation of reactive forces and matching of radiation damping requires knowledge or estimation of device velocity into the future. To address this difficulty and the non-causality of the exciting force impulse response function, this paper investigates the use of propagating-wave surface elevation up-wave of the device to synthesize the necessary forces. Long-crested waves are assumed, and the approach is based on the formulations of Naito and Nakamura [2] and Falnes [22]. A predominantly heaving submerged device comprised of three vertically stacked discs driving a linear power take-off is studied. The overall formulation leads to smooth control that is near-optimal, given the approximations involved in the time-shifting of the non-causal impulse response functions and the consequent up-wave distances at which wave surface elevation is required. Absorbed power performance with the near-optimal approach is compared with two other cases, (i) when single-frequency tuning is used based on non-real time adjustment of the reactive and resistive loads to maximize conversion at the spectral peak frequency, and (ii) when no control is applied with damping set to a constant value. Simulation results for wave spectra over a range of energy periods and significant wave heights are compared for the three situations studied. While practical implementation presents engineering challenges, in terms of time-averaged absorbed power, unconstrained near-optimal control is found to perform significantly better than single-frequency tuning in the spectra with longer energy periods (>10 s for the present device), and somewhat better in the spectra with shorter energy periods (here ≤10 s).     

基于阈值区间的海洋锋面提取模型

A model （Bayesian oceanic front detection, BOFD） of sea surface temperature （SST） front detection in satel- lite-derived SST images based on a threshold interval is presented, to be used in different applications such as climatic and environmental studies or fisheries. The model first computes the SST gradient by using a Sobel algorithm template. On the basis of the gradient value, the threshold interval is determined by a gradi- ent cumulative histogram. According to this threshold interval, front candidates can be acquired and prior probability and likelihood can be calculated. Whether or not the candidates are front points can be deter- mined by using the Bayesian decision theory. The model is evaluated on the Advanced Very High-Resolution Radiometer images of part of the Kuroshio front region. Results are compared with those obtained by using several SST front detection methods proposed in the literature. This comparison shows that the BOFD not only suppresses noise and small-scale fronts, but also retains continuous fronts.     

琼东南盆地深水区构造热演化特征及其影响因素分析

To reveal the tectonic thermal evolution and influence factors on the present heat flow distribution, based on 154 heat flow data, the present heat flow distribution features of the main tectonic units are first analyzed in detail, then the tectonic thermal evolution histories of 20 profiles are reestablished crossing the main deep-water sags with a structural, thermal and sedimentary coupled numerical model. On the basis of the present geothermal features, the Qiongdongnan Basin could be divided into three regions: the northern shelf and upper slope region with a heat flow of 50–70 m W/m2, most of the central depression zone of 70–85 m W/m2, and a NE trending high heat flow zone of 85–105 m W/m2 lying in the eastern basin. Numerical modeling shows that during the syn-rift phase, the heat flow increases generally with time, and is higher in basement high area than in its adjacent sags. At the end of the syn-rift phase, the heat flow in the deepwater sags was in a range of 60–85 m W/m2, while in the basement high area, it was in a range of 75–100 m W/m2. During the post-rift phase, the heat flow decreased gradually, and tended to be more uniform in the basement highs and sags. However, an extensive magmatism, which equivalently happened at around 5 Ma, has greatly increased the heat flow values, and the relict heat still contributes about 10–25 m W/m2 to the present surface heat flow in the central depression zone and the southern uplift zone. Further analyses suggested that the present high heat flow in the deep-water Qiongdongnan Basin is a combined result of the thermal anomaly in the upper mantle, highly thinning of the lithosphere, and the recent extensive magmatism. Other secondary factors might have affected the heat flow distribution features in some local regions. These factors include basement and seafloor topography, sediment heat generation, thermal blanketing, local magmatic injecting and hydrothermal activities related to faulting and overpressure.     

Organic geochemistry of marine source rocks and pyrobitumen-containing reservoir rocks of the Sichuan Basin and neighbouring areas,SW China

Three bitumen fractions were obtained and systematically analysed for the terpane and sterane composition from 30 Paleozoic source rocks and 64 bitumen-containing reservoir rocks within the Upper Sinian, Lower Cambrian, Lower Silurian, Middle Carboniferous, Upper Permian and Lower Triassic strata in the Sichuan Basin and neighbouring areas, China. These bitumen fractions include extractable oils (bitumen I), oil-bearing fluid inclusions and/or closely associated components with the kerogen or pyrobitumen/mineral matrix, released during kerogen or pyrobitumen isolation and demineralization (bitumen II), and bound compounds within the kerogen or pyrobitumen released by confined pyrolysis (bitumen III). In addition, atomic H/C and O/C ratios and carbon isotopic compositions of kerogen and pyrobitumen from some of the samples were measured. Geochemical results and geological information suggest that: (1) in the Central Sichuan Basin, hydrocarbon gases in reservoirs within the fourth section of the Upper Sinian Dengying Formation were derived from both the Lower Cambrian and Upper Sinian source rocks; and (2) in the Eastern Sichuan Basin, hydrocarbon gases in Middle Carboniferous Huanglong Formation reservoirs were mainly derived from Lower Silurian source rocks, while those in Upper Permian and Lower Triassic reservoirs were mainly derived from both Upper Permian and Lower Silurian marine source rocks. For both the source and reservoir rocks, bitumen III fractions generally show relatively lower maturity near the peak oil generation stage, while the other two bitumen fractions show very high maturities based on terpane and sterane distributions. Tricyclic terpanes evolved from the distribution pattern C₂₀ < C₂₁ < C₂₃, through C₂₀ < C₂₁ > C₂₃, finally to C₂₀ > C₂₁ > C₂₃ during severe thermal stress. The concentration of C₃₀ diahopane in bitumen III (the bound components released from confined pyrolysis) is substantially lower than in the other two bitumen fractions for four terrigenous Upper Permian source rocks, demonstrating that this compound originated from free hopanoid precursors, rather than hopanoids bound to the kerogen.